View Single Post
      07-13-2017, 05:48 PM   #11
Feloz
New Member
Guatemala
8
Rep
14
Posts

Drives: 2013 F30 320i
Join Date: May 2017
Location: Guatemala

iTrader: (0)

Thanks for your help Encanto. I tried to search for functionality with no luck.

There was a creative solution by someone that suggested a step-down voltage regulator in order to increase voltage but did not recommended this as it could cause other issues.

Later today Somebody that does retrofits constantly (For living) told me that this is normal behavior when connecting an Old NBT 2013 (PRE-LCI) with an new Screen (LCI) and that i have two options:

1) Flash old NBT (PRE-LCI) to the newest Data 58+. This will make necessary changes to adapt the new screen.

2) Buy an NBT-EVO Unit (I think my emulator supports both)

As stated at the beginning I did not want to flash the unit as I heard there is much risk, so I have decided to try to see if there is a local shop that does it. We will see, after this I will evaluate the options.

In the meantime is there anybody that has flash their NBT unit that can help us getting info and lessons learned?

I see several posts where they do not recommend to do this at home as you need constant flow of energy, others recommending the car to be off, etc...
Appreciate 0