Taken from another Thread...just incase someone else has the same issue.
Quote:
Originally Posted by trevneal2015
installed the pp86dsp and i cannot get my laptop to connect to the unit. i wasnt too worried before but i added a subwoofer amp but it will not get any signal from the bimmertech amp HELP!!!!
Quote:
Originally Posted by Earlybirdy
You need to download and install the driver FT232R USB UART. The driver and installation instructions can be found in the following link.
https://www.usb-drivers.org/ft232r-usb-uart-driver.html
I had the same connection problem with a laptop running Windows 10 and a Windows XP laptop. After installing the driver on both laptops, they connected to the amplifier.
Without the above driver installed, the DSP-PC-Tool software will stay in demo and not connect to the amplifier. |
|
Please remove .pdf extension when downloaded
BimmerTech's PP82DSP Amp Tune Files v3.20a / v3.28d .afpx
Courtesy of:
Drew46
fhlh ... . added 01/18/16 - (Details can be found on Post #39)
BimmerTech ... . added 2/2/16, 2/22/17 - (Details can be found on Post #49 & #109)
mtenhoven ... . added 2/5/16 - (Details can be found on Post #55)
saaltonen ... . added 2/29/16 - (Details can be found on Post #59)
arminvb ... . added 5/20/16 - (Details can be found on Post #83)
RoarinRow ... . added 8/02/16 - (Details can be found on Post #90)
Hyperlink ... . added 8/11/16 - (Details can be found on Post #95)
BimmerTech ... . added 9/04/16 - (Details can be found on Post #97)
saaltonen ... . added 4/17/17 - (Details can be found on Post #111)
pacman335 ... . added 5/21/17 - (Details can be found on Post #114)
valley_nomad ... . added 10/15/17 - (Details can be found on Post #210)
twodoor ... . added 01/15/18 - (LUV335 Edit - Details can be found on Post #220)
foveon ... . updated 1/31/18 - (Details can be found on Post #123)... ... My personal favorite!
LongRuf ... . added 02/04/19 - (Details can be found on Post #310)
vithy ... . added 11/02/19 - (foveon Edit V9 - Details can be found on Post #345)
danyro ... . added 1/25/20 - (Details can be found on Post #353)
.