[Fraisey]

Hey everyone,

I have been getting a Drivetrain malfunction error while climbing hills or accelerating to get on a highway.

I cleared the codes to see which came back after reproducing the drivetrain malfunction. I only get 120308- Charge-air pressure control, plausibility Pressure too low.

I know the plastic charge pipes are prone to failure even at stock tune, it was the first thing I inspected and the seam near the top seems to be broken. Could this be causing this error code?

[Billfitz]

I wouldn't be surprised. This is a reasonably priced replacement:
https://www.vr-speed.com/vrsf-charge...xoCT4sQAvD_BwE

[Fraisey]

Originally Posted by Billfitz

I wouldn't be surprised. This is a reasonably priced replacement:
https://www.vr-speed.com/vrsf-charge...xoCT4sQAvD_BwE

Yep this is what I was going to replace it with! Just wanted to be sure that broken seam is what’s most likely causing the problem. Doesn’t matter too much anyways since it’s good preventative maintenance to replace it. Thank you