Quote:
Originally Posted by Noelified
Ha Ha, yeah I couldn't help but throw that switch up there, I didn't even know those existed when I started looking for a simple toggle.
You make a good point about overloading. I'll look use a good 12v connection and use a 12v USB adapter. There is one where I was referring to, between the cup holders, and I never use it anyway. I also like your idea of Y adapting the OBD. Post what you come up with for that.
You will find PLENTY of room behind part 5. I made a Y harness to adapt the LCI dual illuminated dash trim and ran it through from the foot well light.
|
12v USB Adapter is not going to output the kind of amperage a Pi wants.