08-31-2017, 06:11 AM | #67 |
Private
42
Rep 72
Posts |
So i tried to do this. connected the cables as instructed. got a new heating button and not working. ISTA gives the error below. I tried my friends steering column switch. still not working. anybody has an idea?
|
Appreciate
0
|
10-21-2017, 10:56 AM | #68 |
New Member
0
Rep 8
Posts |
3 wire connection from module
I want to tetrofit a heated steering wheel with vibration.
I see the following difference with all previous posts. I have a 3 wired connection to the 83*4B. The thicker wires ar masse and + i assume, but who knows where the thinner wire is used for? I have to connect the wires to the unused pins of the airbag connector but im confused about the thinner wire. Please can somebody help? |
Appreciate
0
|
11-12-2017, 05:43 AM | #69 |
Captain
134
Rep 765
Posts |
Good job guys. So doing it this way as opposed to David's guide (very nice too bro) do we not have to run wires to fuse box or relaxe the steering column cluster? I'm very technically inclined I'm jus not familiar with some of the wording. Lol
Thanks!! Also I'm going from f30 with no park assist or anything to regular heated steering wheel so basically I jus need the steering wheel n switch? |
Appreciate
0
|
11-15-2017, 02:28 PM | #70 |
New Member
2
Rep 20
Posts |
Hi, i hahe followed the procedure mine isn't working either, did you manage to make it work?
Last edited by talharama; 11-16-2017 at 11:51 AM.. |
Appreciate
0
|
11-16-2017, 01:31 AM | #71 |
Private
42
Rep 72
Posts |
|
Appreciate
0
|
11-16-2017, 12:00 PM | #73 | |
New Member
2
Rep 20
Posts |
Quote:
My heating button do not even lit up when i press it. I have ordered new SZL with heating function, lets see what happens. Last edited by talharama; 11-16-2017 at 02:38 PM.. |
|
Appreciate
0
|
11-16-2017, 12:24 PM | #74 |
New Member
2
Rep 20
Posts |
|
Appreciate
0
|
11-16-2017, 02:40 PM | #76 |
New Member
2
Rep 20
Posts |
|
Appreciate
0
|
11-17-2017, 12:01 PM | #77 | |
New Member
0
Rep 8
Posts |
Quote:
No idea what could be the problem |
|
Appreciate
0
|
11-17-2017, 02:36 PM | #79 |
New Member
2
Rep 20
Posts |
|
Appreciate
0
|
11-17-2017, 03:22 PM | #80 | |
New Member
0
Rep 8
Posts |
Quote:
But i have the idea i haven't got it coded right. Thats why i was wondering wich part of the embody i have to code. Another thins is that my car already has the power wires pre installed on the back of the szl but im doubting if the are active (have power 12v) I will also look at them in the morning.. |
|
Appreciate
0
|
11-17-2017, 03:24 PM | #81 | |
New Member
0
Rep 8
Posts |
Quote:
|
|
Appreciate
0
|
11-18-2017, 01:23 AM | #82 |
New Member
0
Rep 8
Posts |
What i wanted to say is:
My car has the 2 wires for 12v at the back of the SZL installed (pin 9 and 11) and as far as i can see they are factory installed (they are a part of the harness) but i do not measure power on the cable. Do i have to activate the 12v on the wires or is there a fuse? |
Appreciate
0
|
11-18-2017, 08:18 AM | #83 | |
New Member
2
Rep 20
Posts |
Quote:
Add option 248 to FA and code following ECU's FEMBODY ICM KOMBI I have also got two wires factory installed in the back of sz i have jist received the multimeter will check if they have power. l did you check with multimeter if yours has 12v power? Incase if it doesn't have the power you can follow instructions on this link; http://f30.bimmerpost.com/forums/sho....php?t=1231186 |
|
Appreciate
0
|
11-18-2017, 08:37 AM | #84 | |
New Member
2
Rep 20
Posts |
Quote:
|
|
Appreciate
0
|
11-18-2017, 03:44 PM | #85 |
New Member
0
Rep 8
Posts |
Thank you!
Im going to check once again at pin 9 and 11. Can you tell me which parts of Fembody, ICM and Kombi i have to change/code? I am searching but i can't really find a active/not active coding for the heated steering wheel. Only heating time. I would really appreciate it. |
Appreciate
0
|
11-18-2017, 05:18 PM | #86 | |
New Member
2
Rep 20
Posts |
Quote:
See the attached image as reference. I assume you know how to change cars FA? If not then Google it there is plenty instructions. |
|
Appreciate
0
|
11-18-2017, 05:19 PM | #87 | |
New Member
2
Rep 20
Posts |
Quote:
https://ibb.co/cvAKOR Last edited by talharama; 11-19-2017 at 02:28 AM.. |
|
Appreciate
0
|
11-19-2017, 03:22 AM | #88 | |
New Member
0
Rep 8
Posts |
Quote:
I didn't save the VO at the right way. Thanks for all the help Talharama. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
f30, heated, heating, steering, wheel |
|
|