[RustyTurbo]

Originally Posted by Jason954x

Check your inbox

Please share it with me as well

[iliannavy]

Originally Posted by RustyTurbo

Please share it with me as well

Hello.
After enabling SLI.I have it on HUD but on the cluster disappear.
Before I has it on both.

[alex.belgrade]

Hi baiibyy
Did you try SLI in Serbia recently?

[kubax86]

Originally Posted by alex.belgrade

Hi baiibyy
Did you try SLI in Serbia recently?

Yes, it works

[ilhankurudere]

Hello guys

I’m trying to retrofit the sli module on my bmw f45 (2015) i have the half digital cluster and it does support sli and i also have the kafas camera already installed from the factory, i have connected the sli module correctly and coded correctly aswell but i only cannot find the [SPEED_LIMIT_GENERATION] i can see the speed limit info in my hud and also on the cluster but my problem is that it does keep flickering and not staying as it should. I testdrive it and it changes correctly the speedlimit if i make a turn to a different speedzone. I have recorded but i cannot upload it here for some reason? You can ask me for the video. Can anyone help me out with this problem i hope the module is broken or something.

[scouse stelth]

I am having trouble coding mine with bimmer utility it does not have the opinion to donor for some reason.

[cbcharlie]

Originally Posted by Jason954x

I finally added the Speed Limit Info without KAFAS.

Can you share how you accomplished this with me as well?

[kubax86]

Originally Posted by cbcharlie

Can you share how you accomplished this with me as well?

Emulator

[NxTH]

Originally Posted by cbcharlie

Can you share how you accomplished this with me as well?

https://f30.bimmerpost.com/forums/sh...&postcount=675

[scouse stelth]

Originally Posted by Variante Alta

I got an emulator and the coding that accompanied it is quite good and extensive. The easiest is to FA code to your car but if you need to FLD code it, here are some thing to look for (not all are needed in every car model).

F-Series - KOMBI Ecu

ANZEIGE_NPI = aktiv
KI_PIA_SPEED_LIMIT = aktiv
SPEED_LIMIT = aktiv
SPEED_LIMIT_GENERATION = sli_gen_2_npi
RCOG_TRSG_APPL = aktiv
RCOG_TRSG_TIMEOUT = aktiv

G-Series KOMBI Ecu

ADDITIONAL_SIGN_ENABLE = aktiv
ANZEIGE_NPI = aktiv
CB_TACHOZEIGERBAND = aktiv
CB_SLI_NPI = aktiv
PIA_SLI_NPI = aktiv
RCOG_TRSG_APPL = aktiv (* See Notice below)
RCOG_TRSG_TIMEOUT = aktiv (* See Notice below)
SLI_PERMANENT_ENABLE = aktiv
SPEED_LIMIT_ENABLE = aktiv
TACHOZEIGERBAND_ENABLE = aktiv
NO_PASSING_ENABLE = aktiv
SPEED_LIMIT_UNIT_ENABLE = Wert_02( If you don't want to display speed unit kmh or mph, please set Wert_0 )

F / G Series - KOMBI Ecu
If your vehicle has a HUD (Head-Up Display) do these. Just ignore if you don't have a HUD.

HUD_NPI_ENABLE = aktiv
HUD_PIA_SPEED_LIM = aktiv
HUD_SPEED_LIMIT_ENABLE = aktiv
HUD_SLI_ENABLE = aktiv
PIA_HUD_SLI = aktiv
PIA_HUD_SLI_NPI = aktiv
PIA_HUD_SLI_PORTIERUNG = aktiv
PIA_HUD_VSLI = aktiv

Coding to be modified for HU_NBT or HU_NBT2 ECUs

SPEEDLIMIT_INFO = aktiv
SLI_NAVI_DISPLAY = nicht_aktiv


Check "Speed Limit Information" in the Instrument cluster settings for the HUD - check box as needed.

I have coded mine to work in the instrument cluster but not all them options are there for hud and the ones that are there I have done but it does not seem to be working in the hud.

[kubax86]

Originally Posted by scouse stelth

I have coded mine to work in the instrument cluster but not all them options are there for hud and the ones that are there I have done but it does not seem to be working in the hud.

Injected FSC as well?

[scouse stelth]

Originally Posted by kubax86

Injected FSC as well?

Don't get what you mean??

[scouse stelth]

Anyone

[kubax86]

Originally Posted by scouse stelth

Anyone

For SLI you need coding and FSC in KAFAS2 or Emulator

[scouse stelth]

Originally Posted by kubax86

For SLI you need coding and FSC in KAFAS2 or Emulator

I have installed a map based one on the rear of my instrument cluster and coded that but I cannot get it to work on my hud

[Siki78]

did you fdl code in kombi and activate in hu
F / G Series - KOMBI Ecu
If your vehicle has a HUD (Head-Up Display) do these. Just ignore if you don’t have a HUD.

HUD_NPI_ENABLE = aktiv
HUD_PIA_SPEED_LIM = aktiv
HUD_SPEED_LIMIT_ENABLE = aktiv
HUD_SLI_ENABLE = aktiv
PIA_HUD_SLI = aktiv
PIA_HUD_SLI_NPI = aktiv
PIA_HUD_SLI_PORTIERUNG = aktiv
PIA_HUD_VSLI = aktiv

[scouse stelth]

Originally Posted by Siki78

did you fdl code in kombi and activate in hu
F / G Series - KOMBI Ecu
If your vehicle has a HUD (Head-Up Display) do these. Just ignore if you don’t have a HUD.

HUD_NPI_ENABLE = aktiv
HUD_PIA_SPEED_LIM = aktiv
HUD_SPEED_LIMIT_ENABLE = aktiv
HUD_SLI_ENABLE = aktiv
PIA_HUD_SLI = aktiv
PIA_HUD_SLI_NPI = aktiv
PIA_HUD_SLI_PORTIERUNG = aktiv
PIA_HUD_VSLI = aktiv

Ok I’ll try these and get back to you but I am sure they all don’t come up when I see h for them.

[Al3xqq]

Can anyone help me please?

I had ordered this sli emulator https://a.aliexpress.com/_Ey4RGm9

Intalled and coded. In the dash have only 3 lines. From time to time, just a second when i start the engine shows the european circle with 3 lines and then the circle dissapear and remains just the 3 lines. This would made you think that is coded properly but not working.

I think it’s coded correctly and works because when i drive, it shows the red line on the speedometer for every limit if i overspeed, but i does not show the speed limit in a circle, down on the dash. This is my issue and i can’t find an exaplanation for this.

What you think? Is the module bad, or it still needs some extra coding?

F30, 2017, 6WB, nbt_evo, latest maps