07-29-2023, 04:02 AM | #1 |
Private First Class
141
Rep 180
Posts |
Can I upgrade from 6.5 to 8.8 inch screen
Hi all, I've searched the forum but can't find anything specific. When looking online I'm getting conflicting information. I believe I have CIC set up ( vin decoder information is below ) but online it says CIC should have a cd button where my media button is and I've also read that CIC video cable has 4 pins, mine had 6? Looking at my screen it says BMW L7 mid, there is also a BMW L7 high screen available which is larger, part number 9292248. Question is can I upgrade to this larger screen. I have attached photos below of my current idrive system. The controller originally had the small round dial on it, it is only a large one now as I have stuck it over the top of the small one.
|
07-29-2023, 05:29 AM | #2 | |
Private First Class
141
Rep 180
Posts |
Quote:
|
|
Appreciate
0
|
07-29-2023, 08:22 AM | #3 |
Major General
3719
Rep 8,636
Posts |
What’s the build date, CIC in the F30 was only up to 11/2012, after that should be NBT. Most likely to be NBT…..
https://integratedautomotive.co.uk/w...ion-do-i-have/ |
Appreciate
0
|
07-29-2023, 08:28 AM | #4 |
Private First Class
141
Rep 180
Posts |
On vin decoder my production date is showing as 20.06.2013.
My display has the red outline around the selection which points towards CIC... so confused! |
Appreciate
0
|
05-17-2024, 10:43 AM | #5 |
Major
897
Rep 1,126
Posts |
For those with LCI cars and the ENTRYNAV HU, I fitted an 8.8" screen today to my 2016 330d.
It was a lot easier than I was expecting! https://f30.bimmerpost.com/forums/sh...postcount=1135 I fitted the screen in preparation for a Carplay MMI box. No one wants the 6 inch life with Carplay. |
Appreciate
1
danb19792016.50 |
05-18-2024, 03:31 AM | #6 | |
Second Lieutenant
142
Rep 200
Posts |
Quote:
|
|
Appreciate
0
|
05-18-2024, 07:34 AM | #7 | |
Major
897
Rep 1,126
Posts |
Quote:
All the split screen stuff works as it should and it seems to boot up faster as well, and faster response to the Idrive knob commands, which I didn't expect. I didn't know the screen had that kind of influence over the HU. Well worth doing as the small screen just looks rubbish with the massive borders. A waste of real estate |
|
Appreciate
1
YODI141.50 |
05-20-2024, 03:05 AM | #8 |
Coding ECU's remotely
449
Rep 1,182
Posts |
You need an APIX2 screen for that car, a screen from a 2015 model is not correct.
__________________
Author of Car Connector - remote ICOM & ENET tool - Built in VPN for easy coding and remote diagnostics
Car Connector on YouTube |
Appreciate
0
|
05-21-2024, 03:19 AM | #9 |
Second Lieutenant
142
Rep 200
Posts |
|
Appreciate
0
|
05-21-2024, 04:53 AM | #11 |
Coding ECU's remotely
449
Rep 1,182
Posts |
You need PN: 65508709339
__________________
Author of Car Connector - remote ICOM & ENET tool - Built in VPN for easy coding and remote diagnostics
Car Connector on YouTube |
Appreciate
1
YODI141.50 |
05-22-2024, 06:34 AM | #12 |
Private
30
Rep 61
Posts |
I fitted a 9339 successfully to a 2019 touring on the previous car
Coded the following 3005 DISPLAY_PIP_CONFIG > CID_DISPLAY_RES = 1280_480 3005 DISPLAY_PIP_CONFIG > CID_DISPLAY_SIZE = 8_8 3001 DISPLAY_VARIANTE = breites_display 3006 NAVIGATION > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480 3005 DISPLAY_PIP_CONFIG > CID_TOUCH = aktiv 300B TOUCH_COMMAND > CID_HMI_TOUCH = aktiv Worked perfectly for mine |
Appreciate
1
YODI141.50 |
Post Reply |
Bookmarks |
|
|