Andream MMI Box - Wireless CarPlay & Android Auto

cossie1 · 05-03-2020, 01:12 PM

Quote:

Originally Posted by Racerboat

HI everyone,

@Cossie1, can you say me where did you find the lastest update of the CUST and MCU for Andream, because the first page of this forum still not update, so I'm little lost now lol.

It's too complicated to read 80 pages of forum to know what is working or not on the andream unit ˆˆ

thanks in advance for your help ;-)

racerboat

The latest ones they have given out are 2.0.2.7.gpe.b and MCU 19.12.12

But you can use the carlinkit 20.1.4 MCU that is posted on the 1st page and it will work fine.

Still no reply from Andream with the actual latest updates.

Racerboat · 05-03-2020, 01:27 PM

Quote:

Originally Posted by cossie1

The latest ones they have given out are 2.0.2.7.gpe.b and MCU 19.12.12

But you can use the carlinkit 20.1.4 MCU that is posted on the 1st page and it will work fine.

Still no reply from Andream with the actual latest updates.

OK so need to use the mcu 20.4.2.14) and 2.1.0.1.lc.b software ?

cossie1 · 05-03-2020, 01:29 PM

Quote:

Originally Posted by Racerboat

OK so need to use the mcu 20.4.2.14) and 2.1.0.1.lc.b software ?

If that is what is on your unit, then it's newer than anything Andream have released to us as an update.

Racerboat · 05-03-2020, 01:32 PM

Quote:

Originally Posted by cossie1

If that is what is on your unit, then it's newer than anything Andream have released to us as an update.

Oups sorry not at all ˆ I was asking if this updates are necessary ?

cossie1 · 05-03-2020, 01:34 PM

Quote:

Originally Posted by Racerboat

Oups sorry not at all ˆ I was asking if this updates are necessary ?

We don't have them yet, so no idea.

2.0.2.7.gpe.b works fine with 20.1.4 though.

Racerboat · 05-03-2020, 01:40 PM

Quote:

Originally Posted by cossie1

We don't have them yet, so no idea.

2.0.2.7.gpe.b works fine with 20.1.4 though.

OK perfect thanks a lot

TA020 · 05-03-2020, 01:41 PM

Quote:

Originally Posted by Unspec

Jacks on the quad lock? I'm pretty sure the normal quad lock doesn't have jacks, post a picture. Sounds like you're confusing the wiring.

Yea there is a male and female jack on the quadlock that andream sended with the carplay box

Unspec · 05-03-2020, 02:03 PM

Quote:

Originally Posted by TA020

Yea there is a male and female jack on the quadlock that andream sended with the carplay box

Like as in a RCA jack?

TA020 · 05-03-2020, 02:08 PM

Quote:

Originally Posted by Unspec

Like as in a RCA jack?

No its like a female 3.5jack ande a male 3.5 jack

muniz_ri · 05-03-2020, 02:20 PM

Quote:

Originally Posted by TA020

No its like a female 3.5jack ande a male 3.5 jack

Here is a diagram of the AV Harness with descriptions. If you received something different from the seller for an NBT system you want to contact the seller:

TA020 · 05-03-2020, 03:09 PM

Quote:

Originally Posted by muniz_ri

Here is a diagram of the AV Harness with descriptions. If you received something different from the seller for an NBT system you want to contact the seller:

Thanks for info but its not de av harness its on the quadlock harness the male e.5jack and female 3.5jack

Unspec · 05-03-2020, 03:33 PM

Quote:

Originally Posted by TA020

Thanks for info but its not de av harness its on the quadlock harness the male e.5jack and female 3.5jack

The current units don't come with anything of the sort that you're describing. The CAN cable that contains the quadlock ONLY has a male and female quad lock. No 3.5 jacks. Post the link where you bought the unit, I have a feeling you are not using the device that this thread is for.

Edit:

It sounds like you have either the Joyeauto or Unique-AD version. This thread is not for those devices. Seek help in their respective threads:

Joyeauto:
https://f30.bimmerpost.com/forums/sh....php?t=1622013

Unique-AD:
https://f30.bimmerpost.com/forums/sh....php?t=1597999

cossie1 · 05-03-2020, 03:42 PM

Quote:

Originally Posted by Unspec

The current units don't come with anything of the sort that you're describing. The CAN cable that contains the quadlock ONLY has a male and female quad lock. No 3.5 jacks. Post the link where you bought the unit, I have a feeling you are not using the device that this thread is for.

Edit:

It sounds like you have either the Joyeauto or Unique-AD version. This thread is not for those devices. Seek help in their respective threads:

Joyeauto:
https://f30.bimmerpost.com/forums/sh....php?t=1622013

Unique-AD:
https://f30.bimmerpost.com/forums/sh....php?t=1597999

I think the latest units come with an additional aux cable so it will work with CIC-High and NBT

Unspec · 05-03-2020, 04:26 PM

Quote:

Originally Posted by cossie1

I think the latest units come with an additional aux cable so it will work with CIC-High and NBT

Why would NBT need an aux cable?

cossie1 · 05-03-2020, 04:29 PM

Quote:

Originally Posted by Unspec

Why would NBT need an aux cable?

It doesn't but I think CIC-High does.

TA020 · 05-03-2020, 05:14 PM

Quote:

Originally Posted by Unspec

The current units don't come with anything of the sort that you're describing. The CAN cable that contains the quadlock ONLY has a male and female quad lock. No 3.5 jacks. Post the link where you bought the unit, I have a feeling you are not using the device that this thread is for.

Edit:

It sounds like you have either the Joyeauto or Unique-AD version. This thread is not for those devices. Seek help in their respective threads:

Joyeauto:
https://f30.bimmerpost.com/forums/sh....php?t=1622013

Unique-AD:
https://f30.bimmerpost.com/forums/sh....php?t=1597999

I orderd it from andream.eu so its wierd i will look at it in the morning and post after.

Len_Beach · 05-03-2020, 05:24 PM

My unit also came with a 3.5mm male which from memory ran from a loom that intercepted the stock microphone. I didn't need to use this.

There's also a 3.5mm female as part of the CANpower loom, again I didn't need to use this.

TA020 · 05-03-2020, 08:33 PM

Quote:

Originally Posted by Len_Beach

My unit also came with a 3.5mm male which from memory ran from a loom that intercepted the stock microphone. I didn't need to use this.

There's also a 3.5mm female as part of the CANpower loom, again I didn't need to use this.

Did you also got a spare male jack with wierd connaction cable?

muniz_ri · 05-03-2020, 08:59 PM

Quote:

Originally Posted by TA020

Did you also got a spare male jack with wierd connaction cable?

That looks like an external mic harness.

Len_Beach · 05-04-2020, 02:56 AM

Quote:

Originally Posted by TA020

Quote:

Originally Posted by Len_Beach

My unit also came with a 3.5mm male which from memory ran from a loom that intercepted the stock microphone. I didn't need to use this.

There's also a 3.5mm female as part of the CANpower loom, again I didn't need to use this.

Did you also got a spare male jack with wierd connaction cable?

Yep, mine had 3 connectors. The 3.5mm male and a male and female that sat inline of the stock microphone. I didn't need to use this one.

There were also the female 3.5mm and 90 degree 3.5mm thinking back which again I didn't need to use.

I watched a video of an Android headunit install, he plugged the 90 degree 3.5mm into the Aux socket in the centre console which gave sound as his quad lock didn't work for some reason.

Tina* · 05-04-2020, 03:55 AM

Quote:

Originally Posted by cossie1

Has anyone managed to get AirPlay to work ?

1). Click 'Airplay' icon first. Then a dialog box will pop up prompting to connect to wifi.
2). Turn on wifi on your iPhone. Search the wifi signal of the Carplay on your iPhone, then connect.

Tina* · 05-04-2020, 04:01 AM

Quote:

Originally Posted by drejcof

Hello.
I also have Andream MMI box with one big problem. There is no sound from carplay system. Everything other works, except audio. Any idea, what could be wrong?

Hello,do you transfer the optic fiber?

05-03-2020, 05:24 PM	#1799
Len_Beach Major 186 Rep 1,247 Posts Drives: 435d Join Date: Jun 2011 Location: UK iTrader: (1)	My unit also came with a 3.5mm male which from memory ran from a loom that intercepted the stock microphone. I didn't need to use this. There's also a 3.5mm female as part of the CANpower loom, again I didn't need to use this.
	Appreciate 0 Quote