[Jagaer]

Shophopper If BMW changes the 2 x 2 byte pattern to identify each map year & geographical location, the FSC generation routine will need to change as well.

For advanced users (ones who have the byte sequence before the Lookup.xml file is updated), I'd recommend using the console version, which gives you that flexibility.

[reprobcn]

when putting the pen it just tells me to update

but if I do it in windows I do not see the file for the keygen

[deneyer]

Does this work for nbt evo aswell or just nbt?

[Jagaer]

deneyer This trial verson may work for EVO ID4: https://f30.bimmerpost.com/forums/sh....php?t=1529040

If you have an F0 file, it would be helpful for additional testing.

[seattleweather]

Jagaer,
How do we know the VIN Build Date? My car is 2014 model, and i bought end of 2013. Carfax shows 10/13 local dealer did pre-delivery inspection.
Thanks.

[Jagaer]

seattleweather Put the last 7 of your vin into a decoder, such as: https://www.bmwvin.com

In the output, one of the lines will be something like: Prod. Date 2010-08-18 --
That is your build date.

[seattleweather]

Originally Posted by Jagaer

seattleweather Put the last 7 of your vin into a decoder, such as: https://www.bmwvin.com

In the output, one of the lines will be something like: Prod. Date 2010-08-18 --
That is your build date.

thank you very much.

[reprobcn]

is possible file read for vvdi2 ?

[wasimakbar]

Originally Posted by Jagaer

The generator forces you to select each option, which is why it is greyed out.

Enter your VIN. If the VIN isn't valid, it will not let you select a date.
Select a Date, and the Map Type field will become active.
You need to select a map type. Even if "Premium" is displayed, it will not let you select a region until you click on "Premium"
You need to select a region. Even if you want "Arabian Gulf", it will not let you select a Map Year until you click on "Arabian Gulf". etc...

I hope this is a bit more clear.

Hi Jagaer

I've been following all of the above for the FSC code for my car; however, every code it's given seems invalid in my car.
I've selected the correct Map (NBT, Europe NEXT 2018-2), nearest production date (mine is 2014/10/31) and the one before and the one after.
None of the codes that are generated work on my car.

What am I doing wrong???

[NZgeek]

@wasimakbar I don't think that the production date list is exhaustive. It's quite likely that you've got a key that isn't on that list.

I finally got around to hooking up E-SYS to my car in the weekend and pulled out the FSC info. I used the FSC file to generate a code, and then generated codes from around my production date (2012-10-12). None of the date-based codes matched.

If you can, use E-SYS to pull your FSC data and use that to generate a code. Adapters and cables are fairly cheap and easy to find on places like eBay.

[wasimakbar]

Originally Posted by NZgeek

@wasimakbar I don't think that the production date list is exhaustive. It's quite likely that you've got a key that isn't on that list.

I finally got around to hooking up E-SYS to my car in the weekend and pulled out the FSC info. I used the FSC file to generate a code, and then generated codes from around my production date (2012-10-12). None of the date-based codes matched.

If you can, use E-SYS to pull your FSC data and use that to generate a code. Adapters and cables are fairly cheap and easy to find on places like eBay.

I'm just a bit nervous doing anything other than copying data to USB and entering codes, as I usually mess things up and the last time I done something like this it didn't end well.
My car is under warranty so I also don't want to do anything that will get me on the wrong side of the dealers.

Any other way of getting the correct FSC codes for my car?

@Jagaer anything you know of?

[ir655]

Can someone please upload this somewhere where I can download it?

Link in post #1 is now only for premium users :/

[Jagaer]

Links updated

[catello.catullo]

hi

problem for x1 year 2015

FSC code please

vin: vw74173

ROAD MAP EUROPE WEST MOTION 2018-2 USB

Testing keygen invalid code

[reischi82]

Jagaer

I have downloaded v1.9 of your Generator and recently stored F0 from my F31 LCI from 2015 that should have NBT EVO ID4. I want to test if this does work but as I already do have 2018-2 installed into my car I do need 2018-3 but it is not possible to select using drop-down.
Can you please assist me so that I can test?

[atzebmw]

Originally Posted by reischi82

Jagaer

I have downloaded v1.9 of your Generator and recently stored F0 from my F31 LCI from 2015 that should have NBT EVO ID4.

Can you describe how you saved the "F0"-file?
I also tried it but it did not work (also NBT Evo ID4).

[reischi82]

Originally Posted by atzebmw

Can you describe how you saved the "F0"-file?
I also tried it but it did not work (also NBT Evo ID4).

I connected using e-sys and went into expert mode where I used below listed settings:

Diagnostic Adress (hex): 0x63
Application Number (hex/dec): 0xF0
Upgrade Index (hex/dec): 0x01

after selecting Identify I think I remember that there was "HU_NBT2" or similar

using this I was able to read "storeFSC" and save it to my local drive

[atzebmw]

Great.
Thank you very much.
Now i see my mistake.
I was using Application Number 0xDE instead of 0xF0.

[reischi82]

Originally Posted by atzebmw

Great.
Thank you very much.
Now i see my mistake.
I was using Application Number 0xDE instead of 0xF0.

what version of map do you have currently installed? do you have an older one so that you can test if the app does work for creating keys?

[atzebmw]

Originally Posted by reischi82

what version of map do you have currently installed? do you have an older one so that you can test if the app does work for creating keys?

I have the latest version 2018-3 Evo installed.
I was lucky enough to be able to install it without asking for a key.

[reischi82]

Originally Posted by atzebmw

I have the latest version 2018-3 Evo installed.
I was lucky enough to be able to install it without asking for a key.

I think I should also test if I can do so as my update has expired 2 month ago

[atzebmw]

Originally Posted by reischi82

I think I should also test if I can do so as my update has expired 2 month ago

Yes, you can try it.
My car was built in 07/2015.
So I had the free updates until 07/2018.
The 2018-2 map was still in this time period.
But someday I still want to create the code myself.