[Tony83]

I modified fsc.bat file as follow:
c:\EC-APPS\fsc a.hex 0x28 0x07 > code.txt
0x28 = Europe
0x07 = 2016

Should it work to install the europe road map next 2016-2?

Thanks a lot for your support

[shawnsheridan]

Originally Posted by Tony83

I modified fsc.bat file as follow:
c:\EC-APPS\fsc a.hex 0x28 0x07 > code.txt
0x28 = Europe
0x07 = 2016

Should it work to install the europe road map next 2016-2?

Thanks a lot for your support

0x28 = Europe PREMIUM
0x27 = 2016-2

[Tony83]

Thanks! I have another question: can I update with ignition on and engine off?

[shawnsheridan]

Originally Posted by Tony83

Thanks! I have another question: can I update with ignition on and engine off?

Europe PREMIUM is about a 45 minute install via USB and NEXT is about 25 minutes. Car needs power during this time.

[Tony83]

Thanks a lot!
I did everything.
The only big problem is that the road map folder is 28.9 gb and my pendrive has only 28.6gb Is there a way to copy the bmw road map in three different pendrive? I would'n buy another pendrive

[stmilosh]

Originally Posted by Tony83

Thanks a lot!
I did everything.
The only big problem is that the road map folder is 28.9 gb and my pendrive has only 28.6gb Is there a way to copy the bmw road map in three different pendrive? I would'n buy another pendrive

Use 3-USB version of maps, that way you can add missing files before last part update.

[stmilosh]

Originally Posted by shawnsheridan

Europe PREMIUM is about a 45 minute install via USB and NEXT is about 25 minutes. Car needs power during this time.

Time to install depends on the speed of USB. I used Ultra USB and it took me under 20mins to install Europe Premium.
It's perfectly safe to leave the car only with ignition on, since even if the car goes to sleep mode update will continue where it stopped once the power is restored.

[filius27]

Hello,

Where can I find a download for Europe Next 2016-2 for BMW F10 2012 NBT.

Thank you!

[Tony83]

Is it possible to add poi such as autovelox or similiar?
In Italy we have many many speed control station

[stmilosh]

Originally Posted by Tony83

Is it possible to add poi such as autovelox or similiar?
In Italy we have many many speed control station

No because CIC and NBT map content is encrypted.

[HFW003]

Originally Posted by Tony83

Is it possible to add poi such as autovelox or similiar?
In Italy we have many many speed control station

You would have to add them manually as individual POI's.

[Androdz]

I have a 2011 e90 328i. I want to update the navigation. What do I need to buy to installed the road map update?

MY usb is 8gb. Do I need to buy a bigger one?

[Jebote]

What should the Hex be for "Europe MOTION 2016-2 West"?

Thank you in advance

[shawnsheridan]

Originally Posted by Jebote

What should the Hex be for "Europe MOTION 2016-2 West"?

Thank you in advance

0x47 0x27

[TePee]

We have a BMW with CIC in the family and 64Bit Win7 computer. I'd like to update to 2016-2 map.

Which program is best choice?
I've already tried FSC.exe, but it didn't work as it probably needs 32Bit computer system.

I already have the car's FSC grabbed via Esys.

Is it still not possible to have Premium Europe West + East maps at same time on CIC?

[shawnsheridan]

Originally Posted by TePee

We have a BMW with CIC in the family and 64Bit Win7 computer. I'd like to update to 2016-2 map.

Which program is best choice?
I've already tried FSC.exe, but it didn't work as it probably needs 32Bit computer system.

I already have the car's FSC grabbed via Esys.

Is it still not possible to have Premium Europe West + East maps at same time on CIC?

FSC.exe works fine on 32-Bit or 64-Bit Windows.

No, you can only have either West or East installed at any given time.

[TePee]

Thanks Shawn!

FSC.exe really works on 32bit Windows? Hmm, have I done something wrong?

Got orig. FSC via Esys, saved as xy.fsc in same directory as fsc.exe is.

Then DOS input:
C:>fsc.exe xy.fsc 0028 0x27 [7-digit VIN]

[shawnsheridan]

Originally Posted by TePee

Thanks Shawn!

FSC.exe really works on 32bit Windows? Hmm, have I done something wrong?

Got orig. FSC via Esys, saved as xy.fsc in same directory as fsc.exe is.

Then DOS input:
C:>fsc.exe xy.fsc 0028 0x27 [7-digit VIN]

Why do you say it does not work? Do you get MS-DOS error when you execute it?

If program runs without error, then it is compatable with Operating System. Now if you run program and get no code, or wrong code, then the issue is something with your process, and not the program itself.

[TePee]

Yes, it showed me some error. Unfortunately I don't remember anymore what exactly. But it was something with not accessible and 32-Bit.

[shawnsheridan]

Originally Posted by TePee

Yes, it showed me some error. Unfortunately I don't remember anymore what exactly. But it was something with not accessible and 32-Bit.

No idea then. It should work just fine.

[ilovecheesekake]

Originally Posted by stmilosh

This is not true at all.
All he needs is ENET i.e. OBD2 to LAN connector.
CIC is running ftp server that is very easily accessible and 1B can be extracted with a few clicks.
CIC ftp IP: 169.254.199.98, subnet: 255.255.255.0, Gateway: 169.254.199.99, any DNS
ftp://169.254.199.99

user/pass combinations (one should be working): root/Hm83stN or root/cic0803 or files/remote

Then navigate to HBpersistence/normal and download "generalPersistencyData_DiagnosticSWTControlle r" or the certificate backup
Data03 from /mnt/hbdebug/

From the file find hex sequence "01 01 00 1B" and pick first 319 bytes including this sequence. That is exactly 1B file.

Hi stmilosh! And thank you for giving me hope... Maybe you can help me out with my problem:
I have a E87 with 2010s maps which i would like to update. I've already downloaded the maps but am unable to pull the fsc-file from the car.
For diagnosis etc. i am successfully using ediabas / inpa with the obd connector. From what i've read online i can only pull the fsc through an ENET cable, which i have purchased and tried.
I have made according changes to the ediabas.ini (both manually and with a configurator software).
I have tried several different IPs, the closest i could get to accessing the cars computer was an error message, that password or username was incorrect.
But what puzzles me is this: In windows, under network and adapter settings it says that i don't have network connectivity. Is there anything else i need to make sure? Something more basic, like only allowing for ipv4 and not ipv6, setting the LAN network in some specific way? I feel like my problem is in the network settings, since even itoolradar doesn't show any IPs.
I hope you can help me out, i have tried to access the fsc through browser, filezilla and the SWID software, additionally tried it under linux, but no luck.
Maybe you can give me an idiots step-by-step instruction on how to get this file? That would really help me out!!!
Many thanks in advance!

[myszano1]

Hi guys.
Could anyone send me a FSC code generator for maps and instruction please.

Thanks in advance