08-26-2018, 06:32 AM | #24 |
Second Lieutenant
12
Rep 211
Posts |
solved all right....
https://ibb.co/gx4g2p. coded with all donor VIN FA.. I think the key is in code type. https://ibb.co/gDkM2p Now. I do not have sound. I have alpine.hifi.(retrofit). usb does not work. the navigation asks me to enter usb and code for activation. |
Appreciate
0
|
08-26-2018, 06:36 AM | #25 |
Second Lieutenant
12
Rep 211
Posts |
https://ibb.co/mGaqTU
ATM emulator. I have removed, I have put it pin 13 of nbt evo.sigo without having sound. I do not understand the wire scheme well 13 |
Appreciate
0
|
08-26-2018, 08:08 AM | #26 |
Colonel
594
Rep 2,302
Posts |
The emulator needs to be reinstalled.
Otherwise, you have no navigation and there is always the question for the activation code. Then I would change piece by piece the VO to your VO and code. After each coding check if everything is still working. If something is not working anymore, undo the last change. I would start to change "Entwicklungsbaureihe F036 to F030". Then coding and check. Zeitkriterium i would leave at 0716. After that delete "21W", code and check. And so on... |
Appreciate
0
|
08-26-2018, 03:14 PM | #29 |
Colonel
594
Rep 2,302
Posts |
I think emulator is not working.
And yes, wire 13 could be the reason. Did you not reconnect the emulator like it was before? The wire 13 (Rad_On) is responsible for turning on the amplifier of your hifi-system and like i see on the wiring diagram also for turning on the emulator. |
Appreciate
0
|
08-27-2018, 04:00 PM | #31 |
Colonel
594
Rep 2,302
Posts |
Something i still don't understand.
When you started this thread, you wrote "all worked perfectly". So the emulator was also working perfectly? I just found the installation manual for this emulator. There is written that there are 2 indicators (beside the blue GPS connector). Do the indicators show something? And then i looked again at wire 13 (Rad_On). In the installation manual is written that the Rad_On coming from the emulator is an Output. So it may not be connected with Pin 13 of the HU because Pin 13 is also an output. The Pin 14 from the emulator (white/red) replaces the output from Pin 13 from the HU. Was there a wire connected on Pin 13 (A42*1B HU)? If yes, then this wire has to be connected with Pin 14 of the emulator. |
Appreciate
0
|
08-27-2018, 04:47 PM | #32 |
Second Lieutenant
12
Rep 211
Posts |
everything works less sound.
after solving the black screen, the navigation is not activated.asks me you to enter in usb map and activation code.😪. I have busy pin 13 of evo. I have removed it and connected to pin 14 of ATM Emulator. (It does not work). I have alpine sound retrofit (I'm looking if yes the pin 13 of EVO)as amplifier activator Last edited by jalami; 08-27-2018 at 04:55 PM.. |
Appreciate
0
|
08-27-2018, 05:19 PM | #34 |
Second Lieutenant
12
Rep 211
Posts |
https://ibb.co/mVR8JU
Pin13 nbt evo 2 wires blue (alpine sound wiring) Pin 14 ATM emulador The car's original wiring position 13 is empty. |
Appreciate
0
|
09-01-2018, 04:14 PM | #35 |
Second Lieutenant
12
Rep 211
Posts |
Resolved navigation. after coding. all the fsc were lost.
request fsc of recovery. and problem solved. I continue to struggle with sound. I have been able to locate a small summary of the installation. https://ibb.co/kEqmkK |
Appreciate
0
|
09-08-2018, 01:45 AM | #38 |
Second Lieutenant
12
Rep 211
Posts |
I already have sound. Ufff.😪 (.I need to restart sound amplifier to make it work)
I have another problem.. the hu nbt evo. It is touch, but when I codify, I do not get After coding, i coded FDL..the values from display to touch ,nothing. I code to 0717. If I get it to be tactile but it looks bad. The date of manufacture NBT EVO donor is 2017/08. F36. .my car f30 Last edited by jalami; 09-08-2018 at 11:22 AM.. |
Appreciate
0
|
09-08-2018, 04:48 AM | #39 | |
Colonel
594
Rep 2,302
Posts |
Quote:
But i don't understand the word "tactile". Also when i use google translator it makes no sense. |
|
Appreciate
0
|
09-14-2018, 05:34 AM | #43 |
Second Lieutenant
12
Rep 211
Posts |
Hi all
I think that mine has no solution.. black screen again. I have coded Fdl.; Hmi-id version. ID6. to see if I got a touch screen since my screen is touch I create a new FA again. (same as donor Vin)the 2 errors appear again .. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|