View Single Post
      10-20-2021, 12:34 PM   #8
thejeremyman9
Major General
thejeremyman9's Avatar
4364
Rep
7,606
Posts

Drives: 2015 BMW 335i
Join Date: May 2019
Location: Cali

iTrader: (0)

Quote:
Originally Posted by Ashhong View Post
Well directly after the vcg I did the ofhg. Not sure if it had this issue in between. The CP has already been replaced but I am going to double check my install today


Funny you mention that, we saw that hole during the install and were freaking out why there's no hose. I still need to verify that I have an EWG but there's def no hose so im sure I do. Will check that other hose today


Is the CCV hose that second hose mentioned above? No we didn't pressurize, just put smoke in. And the MAF is the one on the intake right? We cleaned it but didn't try turning on the car with it unplugged. I'll try that as well
Yeah CCV hose is the one with the insulation over it, goes from VC to turbo inlet, and clips on the VC with the 4 prongs. You can't really see the hose itself because of the insulation, and it can become brittle and crack where you can't see it.

MAF is on the intake yes, right after the airbox.

OFHG shouldn't have the potential for a vacuum leak, but VC does.
Appreciate 0