[MSCD]

Originally Posted by BWbimmer

It's a shame since you can get them OEM and then they really fit:

Or just go all in on Carbon Fiber!

[chowser51]

Originally Posted by learntocode

other than removing the rear fog button, did you need to solder LED light to your US spec headlight switch?

I just swapped the whole module. It was quick and easy. I tried the button first but there was no led on the US switch.

[learntocode]

Originally Posted by LongRuf

Where did you find that part? Easy to install?

DIY: easy to remove & install. Use very thin pick/flat head to remove the shift plate. Start from top right corner. I added like 4-5 layers of masking tape between the gaps, so I would not scratch/dent up the handle knob.

Here's a YT video for reference:

The shift plate part was about $12 on alibaba. Shipping was really slow, but it arrived.

I don't think BMW sells this face plate individually, need to buy as whole set, that costs around $250!

[learntocode]

Originally Posted by BWbimmer

It's a shame since you can get them OEM and then they really fit[/IMG]

My interior trim pieces are the aluminum dark carbon with pearl gloss chrome highlight, getting OEM carbon fiber is nice, however, I was only after aesthetic of the face plate. Small modification on a budget and it compliments the M sport package.

[Onizukachan]

Originally Posted by chowser51

It's been awhile but I think my euro-spec control module was like $50 shipped.

Just so I could have my rear fog light button lit up.

I modified the oem switch and used a sticker for about a week and said screw it and ordered the euro switch. lol


you can't just swap the buttons. the light is on the board itself.

I did the same. Think mine was like $29 bucks shipped from Europe.

[BWbimmer]

Originally Posted by learntocode

DIY: easy to remove & install. Use very thin pick/flat head to remove the shift plate. Start from top right corner. I added like 4-5 layers of masking tape between the gaps, so I would not scratch/dent up the handle knob.


The shift plate part was about $12 on alibaba. Shipping was really slow, but it arrived.

I don't think BMW sells this face plate individually, need to buy as whole set, that costs around $250!

Yes, you are right they don't sell seperatly. Nevertheless, we can get the Ceramic kit here for ~160 €, just in case you were intrested.

[Alvin Mpower]

This trunk guard came in today, put it on and it honestly looks really good in person.

[MSCD]

Originally Posted by horrizenashisland

This trunk guard came in today, put it on and it honestly looks really good in person.

Does that help with the backup camera? Mine reflects off the white bumper...

[Alvin Mpower]

Originally Posted by MSCD

Does that help with the backup camera? Mine reflects off the white bumper...

omg, you are right, I forgot about that. I have a masking tape over some portion of my backup camera to block the white. I will give it a try.


Edit: Holy crap, yes, it gets rid of the white reflection, I was able to see in the dark after I removed the stupid masking tape.

[erickonphoenix]

Finally got F31 safety cards printed. $25 a piece but they're printed on a heavy acrylic stock so they should hold up. Threw in a couple of issues of Houstonia magazine and a couple of airsick bags to close the deal. Big thanks to BWbimmer for dialing in the translation.

Now I just need to install oxygen mask drops and my gag will be complete.

[MSCD]

Originally Posted by horrizenashisland

omg, you are right, I forgot about that. I have a masking tape over some portion of my backup camera to block the white. I will give it a try.


Edit: Holy crap, yes, it gets rid of the white reflection, I was able to see in the dark after I removed the stupid masking tape.

Good to know, thank you!!

I would prefer a plain black one, can't seem to find it!

[BEM-S4]

Originally Posted by MSCD

Good to know, thank you!!

I would prefer a plain black one, can't seem to find it!

I can dig it up in my email but there's someplace close by - highly recommended - that was going to do a clear film for me on that spot. I never got around to it. No reason they couldn't do flat black PPF I assume.

[MSCD]

Originally Posted by BEM-S4

I can dig it up in my email but there's someplace close by - highly recommended - that was going to do a clear film for me on that spot. I never got around to it. No reason they couldn't do flat black PPF I assume.

Cool, thanks. I'm mostly ok, but my drive has a curve and I always back out of it! That my biggest issue.

[im_an_alien]

Originally Posted by MSCD

Cool, thanks. I'm mostly ok, but my drive has a curve and I always back out of it! That my biggest issue.

For those with white cars you can also code the license plate lights to dim or turn off when reverse is engaged to avoid the white wash on the camera...

[vmaniqui]

Originally Posted by BWbimmer

It's a shame since you can get them OEM and then they really fit:

thinking of doing this also but I have an anthracite wood trims. do you think it will clash or it's OK to put gear shifter/plate carbon fiber with anthracite wood trim? I don't want to change the other trims, just the gear shifter/plate.

thanks,
vic

[BWbimmer]

Originally Posted by vmaniqui

thinking of doing this also but I have an anthracite wood trims. do you think it will clash or it's OK to put gear shifter/plate carbon fiber with anthracite wood trim? I don't want to change the other trims, just the gear shifter/plate.

thanks,
vic

Why don't you take a picture of the interiour of your can and photoshop the 2 shifter options?
I can just say with the Ceramic option being so reflective, it's nicely blending in with my carbon parts. But it's all personal taste

[Alvin Mpower]

Originally Posted by im_an_alien

For those with white cars you can also code the license plate lights to dim or turn off when reverse is engaged to avoid the white wash on the camera...

Is it in Bimmercode? If it is can you provide some detail on which module it is? Thanks.

[im_an_alien]

Originally Posted by horrizenashisland

Is it in Bimmercode? If it is can you provide some detail on which module it is? Thanks.

Esys. I'll look at my notes and let you know

[Alvin Mpower]

Got the M performance shifter and hand brake, looks and feel so much better than the M sport shifter.

[BWbimmer]

Originally Posted by horrizenashisland

Got the M performance shifter and hand brake, looks and feel so much better than the M sport shifter.

Now the matching armrest and everything looks perfekt

[Silverlining_m2]

Got my ass wet in the snow and rain and added a rear diffuser from Ikon.

[Javila0530]

I installed a wireless charger retrofit on it