[mithilbalajis@gmail.com]

I got my car from the dealer and they had reset the software.
Now when trying to VO code to reset the HU_NBT it says

File for "cafd_00001ef6-006_055_013" not found! [C012]

Can you let me know which version of PSDz should be used, or it would be great if you could share the missing file.

[shawnsheridan]

Originally Posted by mithilbalajis@gmail.com

I got my car from the dealer and they had reset the software.
Now when trying to VO code to reset the HU_NBT it says

File for "cafd_00001ef6-006_055_013" not found! [C012]

Can you let me know which version of PSDz should be used, or it would be great if you could share the missing file.

Use latest v.4.37.42_PSdZData_Lite. Your Receive PM function is disabled. PM me when working.

[GerryDollso]

hi,

I just retrofitted power folding mirrors to my 2016 BMW f36 as per the instrutions, but when i try to code 430 using esys i get an error that cafd_00000794.caf.012_035_117 is missing/cannot be found after coding finishes.

im using e-sys version 3.33.0 with v.63.3 psdzdata lite and cafd_00000794.caf.012_035_117 is located in the cafd folder.

i have tried deleting psdzdata and updating it but still same error.

do i need a more up to date e-sys/psdxdata?

any help appreciated.

thanks,
Gerry

[shawnsheridan]

Originally Posted by GerryDollso

hi,

I just retrofitted power folding mirrors to my 2016 BMW f36 as per the instrutions, but when i try to code 430 using esys i get an error that cafd_00000794.caf.012_035_117 is missing/cannot be found after coding finishes.

im using e-sys version 3.33.0 with v.63.3 psdzdata lite and cafd_00000794.caf.012_035_117 is located in the cafd folder.

i have tried deleting psdzdata and updating it but still same error.

do i need a more up to date e-sys/psdxdata?

any help appreciated.

thanks,
Gerry

Add to your psdzdata\swe\cafd folder:

https://mega.nz/file/FxYRASxb#7H9iAY...a2ea8yW6vlEZZk

[GerryDollso]

Cheers shawnsheridan !

I will replace the one I have with this one in the morning and try again, then report back.

Just curious, but what is the difference between this file and the one i currently have?

Cheers again!

Gerry.

[shawnsheridan]

Originally Posted by GerryDollso

Cheers shawnsheridan !

I will replace the one I have with this one in the morning and try again, then report back.

Just curious, but what is the difference between this file and the one i currently have?

Cheers again!

Gerry.

Not sure. You say CAFD is present, error says otherwise. You are sure you have cafd_00000794.caf.012_035_117 and it is in C:\psdzdata\swe\cafd folder?

[mithilbalajis@gmail.com]

Thanks for the suggestion, will let you know if this works and solves the issue.

[mithilbalajis@gmail.com]

Originally Posted by shawnsheridan

Use latest v.4.37.42_PSdZData_Lite. Your Receive PM function is disabled. PM me when working.

Thanks for the suggestion, will try and keep you posted if this resolves the issue.

[GerryDollso]

Hi again shawnsheridan

I tried again from fresh with the file you supplied which was newer and larger than the one i already had, but problem still persists.

I have D:\Data set in E-Sys settings and the file was put into D:\Data\psdzdata\swe\cafd.

if I try to Read (ECU) and then Read coding Data i get the following errors:

when i first try to read the ECU:



then when I try to read coding data for the ecu:



if i try Read SVT actual from VCM then then select the ECU and try to Code i get the following error:

During coding:



After Coding Finishes:



I don't have a token/launcher for E-sys but was under the impression this wasn't necessary for what I'm trying to do which is code in the power folding mirrors (430) I have retro fitted? although 430 has saved to the FA on the car even with the errors, as it shows up when I read VO, but nothing works.

any help much appreciated!

Cheers,
Gerry.

[shawnsheridan]

Originally Posted by GerryDollso

Hi again shawnsheridan

I tried again from fresh with the file you supplied which was newer and larger than the one i already had, but problem still persists.

What E-Sys version are you using, and what PSdZData version?

[GerryDollso]

sorry the images from my drobox haven't displayed on the post, the 3rd attachment is the first image for the first read ecu error, the 1st attachment is for when I try to read coding data, the 2nd and 4th are from when I try to code.

sorry about that!

Gerry.

[shawnsheridan]

Originally Posted by GerryDollso

sorry the images from my drobox haven't displayed on the post, the 3rd attachment is the first image for the first read ecu error, the 1st attachment is for when I try to read coding data, the 2nd and 4th are from when I try to code.

sorry about that!

Gerry.

What E-Sys version are you using, and what PSdZData version?

[GerryDollso]

Originally Posted by shawnsheridan

What E-Sys version are you using, and what PSdZData version?

hey,

E-Sys version 3.33.0 / PSdZ version 5.07.01

with v.63.3_PSdZDats_Lite

cheers,
Gerry.

[shawnsheridan]

Originally Posted by GerryDollso

hey,

E-Sys version 3.33.0 / PSdZ version 5.07.01

with v.63.3_PSdZDats_Lite

cheers,
Gerry.

63.3 PSdZData is way too old for E-Sys 3.39. You need to update your PSdZData. Your Receive PM function is disabled. PM me when working.

[GerryDollso]

Originally Posted by shawnsheridan

63.3 PSdZData is way too old for E-Sys 3.39. You need to update your PSdZData. Your Receive PM function is disabled. PM me when working.

thanks!

no idea about the PM function being disabled, I assume that's due to me being new?

thanks again,
Gerry

[shawnsheridan]

Originally Posted by GerryDollso

thanks!

no idea about the PM function being disabled, I assume that's due to me being new?

thanks again,
Gerry

Yeah, need account for 7 days and a minimum of 10 posts. You can always PM me on Bimmerfest too.

[GerryDollso]

cheers shawnsheridan

I got v.4.38.11_PSdZData_Lite and everything went smothly this time, or appeared to anyway, no errors.

used BimmerCode to code in auto power fold and tilt, still nothing works, in Bimmercode Vehicle Information the 430 option shows, with no discription, i could have a faulty master switch/mirrors, or is there anything else I would need to code?

Cheers,
Gerry

[shawnsheridan]

Originally Posted by GerryDollso

cheers shawnsheridan

I got v.4.38.11_PSdZData_Lite and everything went smothly this time, or appeared to anyway, no errors.

used BimmerCode to code in auto power fold and tilt, still nothing works, in Bimmercode Vehicle Information the 430 option shows, with no discription, i could have a faulty master switch/mirrors, or is there anything else I would need to code?

Cheers,
Gerry

I don't know anything about BimmerCode. Use E-Sys, Add 430 to FA, load FA in Coding module and VO Code car.

[GerryDollso]

All sorted now, the door switch was at fault, got another one and everything works as it should now. Cheers again for all the help!

[shawnsheridan]

Originally Posted by GerryDollso

All sorted now, the door switch was at fault, got another one and everything works as it should now. Cheers again for all the help!

[jfilipe]

Hi guys, I'm new to coding and using e-sys and I'm trying to learn! But I need help, can someone explain to me what's going on? When I try to encode FEM_BODY I always get this error:




Thanks!

[shawnsheridan]

Originally Posted by jfilipe

Hi guys, I'm new to coding and using e-sys and I'm trying to learn! But I need help, can someone explain to me what's going on? When I try to encode FEM_BODY I always get this error:

Thanks!

cafd_ffffffff-255_255_255 means you corrupted CAFD. You need to inject CAFD and VO Code ECU to fix it.

And stop doing what you are doing to corrupt it...