[zibbit]

Originally Posted by mrrocky

zibbit
You just quoted answer
I my case

haha, thanks. I guess I should've read a little closer.

[klepic]

Originally Posted by awmenard

Very nice, I have a new file that has one piece per door, I will get mine redone

Hello, can you please send me an one piece per door file for BMW F30 ambient lightning strips for 3D printing?

My e-mail is: Klepicpredrag@gmail.com

Thank you so much, sir!

[lqchko]

Originally Posted by klepic

Hello, can you please send me an one piece per door file for BMW F30 ambient lightning strips for 3D printing?

My e-mail is: Klepicpredrag@gmail.com

Thank you so much, sir!

Thank you too.

[nyf30]

Originally Posted by klepic

Hello, can you please send me an one piece per door file for BMW F30 ambient lightning strips for 3D printing?

My e-mail is: Klepicpredrag@gmail.com

Thank you so much, sir!

Bump for the file. Can you share with me as well?

[McQueenUA]

Originally Posted by awmenard

The file has 3 it was originally made per door and was modified you'll need to as for one extra.

Send me a pm with your email

Hello, can you send me the files? 🙏
ilia1975ilia@gmail.com

[Twix2300]

Hey, I know Im a bit late to this thread But could someone please send me the file to my mail?

Twix2300@hotmail.com, I would gladly send some money to whoever provides it

Thank you🙏

[Twix2300]

Could someone please send me the file, Ill pay you🙏

Twix2300@hotmail.com

[eff32fl]

Originally Posted by Twix2300

Could someone please send me the file, Ill pay you🙏

Twix2300@hotmail.com

You can buy them super cheap on Amazon or ebay.

[kosteg]

Hi, does anyone is able to send stl? Topic is old and I'm not able to find file anywhere.

[gameson]

i don't like to buy the whole led kit for the car that has 7 colors. but i do want to enhance the dim led strip on the door and AC.

is this one way to do it? if so, where to buy the plastic strip? i don't have 3d printer and don't want to be bothered printing and etc.

thanks.

[eff32fl]

Originally Posted by gameson

i don't like to buy the whole led kit for the car that has 7 colors. but i do want to enhance the dim led strip on the door and AC.

is this one way to do it? if so, where to buy the plastic strip? i don't have 3d printer and don't want to be bothered printing and etc.

thanks.

There is also a German company named Benzinfabrik. They sell replacement ambient lighting LED modules that are brighter than the OEM modules. I and many others have used them they're great products. They also offer different 2 color combinations.

[gameson]

Originally Posted by eff32fl

There is also a German company named Benzinfabrik. They sell replacement ambient lighting LED modules that are brighter than the OEM modules. I and many others have used them they're great products. They also offer different 2 color combinations.

So what cause the dim brightness is the module and not the led itself? I thought it is the diode led itself, which led me to think that i have to change the led strip, which is a hideous job, or buy that plastic strip that is just inserted.

[eff32fl]

Originally Posted by gameson

So what cause the dim brightness is the module and not the led itself? I thought it is the diode led itself, which led me to think that i have to change the led strip, which is a hideous job, or buy that plastic strip that is just inserted.

The LED module itself causes the dim brightness. Probably the resistor(s) ultimately. An aftermarket LED module is your best bet for more brightness. The rubber strip just focuses the light more.

[gameson]

Originally Posted by eff32fl

The LED module itself causes the dim brightness. Probably the resistor(s) ultimately. An aftermarket LED module is your best bet for more brightness. The rubber strip just focuses the light more.

How about the ac surround trim? It is not as bright, does it use the same module as the door trim? Thanks.

[eff32fl]

Originally Posted by gameson

How about the ac surround trim? It is not as bright, does it use the same module as the door trim? Thanks.

The AC surround uses a different kind of LED module. Benzinfabrik sells a replacement module for that also.

[gameson]

Originally Posted by eff32fl

The AC surround uses a different kind of LED module. Benzinfabrik sells a replacement module for that also.

Yes, i searched on youtube, most of the videos are led for more than 2 colors, but i found it

Just putting it here for my reference once i get the module.

[eff32fl]

Originally Posted by gameson

Yes, i searched on youtube, most of the videos are led for more than 2 colors, but i found it

https://youtu.be/tf_VIW6K0rE

Just putting it here for my reference once i get the module.

Check this post it outlines the LED modules needed if you go the Benzinfabrik route.

https://www.bimmerpost.com/forums/sh...php?p=30679367

[gameson]

Originally Posted by eff32fl

Check this post it outlines the LED modules needed if you go the Benzinfabrik route.

https://www.bimmerpost.com/forums/sh...php?p=30679367

I already bought this footwell led prior to me knowing about benzinfabrik.

I wonder if the blue will match the benzinfabrik module.

What do you think?

https://www.aliexpress.com/item/3256806244585952.html

[eff32fl]

Originally Posted by gameson

I already bought this footwell led prior to me knowing about benzinfabrik.

I wonder if the blue will match the benzinfabrik module.

What do you think?

https://www.aliexpress.com/item/3256806244585952.html

The blues won't match unfortunately. The Chinese kits use ice blue aka light blue. The Benzinfabrik modules use regular blue aka a deep blue.

[gameson]

Swapping the led board on the footwell would be the easiest compare to swapping the led on the door trim and ac, right? Just open the housing and swap.

[eff32fl]

Originally Posted by gameson

Swapping the led board on the footwell would be the easiest compare to swapping the led on the door trim and ac, right? Just open the housing and swap.

Yes the footwell lights are the easiest followed by the radio trim and lastly the door cards imo.