[shawnsheridan]

Originally Posted by marwilliam

Hi guys, would be great to get a link. Time to DIY service the DCT! Cheers!

PM sent.

[ims1001]

Originally Posted by shawnsheridan

PM sent.

Thank you very much. After alot of back and forth finally managed to get it working. Much appreciated.

[shawnsheridan]

Originally Posted by ims1001

Thank you very much. After alot of back and forth finally managed to get it working. Much appreciated.

[darkbimm3r]

Hello! Need lastest ISTA link and have question better buy k+dcan usb adapter or esys adapter? Basic user + rear height adjustment.

[shawnsheridan]

Originally Posted by darkbimm3r

Hello! Need lastest ISTA link and have question better buy k+dcan usb adapter or esys adapter? Basic user + rear height adjustment.

PM sent.

If car is F11 as profile indicates, then you need an ENET Cable.

[darkbimm3r]

Originally Posted by shawnsheridan

PM sent.

If car is F11 as profile indicates, then you need an ENET Cable.

Yes, F11. Got link, thanks bro!

[harkes]

Can someone confirm that this version of ISTA+ is in fact working for I-level programming and not just for diagnostics???

[shawnsheridan]

Originally Posted by harkes

Can someone confirm that this version of ISTA+ is in fact working for I-level programming and not just for diagnostics???

Programming supported so long as you download the included SDP file and select it for install.

[harkes]

Originally Posted by shawnsheridan

Programming supported so long as you download the included SDP file and select it for install.

Excellent. Please share the download link, thanks

[shawnsheridan]

Originally Posted by harkes

Excellent. Please share the download link, thanks

PM sent.

[Smookin_Joe]

Hi shawnsheridan
You sir are a busy man!
I have a 2009 X5 E70 35d.
I was able to use ISTA + v4.12 to code a new injector (later versions couldn't).
I would like to be able to use ISTA P to register the battery properly and if need be register a new one.
I know it is scary and powerful...I have been watching videos that show how to tame it down and keep it focused on what I require.
If you have a link to ISTA P.. with, install instructions, keys and/or passwords?
May I please have it?

[harkes]

Torrent Download

https://drive.google.com/drive/folde...1fcG4ww02qAgUT

Maybe someone else can elaborate on the 4.32 and 4.39 differences?

[shawnsheridan]

Originally Posted by Smookin_Joe

Hi shawnsheridan
You sir are a busy man!
I have a 2009 X5 E70 35d.
I was able to use ISTA + v4.12 to code a new injector (later versions couldn't).
I would like to be able to use ISTA P to register the battery properly and if need be register a new one.
I know it is scary and powerful...I have been watching videos that show how to tame it down and keep it focused on what I require.
If you have a link to ISTA P.. with, install instructions, keys and/or passwords?
May I please have it?

PM sent.

[Smookin_Joe]

Originally Posted by shawnsheridan

PM sent.

Thank You!
I will definitely try my best to make use of it...

[cita85]

Hey.. is there a chance that I can get a connection too? I've always tried to find that and esys and ista thanks in advance

[shawnsheridan]

Originally Posted by cita85

Hey.. is there a chance that I can get a connection too? I've always tried to find that and esys and ista thanks in advance

PM sent.

[Dr_Bob]

Hi All. I would also like a link for ISTA+, please.

I have fixed simple issues on my 335d F31 such as a thermostat, EGR/inlet manifold decoke and various fluid changes, but mileage and age (the car not me, well maybe me too) dictates no more dealer service and DIY diagnostics and testing.

Thanks in advance.

[shawnsheridan]

Originally Posted by Dr_Bob

Hi All. I would also like a link for ISTA+, please.

I have fixed simple issues on my 335d F31 such as a thermostat, EGR/inlet manifold decoke and various fluid changes, but mileage and age (the car not me, well maybe me too) dictates no more dealer service and DIY diagnostics and testing.

Thanks in advance.

PM sent.

[bsturn]

I don't think I have enough posts yet to receive pms but if you're able to send me the link that'd be great, thanks!

[shawnsheridan]

Originally Posted by bsturn

I don't think I have enough posts yet to receive pms but if you're able to send me the link that'd be great, thanks!

PM sent.

[JSavory92]

Originally Posted by shawnsheridan

PM sent.

Thanks Shawn!! Managed to get installed successfully... however, I now have the dreaded "Vehicle could not be identified successfully. Check vehicle interface and 'PAD' active" when trying to identify the vehicle. It does see the car, as it sees the VIN and other basic details, but can't connect!
I'm using an ENET and ediabas is set to interface=ENET.
I've attached my log file not sure if you, or anyone else, can give any direction from that?

Any help would be much appreciated.... I'm nearly there just need someone to help me over the line

[shawnsheridan]

Originally Posted by JSavory92

Thanks Shawn!! Managed to get installed successfully... however, I now have the dreaded "Vehicle could not be identified successfully. Check vehicle interface and 'PAD' active" when trying to identify the vehicle. It does see the car, as it sees the VIN and other basic details, but can't connect!
I'm using an ENET and ediabas is set to interface=ENET.
I've attached my log file not sure if you, or anyone else, can give any direction from that?

Any help would be much appreciated.... I'm nearly there just need someone to help me over the line

No idea. Maybe check these 2 Threads out:

https://www.bimmerfest.com/threads/i.../post-13650875

https://www.bimmerfest.com/threads/s.../post-13920637