Hello Community,
I am new into coding; I got the ENET cable few days ago and I did my first test using my 2016 F30:
FEM_BODY 3110
ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN aktiv Werte=01 Unfold Mirrors on vehicle unlock via Key Fob or Comfort Access.
ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN aktiv Werte=01 Fold Mirrors when holding lock on Key Fob or Comfort Access.
ASP_BEIKLAPPEN aktiv Werte=01
FEM_BODY 3053
KOMFORT_SCHLIESSEN Werte=00 Delay time to activate Convenience Closing via Key Fob or CA.
KOMFORTOEFFNUNG_FB aktiv Werte=00 Open Windows/Fold Mirrors when holding Unlock on Key Fob.
KOMFORTSCHLIESSUNG_FB aktiv Werte=00 Close Windows/Fold Mirrors when holding lock on Key Fob.
FEM_BODY 3060
ESS_AKTIVIERBARER_AUSGANG bremslicht_blinkend Werte=02 Change Emergency brake light from Inner Brake Lights to Flashing Lights.
http://f80.bimmerpost.com/forums/sho....php?t=1225913
FEM_BODY 3070
OVT_BEI_RUECKFAHRLICHT aktiv Werte=01 Door handle LEDs light up when engaged in Reverse
BKOMBI 3000
BMW_LOGO mpm Werte=01 Changes KOMBI/HUD startup to M/// Performance.
BC_DIGITAL_V aktiv Werte=01 Adds the vehicle’s current speed to the BC cycle list (Displays on KOMBI screen).
Everything went pretty well except for the BMW_LOGO. I am using the tools provided by TokenMaster: E-Sys_Setup-3.27.1_RC_b44813, ESysLauncherPremiumSetup_2.5.3_Build_108, and psdzdata_58.1_lite.
- Am I missing something in the configuration to have KOMBI/HUD startup to M/// Performance? I still have BMW logo and BMW Performance Drive
- Should I a get a recent version of psdzdata?
Thanks in advance for any help.