Quote:
Originally Posted by thejeremyman9
Quote:
Originally Posted by Ashhong
Thanks for the info, I'll check out that vc thread butttt
I removed the MAF now, but not at a cold start, and the issue was gone! Plugged it back in and it came back immediately.
So now from what I saw in the other thread, people remove the MAF on a cold start, let it run, turn it off, then plug it back in? Just ordered a new air filter and will do the MAF stuff after it comes in.
How can I reset the adaptations for the MAF? I only found instructions for the transmission
|
Well unplugging the MAF could have just covered up a vacuum leak since the issue with a vacuum leak is that it is letting in unmetered air lol.
You can reset adaptations with MHD/BM3, but if you don't have either of those, not sure if there are any free apps that can do so.
|
Ah that makes sense. I got a little excited. I checked the things mentioned above and everything seemed ok, tho I didn't get a good look at the CCV. Gonna wait and replace the filter and all that and we'll see…