Yesterday, 10:35 AM | #3 |
Private
56
Rep 90
Posts |
Not a lot to do in that area so you really just need patience. It’s a pita. Can be easier if you drop your IC and cutting your old pipe for removal also saves some time. Another tip is put some thought into how you align the clamps as you don’t want to get it together and then realize you can’t get to the screw on the clamp bc it’s in the wrong position. Ask me how I know 😒
|
Appreciate
0
|
Today, 04:23 AM | #5 |
Private
18
Rep 51
Posts |
Orings were not included with the pipe. The upper is listed as an Oring but the lower (at the intercooler) is listed as a preformed seal. It is directional in how it is installed so be mindful of this.
__________________
|
Appreciate
0
|
Today, 03:24 PM | #6 |
BimmerPost Supporting Vendor
24496
Rep 191,501
Posts |
O-ring and C-clip not included; if you lost the stock ones, you are going to need to buy new hardware
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|