[mkereti4]

Originally Posted by shawnsheridan

Shawn, i know is not the real topic, but i cannot send PM, please help, did you ever code G30 (F90) LCI tail light retrofit? welcome light does not work good, outer lamps does not lit up. markokeretic@gmail.com... pleasee help me

[shawnsheridan]

Originally Posted by mkereti4

Shawn, i know is not the real topic, but i cannot send PM, please help, did you ever code G30 (F90) LCI tail light retrofit? welcome light does not work good, outer lamps does not lit up. markokeretic@gmail.com... pleasee help me

I just replied to PM from markec-vz for this exact thing. I assume this is same car.

[RFN]

Hello everyone,

This is my first post ever in this great forum. I have been using bimmerpost.com for a while now, only looking around for guidance.

Now I need help on how to start coding my F31 2016.
My plan is to do the change from 6,5" to the 8.8" display screen. I have studied everything regarding which screen is compatible with my model car. That part is done. ENET cable ordered. I think i have all the knowledge on how to do the hardware part. In the guide for change from 6,5" to 8,8" everyone is talking about how easy the coding is
BUT, I need help with the coding. I have searched and searched the forum for guidance but I can’t seem to find a suitable guide. I have tried to download the software but no luck with the installation.

Can any one please help on how to get started.

Thank you.

[VitorioUA]

Hi
When reverse gear is engaged, the exterior lights on the handles light up.
Can this be done on the F25?
like this option:
FRM | 3070 LciMaster | OVT_BEI_RUECKFAHRLICHT = aktiv
but I can't find her

[shawnsheridan]

Originally Posted by RFN

Hello everyone,

This is my first post ever in this great forum. I have been using bimmerpost.com for a while now, only looking around for guidance.

Now I need help on how to start coding my F31 2016.
My plan is to do the change from 6,5" to the 8.8" display screen. I have studied everything regarding which screen is compatible with my model car. That part is done. ENET cable ordered. I think i have all the knowledge on how to do the hardware part. In the guide for change from 6,5" to 8,8" everyone is talking about how easy the coding is
BUT, I need help with the coding. I have searched and searched the forum for guidance but I can’t seem to find a suitable guide. I have tried to download the software but no luck with the installation.

Can any one please help on how to get started.

Thank you.

PM sent.

[shawnsheridan]

Originally Posted by VitorioUA

Hi
When reverse gear is engaged, the exterior lights on the handles light up.
Can this be done on the F25?
like this option:
FRM | 3070 LciMaster | OVT_BEI_RUECKFAHRLICHT = aktiv
but I can't find her

No, not possible for F25.

[VitorioUA]

Originally Posted by shawnsheridan

No, not possible for F25.

ok, thanks

anyone got the latest cheat sheet for f25?

[iAlexander]

shawnsheridan Please send E-Sys and PSDzData link when you get a chance. Thanks!

[shawnsheridan]

Originally Posted by iAlexander

shawnsheridan Please send E-Sys and PSDzData link when you get a chance. Thanks!

PM sent.

[Cone696969]

shawnsheridan Can you send me the esys and launcher. I want to code the led dome light on my f30 2018 thnks

[radicalrev]

Is it possible to code Welcome Lights with only Rear DRL on + front DRL on but low beam off

The current set up i have is the rear DRL on + Front low beam on + DRL on, and the light switch position must be on Auto to work.

[shawnsheridan]

Originally Posted by Cone696969

shawnsheridan Can you send me the esys and launcher. I want to code the led dome light on my f30 2018 thnks

PM sent.

[Siki78]

Hello,

who can please send me a working link to E-sys Launcher Pro 3.x (also by PN). i want to update my car but after that I will not be able to code again with launcher 2.8.
Thanks in advance

[shawnsheridan]

Originally Posted by Siki78

Hello,

who can please send me a working link to E-sys Launcher Pro 3.x (also by PN). i want to update my car but after that I will not be able to code again with launcher 2.8.
Thanks in advance

No one can. Launcher Pro 3.x requires Online Activation by Developer, whi is currently MIA. Options are hacked eBay version or E-SysX:

https://esysx.com/product/esysx-32-64-bit/

[chemicalx]

Newbie here and i set up a separate thread, but i am posting here in case anyone has seen this issue...

I've owned BMWs for quite a while and have lurked here, but signed up needing help. I have a 2014 328i F30. Recently, my radio control/head unit went on the fritz, leaving me with a BMW logo that would go black and reboot to a BMW logo. In reading, i came to figure out the issue and brought the car to the stealership, hoping it might be something else. It wasn't. They quoted me $2300-, which isn't happening. My local BMW repair guy said he'd do it if i got him the part. So, i found the part to be 65129270374, bought it off of Ebay and he installed it today. I had heard of coding and he said he did code it, but it seems he didn't. The radio works, but Bluetooth doesn't seem to work and Satellite radio is not an option. The guys at Bimmertech told me i need to 2 separate things done;

1) Radio needs to be coded to the car - $299
2) Satellite option needs to be coded as well - $299

Is this an accurate determination of where i might be right now? If so, is there a spot here where people can assist?

Any help is greatly appreciated.

[Iceman777]

I got a suggestion. Go to a dealer and reqeust a software update. This should also fix the pfoblem i think.

[issabimmer]

Hi Shawn, please share the latest esys and launcher with me. Thanks for your contributions to this forum!

[shawnsheridan]

Originally Posted by issabimmer

Hi Shawn, please share the latest esys and launcher with me. Thanks for your contributions to this forum!

PM sent.

[Freedom24]

Hello everyone!
I have a problem with E-Sys. When I start the program through the launcher I get a message "Loading E-Sys Launcher P SdZ AP Module Failed! Error: C:ProgramData\TokenMaster\E-Sys Launcher PRO\Bin\P SdZAPI.dll: Can`t find dependent libraries", then it starts and connects normally to the car. The program reads Coding Data, but when I try to edit FDL or activate FA the process goes on indefinitely and I forced to stop E-Sis. The car is F30 2015 LCI, launcher - 2.8.2 Build 162b, E-Sys - 3.27.1 RC b44813, PSdZData - v.4.25.40 Lite.
In saved SVT file: "ecuDetailInfo ISO14229Enabled="true" FlashEnabled="true" CodingEnabled="false" NGSCEnabled="false" SecurityEnabled="false" SWTEnabled="false" ActiveNotifyEnabled="true"
Does anyone have any idea what I'm doing wrong?

[shawnsheridan]

Originally Posted by Freedom24

Hello everyone!
I have a problem with E-Sys. When I start the program through the launcher I get a message "Loading E-Sys Launcher P SdZ AP Module Failed! Error: C:ProgramData\TokenMaster\E-Sys Launcher PRO\Bin\P SdZAPI.dll: Can`t find dependent libraries", then it starts and connects normally to the car. The program reads Coding Data, but when I try to edit FDL or activate FA the process goes on indefinitely and I forced to stop E-Sis. The car is F30 2015 LCI, launcher - 2.8.2 Build 162b, E-Sys - 3.27.1 RC b44813, PSdZData - v.4.25.40 Lite.
In saved SVT file: "ecuDetailInfo ISO14229Enabled="true" FlashEnabled="true" CodingEnabled="false" NGSCEnabled="false" SecurityEnabled="false" SWTEnabled="false" ActiveNotifyEnabled="true"
Does anyone have any idea what I'm doing wrong?

Install this:

Visual C++ Redistributable Packages for Visual Studio 2013
https://mega.nz/file/MoZEXQyZ#456-g1...mb7_RLIGdzYCNc

[macman_lahti]

Hello Shawn!

Can you share latest esys links for me..? Thank you!

[shawnsheridan]

Originally Posted by macman_lahti

Hello Shawn!

Can you share latest esys links for me..? Thank you!

PM sent.