[luuisalbberto]

Last night I was riding my car when suddenly the third cylinder started to fail, I scanned it and the following errors appeared:
1BC112 zero gear sensor, electrical: short circuit to positive
101410 theottle valve, adaptation: boundary conditions not met, battery voltage too low
113026 relay ignition and injectors, supply voltage injection: short circuit to ground

and the car would not start anymore, I went in with the scanner and reset the DME and the car worked but still missing the third cylinder...
the third cylinder coil is overheating, to the point of melting

now the car works, but with the following errors:
150302 ignition, cylinder 3: combustion time too short
1F0514 valvetronic, supply voltage: short circuit to ground