02-22-2021, 09:10 AM | #23 |
Registered
0
Rep 2
Posts |
So the question I have I think is pretty simple but want other BMW guys to chime in. So currently I am running the style 361 in 20x8 et 36 in the front and 20x8.5 et 47 in the rear with 265/30zr20 all around. I don’t have any rubbing issues or anything at the moment. I bought the car like this and not sure if it has been lowered at all. I like the height and wheel well space just fine. I want a more meaty tire and was looking at going with 18x9 up front with et 35 or something close and 235/45zr18 up front (26.3 x 9.3 tire) and 18x10 in the rear et 45 with a 265/40zr18 in the rear (26.3 x 10.4 tire) these tires match up height wise with my current ones and the front tires are 9.3 vs 10.4 wide on my current ones. I would think I would be perfectly fine but just want to verify this. Any thoughts?
|
Appreciate
0
|
02-26-2021, 10:38 AM | #24 |
Enlisted Member
14
Rep 30
Posts |
Hey guys, I have a F32 435i. Was curious with others experiences with fitment. It's currently stock suspension. I'm personally looking for (idk the proper terminology) the wheel and tire to be flush with the fender with no rubbing. Eventually plan on lowering with coilovers. Just seeing what people's thoughts are on going wide like the examples listed or should I stick to thinner wheels? I've been looking at rohana rfx11s front 19x8.5 and rear 19x9.5. Any suggestions? Thanks!
|
Appreciate
0
|
02-26-2021, 10:47 AM | #25 | |
New Member
0
Rep 5
Posts |
Quote:
|
|
Appreciate
0
|
02-26-2021, 11:22 PM | #26 | |
Enthusiast
219
Rep 376
Posts |
Quote:
__________________
|
|
Appreciate
0
|
03-10-2021, 04:38 PM | #27 |
Private First Class
13
Rep 130
Posts |
Hello guys, just about to pull the trigger on some wheels but wanted to know if the size 18x9.5 +27 square wheel setup would fit with maybe 255/40/18 tires all round lowered with a basic set of springs?
|
Appreciate
0
|
11-13-2021, 06:30 PM | #28 |
Enlisted Member
5
Rep 41
Posts |
Hi mate
The bbs rsii look amazing!! So I have recently picked up a set of bbs rs793 which I want to build for my f36, assuming the similarities between the f30 and f36 for fitment! But what size lips and barrels did you run ? Any help would be appreciated |
Appreciate
0
|
11-21-2021, 02:39 PM | #29 |
Registered
0
Rep 2
Posts |
Would I be able to run 19x9.5 +35 and 19x10.5 +35 if I am on lowering springs on my F30? Would that even look good?
|
Appreciate
0
|
11-22-2021, 08:08 AM | #30 |
Second Lieutenant
572
Rep 296
Posts |
|
Appreciate
0
|
12-01-2021, 12:55 AM | #31 |
Enthusiast
219
Rep 376
Posts |
You can but it may poke out with stock camber.
__________________
|
Appreciate
0
|
11-17-2022, 07:54 PM | #33 |
Private First Class
40
Rep 129
Posts |
I just bought 9.5 + 38 wheels square on 255/40/18. Seems doable with a front spacer so just sorting that out as we speak. Then a bit of a camber to look flush and it'll be quite aggressive. I'm hoping
__________________
2011 E92 M3 - Mineral White - Pure Edition I
|
Appreciate
0
|
01-20-2024, 11:29 AM | #34 | |
Private
15
Rep 53
Posts |
Quote:
I’m currently on my winter setup with 255/35/19 et 35 squared and I’m rubbing on full lock out without being lowered, I’m sure it’ll get worst when I do lower the car. Unless i run spacers? (Somewhat new to the whole fitment thing) Thanks in advance! |
|
Appreciate
0
|
01-22-2024, 02:13 PM | #35 |
Enthusiast
219
Rep 376
Posts |
Consider running 18 or 19x9.5 ET +38 with a 245/35/18 and it should be fine on springs. You may need a small spacer up front to clear the spring
__________________
|
Appreciate
0
|
02-19-2024, 11:20 AM | #36 |
New Member
9
Rep 16
Posts |
Can I install 225/45R18 on 18x8.0 ET34 (OEM RIM PN 7845880) on the front and 255/40R18 on 18x8.5 ET47 (OEM RIM PN 7845881)on the rear of my 2013 328i xDrive (Non Msport)
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
aggressive, fender to lip, fitment, meaty, wheel and tire, wheel sizes |
|
|