05-16-2024, 04:27 PM | #1 |
Registered
0
Rep 3
Posts |
Featured on BIMMERPOST.com |
05-18-2024, 04:09 AM | #2 |
Private First Class
41
Rep 161
Posts |
The curtesy lights (door handels) are powered from the FEM A173*B9 pin 52. The light in switches etc. are FEM A173*B9 pin 53. The foodwell lights are color 1, A173*B9 pin 50 and color 2 is pin 51
|
Appreciate
0
|
05-19-2024, 12:34 PM | #3 |
Registered
0
Rep 3
Posts |
I’m not that well versed in the electrical part of all this but I am trying to figure out if there is a way, through like bimmercode or some other utility, to make the ambient lights in the car already to always stay on. I’ll attach a picture of where I get my power from but the goal is to make that stay on in the daytime too and decouple it from the headlights.
|
Appreciate
0
|
05-20-2024, 03:03 AM | #4 |
Private First Class
41
Rep 161
Posts |
OK, see what you are doing. The two white wires wit color stribes are from pin 50 and 51 on the FEM.
There should be ways to programme the FEM light- I have not worked with that so other assistance from net. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|