Quote:
Originally Posted by thejeremyman9
Does the evo fit without any modifications but the TU requires modifications?
|
Both evo and TU will need the same modifications to get the base plate to fit onto our N55 vacuum pump holes. You'll need to dremel out the correct hole locations. I'm still a little vague about the harness, but it will ultimately be pretty easy considering the worst we'll do is to cut the harness' plug and rewire it somehow because there are a bunch of B58 hpfp harness extenders you can buy for cheap; no big deal.
__________________
2015 X535i - CP Piston, Manley Rod, ACL/King bearings, MILVs VRSF full charge Pipe, Wagner FMIC, Hybrid Turbo, MHD2+ VRSF DP, UR Front/Rear Sway Bars, Eibach springs, Bilstein B6
2015 MINI COOPER - Mahle Pistons, Max Rods, BMS intake, CTS charge pipe, Wagner Intercooler, ByteTronik Tune, VRSF DP
2017 540i - MHD2+, VRSF DP, TU Pump