|
Really appreciate the effort of this post, thank you!
To add, I too wanted the OEM look and went about my work in a similar route.
I purchased a 'used' rear fuse distribution board [which included its wiring loom plugs] from a well-known auction website [I paid £20 UK Pounds].
I needed a blue wiring loom plug to connect to the constant live fused ports numbered 112-117 for my F34. Each loom plug is unique to each port of the board 'however' by trimming the raised plastic keyway of the loom plug, they will fit elsewhere in similar shaped port.
I also re-used the existing pins of my purchased blue wiring loom plug by carefully de-pinning the loom plug, soldering the new wire and re-pinning the loom plug.
|