[JustWatch]

First session with ESYS, went through the following steps:
- hooked up computer to cable, then connected cable to car (engine running)
- started ESYS (expert mode, coding)
- clicked Connect button, connection via VIN (vin displayed is correct)
- Read -> FA activated
- Read (ECU)
So far, so good.

But then I selected the CAFD from FEM_BODY with the green button, right mouse click and selected 'read coding data'. That's where I get the following error
Code:
Transaktions-Report: Aktion: Codierdaten lesen


CAFD_00000794_015_048_005 Fehler:
CPS read from ECU "ECUId:FEM_BODY_0x40" failed! [C070]
openECUConnection for link FEM_BODY_40_ETHERNET failed
with error MCDError Severity: 2051, Error Code: 49184,
Description: Object with name not found, Vendor Code: 3,
Vendor Description: provided name FEM_BODY_40_ETHERNET
doesn't map to an item [1694]

[atzebmw]

Have you also chosen the right model series before connecting?
E.g. F020 for F30/F31/F32...