09-07-2022, 01:07 PM | #23 |
@_sunbish
301
Rep 633
Posts |
I believe he has the two piston 345mm rear brakes. I don't know the wheel specs.
If I had to guess: ARC-8's either 17x9 et30 or 17x9.5 et35 Welds probably 17x10 et40
__________________
'14 435i RWD - BM3 stage 2+ E30/bolt ons/stock turbo/full drag pack -- [10.9@125].....60 to 130 - 8.5
'16 340i RWD - BM3 stage 2+ E50/bolt ons/stock turbo/full drag pack -- [10.2@131]......60 to 130 - 7.5 |
Appreciate
0
|
09-10-2022, 09:12 PM | #24 |
Private
5
Rep 73
Posts |
ARC-8 17x9 et30 wont work with 345mm,rear painted performance calipers(blue,orange,red,yellow). Apex says none of their 17" will. its the inner barrel that is problematic on 17" wheels.The inner barrel diameter/not width or offset. however if one wanted to start filing down parts/calipers/ears on the calipers w a file u can make them work im sure. technically they fit. but the least amount of debri in there cause them to scar up the inner barrel.
i think most manufacturers say at least 3mm of clearance on all sides of caliper. Last edited by jjjccc; 09-11-2022 at 07:48 PM.. |
Appreciate
0
|
10-04-2022, 11:13 AM | #25 | |
Private
27
Rep 50
Posts |
Quote:
|
|
Appreciate
0
|
10-04-2022, 04:15 PM | #26 | ||
Major General
4943
Rep 5,801
Posts
Drives: 2015 BMW 335i x-Drive Auto
Join Date: Oct 2017
Location: New Jersey/Philadelphia
|
Quote:
|
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|