05-24-2018, 03:26 PM | #178 |
Captain
134
Rep 765
Posts |
Just wondering if u ended up using the rear holders for the front? lol he price is not 10$ difference. Rear is 17$ n front is $60+ at my local shop. My bumper is non sport so I may jus try using the back but before I ordered was hoping someone could add alil more info on this. Even tho the rear ones are labeled I don’t see a difference between them at all. Any help would b appreciated. Thanks.
|
Appreciate
0
|
07-20-2018, 06:11 AM | #179 |
Enlisted Member
3
Rep 48
Posts |
|
Appreciate
0
|
07-25-2018, 05:58 PM | #180 |
New Member
0
Rep 11
Posts |
Pictures are missing
|
Appreciate
0
|
07-26-2018, 12:20 PM | #181 |
New Member
2
Rep 19
Posts |
Hey Guys,
I'm new here and currently upgrading my rear bumper. The mechanic said the PDC system is a one time use and will need to be replaced if the bumper is switched? Is this true or is he trying to get me with a lil scammy scam? |
Appreciate
0
|
07-26-2018, 02:23 PM | #182 |
Second Lieutenant
71
Rep 235
Posts |
|
Appreciate
0
|
07-28-2018, 06:40 PM | #183 |
New Member
33
Rep 12
Posts |
|
Appreciate
0
|
07-28-2018, 06:45 PM | #184 |
New Member
33
Rep 12
Posts |
The sensors and the supports are reusable but I'll bet the 3M tape won't
Last edited by johnnieb; 07-28-2018 at 06:50 PM.. |
Appreciate
0
|
08-07-2018, 08:57 AM | #186 |
Enlisted Member
3
Rep 48
Posts |
|
Appreciate
0
|
08-07-2018, 08:59 AM | #187 |
Enlisted Member
3
Rep 48
Posts |
|
Appreciate
0
|
08-09-2018, 01:57 AM | #188 | |
Enlisted Member
8
Rep 45
Posts |
Quote:
For the part numbers please check the post #1 and #3. |
|
Appreciate
0
|
08-09-2018, 07:06 AM | #189 | |
Enlisted Member
3
Rep 48
Posts |
Quote:
|
|
Appreciate
0
|
08-09-2018, 07:44 AM | #190 | ||
Enlisted Member
8
Rep 45
Posts |
Quote:
|
||
Appreciate
0
|
08-09-2018, 09:06 AM | #191 |
First Lieutenant
46
Rep 355
Posts |
*SORTED*
Manged to get the proper wiring diagram from newtis.com and the wiring should be: Pin1 ---> Pin 48 Pin2 ---> Pin 36 Pin3 ---> Pin 53 Pin4 ---> Pin 40 Pin5 ---> Pin 41 Pin6 ---> Pin 52 Hope this helps! Hi, I need some help with regards to the pins in the wiring. I bought the front wiring set that connects to the sensors and built my own wiring from the front bumper to the rear of the car. The installation and coding went well however I have a problem with the pin arrangement. The sensors are not showing the correct location on the screen, for example the right sensor is showing left or middle because the pins are not plugged in the correct location in the REM, this happened because I thought I'd get the correct pin numbers from ISTA/D or from the the official retrofit guide, but unfortunately they are not numbered so I couldn't match my wire colors with the colors mentioned in the retrofit PDF. I'd appreciate very much if anyone could guide me to the wire colors in the X187 socket which is the connector that connects the front bumper wiring loom to the rear wiring loom. My custom wiring pin colors is as follow: Pin1: Orange Pin2: Violet Pin3: Blue Pin4: Pink Pin5: Green Pin6: White I'd need the original pins colors so I can match them with mine and connects them accordingly into my REM. I connected them to the REM as follow: Pin1 ---> Pin 48 "Correct as this is for power" Pin2 ---> Pin 36 "Correct as this is for ground" Pin3 ---> Pin 53 "Wrong" Pin4 ---> Pin 52 "Wrong" Pin5 ---> Pin 40 "Wrong" Pin6 ---> Pin 41 "Wrong" Please have a look at the attached photo as this is the socket I need its original pins arrangement Thanks very much guys!
__________________
Last edited by agad; 08-09-2018 at 12:10 PM.. |
Appreciate
0
|
08-09-2018, 06:46 PM | #192 | |
Enlisted Member
8
Rep 45
Posts |
Quote:
|
|
Appreciate
0
|
08-09-2018, 06:49 PM | #193 |
First Lieutenant
46
Rep 355
Posts |
Yeah this is the one in the retrofit PDF but it doesn't say the pin numbers in X187, however the proper diagram could be found on newtis website, here's the link:
https://www.newtis.info/tisv2/a/en/f...l-pdc/FpUFBsSH Cheers!
__________________
|
Appreciate
0
|
09-04-2018, 01:49 AM | #194 |
New Member
4
Rep 8
Posts |
I am looking for the centre console and found this with the camera icon.
This icon for what and should i buy this or just buy the item with the P only? Many thanks Last edited by Pires751; 09-04-2018 at 03:08 AM.. |
Appreciate
0
|
09-28-2018, 02:24 PM | #196 |
Registered
0
Rep 2
Posts |
I have a 328i Xdrive E90 - 2011 and having a hard time to buy a Front PDC wiring harness for the sensors, does anybody had that issue as well? I called the dealer but I didn't feel secure what the salesman sent to me, did not sound right.
|
Appreciate
0
|
09-29-2018, 04:18 AM | #197 | |
Colonel
594
Rep 2,302
Posts |
Quote:
PDC retrofit cable set has the part number 61120401223. The complete retrofit set has the part number 66200399629. |
|
Appreciate
1
BMWE9020110.00 |
09-29-2018, 05:12 PM | #198 |
Registered
0
Rep 2
Posts |
Thank you for that. The problem is that I bought a car that was rebuilt, it has the back sensors in place but not the front, they painted the bumper and there is no sensors in there, so I need to buy the sensors and the wiring so the mechanic can put it back in order th have both working.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|