OFFICIAL Slammed/Stanced (F30/F32) Thread

Kevin_Trxn · 08-14-2019, 12:04 PM

Quote:

Originally Posted by Ownnij

Quote:

Originally Posted by Kevin_Trxn

Am i worthy yet?

BBS RSII? ballerrrr..... 18 or 19s?

19s x9 in the front x9.5 in the rear

DThr33 · 08-15-2019, 08:14 AM

Splitter has seen better days but tbh nobody expected it to last this long lol

Ownnij · 08-18-2019, 04:46 PM

Quote:

Originally Posted by Kevin_Trxn

19s x9 in the front x9.5 in the rear

just watched TJ Hunt's new upload and i was like hmmm... viet boy kevin and rsII....f30... ok ok i see you playa with the fresh fade LOL

chrisstrann · 08-18-2019, 07:10 PM

Finally got around to dialing in my fitment. Could be better but no point since I'm looking for new wheels soon..

Specs 20x9 +25 20x10.5 +30

KendrickOak · 08-19-2019, 08:15 AM

Complete.

Ownnij · 08-19-2019, 08:21 AM

Quote:

Originally Posted by KendrickOak

Complete.

Bayoptiks/bimmerken = Fire.

KendrickOak · 08-19-2019, 02:38 PM

Quote:

Originally Posted by Ownnij

Quote:

Originally Posted by KendrickOak

Complete.

Bayoptiks/bimmerken = Fire.

Haha thanks bro!

wdeerfield · 08-19-2019, 02:55 PM

Those headlights are wild. Love them! Car looks awesome. How are the forgestars holding up?

KendrickOak · 08-21-2019, 11:27 AM

Quote:

Originally Posted by wdeerfield

Those headlights are wild. Love them! Car looks awesome. How are the forgestars holding up?

holding up well man, smooth ride

chrisstrann · 08-24-2019, 10:31 PM

Call me a mad man. Just slapped these on today.
Rotiform RJC
20x10 +8
20x11 +35

kern417 · 08-25-2019, 10:45 AM

I would expect 10 wide et8 to look much more aggressive up front. Either it's an optical illusion or you worked some magic.

kern417 · 08-26-2019, 06:09 AM

Finally got a chance to meet up with alexng72

alexng72 · 08-26-2019, 05:34 PM

Quote:

Originally Posted by kern417

Finally got a chance to meet up with alexng72

I didn't have my camera with me but this one looks decent with my crappy phone camera

Kefka · 08-26-2019, 11:05 PM

Quote:

Originally Posted by Alpine_F30

Quote:

Originally Posted by Vursce

What lip and wheel and tire specs ? Looks good

Just a $115 MSport lip from eBay, I painted it gloss black.

Wheels/tires are:
19x8.5 +20 on 225/40
19x9.5 +33 on 255/35

I went meatier because I was only lowered ~1in on springs so I hoped they would help fill the remaining wheel gap. Now that I'm on coils I wish I went for 35 and 30 series tires though so I could go lower without rubbing.

More pics?

I have the same specs for rears
19x9.5 et33 planning to mount them into 265/35 tires...but not sure how it will look in F32 n55 car.

Alpine-F80 · 08-27-2019, 10:04 AM

Quote:

Originally Posted by Kefka

More pics?
I have the same specs for rears
19x9.5 et33 planning to mount them into 265/35 tires...but not sure how it will look in F32 n55 car.

Should look good, I may add a little spacer (~5mm), especially after I get rid of these bulky runflats, wish I went with a 10", but was worried +25 could be a problem.

KendrickOak · 08-27-2019, 12:27 PM

Quote:

Originally Posted by kern417

I would expect 10 wide et8 to look much more aggressive up front. Either it's an optical illusion or you worked some magic.

The illusion is slight camber coupled with stretched tires for the win.

GenXer · 08-27-2019, 10:50 PM

Forgive me for being ignorant but how does this make the car ride -- let's say, on rutted and pot hole streets?

wdeerfield · 08-28-2019, 07:57 AM

Quote:

Originally Posted by GenXer

Forgive me for being ignorant but how does this make the car ride -- let's say, on rutted and pot hole streets?

terrible. anyone who says any different doesnt have those roads. rutted pot hole streets even at stock height for me is a pain with 19s

kern417 · 08-28-2019, 09:51 AM

Quote:

Originally Posted by GenXer

Forgive me for being ignorant but how does this make the car ride -- let's say, on rutted and pot hole streets?

It's stiff. You can run adjustable suspension on full soft dampening to reduce the effect, especially KW Street Comfort coils tend to be on the soft side. But then you risk bottoming out and rubbing if you're lowered significantly.

Basically slow down and avoid the holes or drive faster so you fly over them

My only real enemy is highway seams because there's no way to slow down for the impact.

Waltabeast · 08-28-2019, 11:57 PM

Quote:

Originally Posted by kern417

It's stiff. You can run adjustable suspension on full soft dampening to reduce the effect, especially KW Street Comfort coils tend to be on the soft side. But then you risk bottoming out and rubbing if you're lowered significantly.

Basically slow down and avoid the holes or drive faster so you fly over them

My only real enemy is highway seams because there's no way to slow down for the impact.

Story of my life. I completely regret buying KW SC. Been like 3 months, going to just save up and get bags next year lol.

DThr33 · 08-30-2019, 08:12 AM

Couple pics from a shoot with candy showroom this past weekend. More on their IG @candyshowroom
Switched up from 12kg to 18kg springs in the rear, might need to go stiffer haha

chrisstrann · 08-31-2019, 10:50 AM

Quote:

Originally Posted by kern417

I would expect 10 wide et8 to look much more aggressive up front. Either it's an optical illusion or you worked some magic.

Quote:

Originally Posted by kern417

I would expect 10 wide et8 to look much more aggressive up front. Either it's an optical illusion or you worked some magic.

Optical illusion with maxed out camber 🤣

08-15-2019, 08:14 AM	#1586
DThr33 Captain 634 Rep 964 Posts Drives: F80 M3 Join Date: May 2016 Location: London iTrader: (0)	Splitter has seen better days but tbh nobody expected it to last this long lol
	Appreciate 2 kern4174445.00 KendrickOak358.50 Quote

08-18-2019, 07:10 PM	#1588
chrisstrann Stancenation Build 83 Rep 114 Posts Drives: F06 M6 Join Date: Jan 2018 Location: Los Angeles iTrader: (0)	Finally got around to dialing in my fitment. Could be better but no point since I'm looking for new wheels soon.. Specs 20x9 +25 20x10.5 +30 Attached Images
	Appreciate 2 kern4174445.00 DThr33634.00 Quote

08-19-2019, 08:15 AM	#1589
KendrickOak KendrickOak 359 Rep 201 Posts Drives: 17' F32 M Sport Join Date: Nov 2017 Location: Texas iTrader: (0)	Complete. Attached Images
	Appreciate 3 kern4174445.00 MISY2K11.50 CrimsonXV26.50 Quote

08-19-2019, 02:55 PM	#1592
wdeerfield A family of bimmers 2745 Rep 7,741 Posts Drives: '18 G01 X3M40i Join Date: Jan 2012 Location: Clifton Park, NY iTrader: (0)	Those headlights are wild. Love them! Car looks awesome. How are the forgestars holding up? __________________ 2018 PB/Black G01 X3M40i \| 699M \| ZDA \| ZPP \| ZPX \| Maxton front lip \| X3M vents \| 15mm Spacers \| Diamond G20 style grills
	Appreciate 1 KendrickOak358.50 Quote

08-24-2019, 10:31 PM	#1594
chrisstrann Stancenation Build 83 Rep 114 Posts Drives: F06 M6 Join Date: Jan 2018 Location: Los Angeles iTrader: (0)	Call me a mad man. Just slapped these on today. Rotiform RJC 20x10 +8 20x11 +35 Attached Images
	Appreciate 5 F30_SixSpeed1170.50 KendrickOak358.50 DThr33634.00 Alpine-F80200.50 BMW BRAD202.50 Quote

08-27-2019, 10:50 PM	#1601
GenXer Major 1363 Rep 1,031 Posts Drives: Like a bat out of hell. Join Date: Apr 2019 Location: here and there iTrader: (0) Garage List 2017 Chevrolet Volt [0.00] 2020 Chevrolet Tahoe [0.00]	Forgive me for being ignorant but how does this make the car ride -- let's say, on rutted and pot hole streets?
	Appreciate 0 Quote

08-30-2019, 08:12 AM	#1605
DThr33 Captain 634 Rep 964 Posts Drives: F80 M3 Join Date: May 2016 Location: London iTrader: (0)	Couple pics from a shoot with candy showroom this past weekend. More on their IG @candyshowroom Switched up from 12kg to 18kg springs in the rear, might need to go stiffer haha
	Appreciate 1 chrisstrann83.00 Quote