|
Hi guys,
F31 LCI 2016, ENET interface. INPA working good, of course EDIABAS.ini configured properly with ENET interface set. On HU Service Manager I still get the "92: SYS-0002: ECU OBJECT FILE NOT FOUND" error. Seems that some file required to connect to the HU unit misses, or it cannot be found.
IP get settled automatically, 169 apipa range.. and communication doesn't seem to be the issue, as other prg as INPA work fine, launching the EDIABAS with green light, etc.
ECU file path also configured correctly, i found the nbt.prg file inside. (also must mention that ecu path is configured to point to this folder inside ediabas.ini.)
So, does anybody have a clue, or managed to get over this?
Appreciate your help.
Cheers.
|