[valeron06]

Yes, I checked everything and the headlights were brand new.

[TheNine90]

How did you code the modules?

[valeron06]

I change mapping_parkl_output,mapping_standl_output,mapping _tagfahrl_output from the fembody module

[TheNine90]

Are the modules available in esys?

[valeron06]

Yes, these modules are available on the esys fembody channel. I make the changes and write them to the vehicle with fdl code. The fault is cleared and the parking lights are on. It turns off after the vehicle goes to sleep.

[Siki78]

Did you do retrofit from halogen to led?

[valeron06]

Yes

[Siki78]

You are positive that your power connect to fuse F40 and F100

[valeron06]

Hello, yes there is no problem with the switch. The only problem is that the code I wrote to the car malfunctioned again the next day and extinguished the angels. but angels don't work even though they are active like explosions

[catalin.raileanu]

Hi! I change my halogen headlights to Led headlights afermarket! I have this problem at high beam flinkering when is high beam set! And the led drl is close only i locked my car! If don’t loked, the drl stay open permanently!