08-27-2023, 05:06 PM | #89 |
New Member
0
Rep 6
Posts |
Hi all, sorry to resurrect a dead thread but thought this was the best place to ask.
Today I have used this thread to retrofit high beam assist (and cruise control) to my car. The labour itself was pretty easy (thanks to this thread), and I am having it coded in the week but wanted to get the labour done at the weekend. I assumed that I would be able to drive the car until then without any issues, just obviously without the two retrofits working. However, it has backfired. Nothing on the stalks or steering wheel works, and the wipers are permanently on. I have checked the fuses in the front and the FEM to check if any had blown, which they haven't. Is this likely because the new stalks haven't been coded and they will not work at all? I assumed (perhaps wrongly) that it would work as before, as I have seen people retrofit cruise control and the limiter still works as normal until it is coded to the car. Or am I looking at something more problematic, like the new stalks not working or worse a module which has been fried? Any suggestions/insight would be really welcome! |
Appreciate
0
|
08-29-2023, 05:06 AM | #91 | |
New Member
0
Rep 6
Posts |
Quote:
I've also assumed that before coding HBA, the original features from the old stalks would still work with the newly retrofitted stalks, just the HBA obviously wouldn't. I wasn't expecting the stalk (and now the steering wheel buttons) to not work at all. Appreciate I've made two assumptions there which may be wrong! |
|
Appreciate
0
|
08-29-2023, 08:40 AM | #92 | |
New Member
0
Rep 6
Posts |
Quote:
One connection uses a different sort of clip which has a grey arm which swings round and latches the connector into place. I noticed this was slightly broken on mine and hadn't latched properly. After managing to make it latch into place properly, I put it all back together and it is now working as before! I'm hoping to have it coded within the week, so I will come back to say whether the part works for completeness then. |
|
Appreciate
0
|
09-16-2023, 12:30 PM | #93 | |
New Member
0
Rep 6
Posts |
Quote:
|
|
Appreciate
0
|
05-17-2024, 06:14 AM | #94 | |
Registered
3
Rep 4
Posts |
Quote:
Would appreciate if anyone has any more Pics which may help me I am going to attempt this weekend thanks in advance guys |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|