OFFICIAL Slammed/Stanced (F30/F32) Thread

kern417 · 07-31-2020, 07:47 AM

Quote:

Originally Posted by sviswasam

Fitment finally dialed in. Apex arc-8s with KW V2

lovely

F30Hayden · 08-01-2020, 08:22 PM

Tried to look everywhere I can and could only find 2 people running this wide in front online. Does anyone know what offset or experience to clear the strut? Looking to get aggressive flush fitment static and want the concavity that the 10" wide offers. Any help would be much appreciated!

cheewei23 · 08-03-2020, 11:44 AM

Quote:

Originally Posted by sviswasam

Fitment finally dialed in. Apex arc-8s with KW V2

Looks great! What's the specs on those wheels/tires? Thinking about the same setup for my xdrive. Thanks!

jdwrght55 · 08-04-2020, 10:41 PM

Quote:

Originally Posted by F30Hayden

Tried to look everywhere I can and could only find 2 people running this wide in front online. Does anyone know what offset or experience to clear the strut? Looking to get aggressive flush fitment static and want the concavity that the 10" wide offers. Any help would be much appreciated!

With enough camber and stretch I’m sure it can be done, but it’s going to be tough running 10” wide in the front, especially if you want a lot of concavity. What suspension, ride height and wheel diameter will you be running? Also, if you just want concavity why not go with 8.5” or 9” and get a really low/aggressive offset?

blumagic · 08-05-2020, 07:41 AM

Quote:

Originally Posted by F30Hayden

Tried to look everywhere I can and could only find 2 people running this wide in front online. Does anyone know what offset or experience to clear the strut? Looking to get aggressive flush fitment static and want the concavity that the 10" wide offers. Any help would be much appreciated!

From page 21 of this thread, 19x10+25 in front

Quote:

Originally Posted by Camnyc

kern417 · 08-06-2020, 07:26 AM

himynameskevin · 08-07-2020, 01:40 PM

Quote:

Originally Posted by F30Hayden

Tried to look everywhere I can and could only find 2 people running this wide in front online. Does anyone know what offset or experience to clear the strut? Looking to get aggressive flush fitment static and want the concavity that the 10" wide offers. Any help would be much appreciated!

Depending on your tire and suspension (air bags vs KW vs BC vs stock, etc) will all impact inner clearance. Inner barrel to strut, I'd say 10 +25 is as conservative as you will want to be with offset. That clearances will come down to your tire size and how the bead/sidewall sits too since you are splitting wires at that point

BURBLEBUTT · 08-10-2020, 12:24 PM

This may be an off question but I have an f32 with the stock m performance 18" rims with 255s in the rear... what is the widest tire I can fit on that rim and what offset can I use to push the tires outside the rear well?

Sidewinderpb · 08-10-2020, 01:35 PM

Quote:

Originally Posted by sviswasam

Fitment finally dialed in. Apex arc-8s with KW V2

Hit us with those wheel specs.

sviswasam · 08-10-2020, 04:09 PM

Quote:

Originally Posted by Sidewinderpb

Quote:

Originally Posted by sviswasam

Fitment finally dialed in. Apex arc-8s with KW V2

Hit us with those wheel specs.

19x9 +28 F 19x9.5 +22 R. 225/40 255/35 Michelin Pilot Sport AS3+. No spacers and slight rear camber

Sidewinderpb · 08-11-2020, 08:44 AM

Quote:

Originally Posted by sviswasam

19x9 +28 F 19x9.5 +22 R. 225/40 255/35 Michelin Pilot Sport AS3+. No spacers and slight rear camber

Thanks man. Haven't seen too many aggressive/flush xDrives on this platform. Car looks great. Post some more pics if you have a chance

sviswasam · 08-11-2020, 08:37 PM

Quote:

Originally Posted by Sidewinderpb

Quote:

Originally Posted by sviswasam

19x9 +28 F 19x9.5 +22 R. 225/40 255/35 Michelin Pilot Sport AS3+. No spacers and slight rear camber

Thanks man. Haven't seen too many aggressive/flush xDrives on this platform. Car looks great. Post some more pics if you have a chance

Thanks man. Definitely took a few iterations of wheels/tires and suspension to get it right.

Canadared · 08-12-2020, 04:30 PM

Just got done so it's a quick pic. lowered on solo werks 19x9, 19x10 +35 Work Varianza T1S. back needs to settle and probably go with 10mm spacers in the front

Johnny250 · 09-01-2020, 11:29 PM

Gloss Black 513M Square Setup
18x9 +29
255/40/18 Falken RT615k+

Lowered on KW v1

FastF30 · 09-02-2020, 12:00 AM

Quote:

Originally Posted by Johnny250

Gloss Black 513M Square Setup
18x9 +29
255/40/18 Falken RT615k+

Lowered on KW v1

Thank you so much... that's exactly the setup I want... great picture... do you have a side picture? also like your front lip.. where did you get it?

Johnny250 · 09-02-2020, 11:12 AM

Quote:

Originally Posted by FastF30

Thank you so much... that's exactly the setup I want... great picture... do you have a side picture? also like your front lip.. where did you get it?

Front lip is a 3d design lip, you can get it from IND.

itsrichierich · 09-02-2020, 11:19 AM

Quote:

Originally Posted by Johnny250

Gloss Black 513M Square Setup
18x9 +29
255/40/18 Falken RT615k+

Lowered on KW v1

Sheeeesh! I was trying to find those wheels in 18x9 but no one was selling them in sets of 2s.

aps · 09-02-2020, 11:29 AM

Quote:

Originally Posted by Johnny250

Gloss Black 513M Square Setup
18x9 +29
255/40/18 Falken RT615k+

Lowered on KW v1

Bro.... i saw you post this set up on IG....too much heat!!! Your fitment is always on point!

robertf3o · 09-28-2020, 01:18 AM

[IMG][/IMG]

Finally decided to post my car on here.
Wheels are 18x9.5 rear and 18x8.5 fronts.
Tires are 245x40 read and 235x40 fronts.
On Bc racing coilovers.

Canadared · 09-29-2020, 06:47 PM

Another

kern417 · 10-08-2020, 01:31 PM

visionaut · 10-09-2020, 07:27 PM

...my new alternate reality...

Custom drop featuring iMagine EDC V2 for F36 / Copypasta Sport++ Suspensionwerks / NegativeVert poly pixels

08-01-2020, 08:22 PM	#1762
F30Hayden New Member 2 Rep 11 Posts Drives: 2014 435i Join Date: Aug 2020 Location: Washington iTrader: (0)	Anyone running 20x10 front? Tried to look everywhere I can and could only find 2 people running this wide in front online. Does anyone know what offset or experience to clear the strut? Looking to get aggressive flush fitment static and want the concavity that the 10" wide offers. Any help would be much appreciated!
	Appreciate 0 Quote

08-10-2020, 12:24 PM	#1768
BURBLEBUTT New Member 0 Rep 8 Posts Drives: 2014 435i Join Date: Jul 2020 Location: CA iTrader: (0)	This may be an off question but I have an f32 with the stock m performance 18" rims with 255s in the rear... what is the widest tire I can fit on that rim and what offset can I use to push the tires outside the rear well?
	Appreciate 0 Quote

08-12-2020, 04:30 PM	#1773
Canadared Private 54 Rep 59 Posts Drives: 2012 BMW 335i F30 Join Date: Sep 2019 Location: London iTrader: (0)	Just got done so it's a quick pic. lowered on solo werks 19x9, 19x10 +35 Work Varianza T1S. back needs to settle and probably go with 10mm spacers in the front Attached Images
	Appreciate 3 kern4174446.50 wdeerfield2745.00 philip_pino9.00 Quote

09-01-2020, 11:29 PM	#1774
Johnny250 Colonel 1044 Rep 2,152 Posts Drives: 328d Wagon Join Date: Apr 2012 Location: Los Angeles iTrader: (38)	Gloss Black 513M Square Setup 18x9 +29 255/40/18 Falken RT615k+ Lowered on KW v1 __________________ EBII F80 M3 Build Here EBII F31 328d Build Here
	Appreciate 7 Bt130915.00 kern4174446.50 aps335.50 Alpine-F80200.50 sviswasam37.50 BMW BRAD202.50 obzen188.00 Quote

09-28-2020, 01:18 AM	#1779
robertf3o New Member 3 Rep 5 Posts Drives: bmw f30 Join Date: Sep 2020 Location: california iTrader: (0)	[IMG][/IMG] Finally decided to post my car on here. Wheels are 18x9.5 rear and 18x8.5 fronts. Tires are 245x40 read and 235x40 fronts. On Bc racing coilovers. Attached Images
	Appreciate 0 Quote

09-29-2020, 06:47 PM	#1780
Canadared Private 54 Rep 59 Posts Drives: 2012 BMW 335i F30 Join Date: Sep 2019 Location: London iTrader: (0)	Another Attached Images
	Appreciate 1 philip_pino9.00 Quote

10-09-2020, 07:27 PM	#1782
visionaut Captain 1306 Rep 881 Posts Drives: 2016 435iX GC & 1976 2002 Join Date: Aug 2018 Location: Mile High City, CO iTrader: (0)	...my new alternate reality... Custom drop featuring iMagine EDC V2 for F36 / Copypasta Sport++ Suspensionwerks / NegativeVert poly pixels Attached Images
	Appreciate 4 Bt130915.00 jcarv2033.00 Expert@ApexWheels3521.50 bellguy127.00 Quote