View Single Post
      04-25-2016, 10:50 AM   #54
R12ax7's Avatar

Drives: 2021 340xi
Join Date: Mar 2008
Location: Philly

iTrader: (3)

Garage List
2011 328i  [0.00]
Originally Posted by anshu View Post
Did this over the weekend. I was able to get the OEM markers off pretty easily using some Turtle Wax Adhesive Remover spray and a screwdriver from the back side of the reflector.

But now I'm having a very annoying issue. After cleaning off all the old molding tape and even lightly sanding down the inside of the bumper to get ALL the residue off, my reflectors are not sticking to the bumper all the way. on the m sport, the long edge closer to the wheel has pulled away from the reflector adhesive and won't stay no matter how long i hold it pressed together.

Anyone else have this issue? Thinking about redoing this whole thing and carefully using betalink or something to make the reflector stick all the way around.
Never had this issue and have done quite a few of these. What kind of double sided tape did you use? Is it possible the bumper got deformed a bit in prying the original reflector out?
Current: 2021 340xi

2018 330xi | 2016 340i 6MT | 2013 335i 6MT |
2011 328i 6MT (N52) | 2008 335xi (N54)
Appreciate 0