08-08-2019, 10:30 AM | #1 |
Private
35
Rep 86
Posts |
MSH Stud Conversion + Project Kics Lug Nuts?
Thinking of getting the Motorsport Hardware stud conversion from m14x1.25 -> m14x1.50 so that I can get fit the Project Kics lug nuts on them.
Theoretically this should work right? I'm not missing anything? Also, Would I have problem fitting these lut nuts on a BBS rim? |
08-08-2019, 10:35 AM | #2 |
Colonel
1276
Rep 2,962
Posts |
I've had their conversion kit for like 3 years now so I can use aftermarket nuts with no issues.
__________________
2015 335i Msport/6 JB4/EWG/E30/VRSF DP/ER CP/ VRSF Race Exhaust/ Injen Intake/Verde Axis 19x8.5/9.5 245/35/275/30 Conti Extreme CS/ H&R Sports / Motorsport Hardware Stud Conversion
|
Appreciate
0
|
08-08-2019, 10:53 AM | #3 |
Private
35
Rep 86
Posts |
^^ which conversion kit do you have? and what brand lug nuts are you using?
to bad MSH extended nuts dont have a key otherwise this would be easier. Also from my search, it looks like the paint on the MSH nuts chip/fade really easily. (i know i know, if a thief really wanted to they will take your rims but I'm going to make them really really work for it.) |
Appreciate
0
|
08-08-2019, 01:10 PM | #4 |
Colonel
1276
Rep 2,962
Posts |
It's the Motorsport Hardware conversion, same one you posted above. The lugs I got on Amazon- Wheelmate 33006R because MSH didn't have red at the time. Wheelmate also had a key/lock lug.
__________________
2015 335i Msport/6 JB4/EWG/E30/VRSF DP/ER CP/ VRSF Race Exhaust/ Injen Intake/Verde Axis 19x8.5/9.5 245/35/275/30 Conti Extreme CS/ H&R Sports / Motorsport Hardware Stud Conversion
|
Appreciate
0
|
08-08-2019, 02:17 PM | #6 |
Colonel
1276
Rep 2,962
Posts |
Sorry, they're 75mm
__________________
2015 335i Msport/6 JB4/EWG/E30/VRSF DP/ER CP/ VRSF Race Exhaust/ Injen Intake/Verde Axis 19x8.5/9.5 245/35/275/30 Conti Extreme CS/ H&R Sports / Motorsport Hardware Stud Conversion
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|