Quote:
Originally Posted by gecko.ch
thank you.
this 2 values i dont' have
3001 EXBOX ACTIVE_PDC_FLANKENBREMSUNG nicht_aktiv 0x00
3001 EXBOX ACTIVE_PDC_DEFAULT_ON nicht_aktiv 0x00
but i try with
3001 exbox > pdc_flankenschutz > nicht_aktiv 0x00
and now i think it looks good, but i dont know how the park assist works without Flankenschutz.
do you have the value "pdc_flankenschutz"?
|
The two values you do not have may be due to different ilevel versions.
Regarding "pdc_flankenschutz", yes I do have this parameter set to aktiv 0x01.
Since I have responded incrementally on my setting over 2 posts, I will summarize my PDC/PMA related settings below:
3001 exbox > communication_parkmaster > gen2 0x02
3001 exbox > macro_pma_einparken > gen2_ohne_konf 0x03
3001 exbox > auto_pdc > aktiv 0x01
3001 exbox > pdc_flankenschutz > aktiv 0x01
3001 exbox > pdc_generation > gen1 0x00
3001 exbox > pdc_sensor_hinten > 4_sensoren 0x01
3001 exbox > pdc_sensor_vorn > 4_sensoren 0x01
3001 EXBOX MACRO_PDC aktiv 0x01
3001 EXBOX PDC_ABSTAENDE_VERSION alt 0x00
3001 EXBOX PDC_DIRECTION vertikal 0x00
3001 EXBOX PDC_3D nicht_aktiv 0x00
3001 EXBOX ACTIVE_PDC_FLANKENBREMSUNG nicht_aktiv 0x00
3001 EXBOX ACTIVE_PDC_DEFAULT_ON nicht_aktiv 0x00
3001 EXBOX ACTIVE_PDC nicht_aktiv 0x00
3001 EXBOX PDC_DARSTELLUNG_V2 aktiv 0x01
3005 DISPLAY_PIP_CONFIG ZIN_SEMI_PERMANENT_DISPLAYS_PDC_PMA nicht_activ 0x00
3000 HMI CURSORPOSITION_PMA_AUSRICHTUNG laengs 0x00
3000 HMI PMALQ_BEDIENUNG mit_Dauerdruck 0x01
3001 EXBOX MACRO_PMA_AUSPARKEN nicht_aktiv 0x00
If you wish to compare CAFD files, please PM a email address and I will send to you my CAFD file.
Larry