[Ldr_04]

Hello,

I am retrofitting 3AG to my f31 with a retrofitted NBT HU. The TRSVC Is coded and it does have a CAFD file. The problem is NBT, every time I try to code the HU_NBT, it gives the error cafd not executable. I can however FDL code this same CAFD and coding FDL works. If I try to inject a new CAFD it only gives the option to inject the same CAFD version and that doesn’t work either.
I tried different Esys versions ( 3.27, 3.30 ), all sorts of PSDZdata ( 4.20 - 4.58 ) but nothing is working. Does anybody have an idea what to try next?


The NBT is retrofitted by a company who does stolen f30 cluster and hu’s repairs, so as far as I know it’s done right.

[Siki78]

Why you injecting new cafd? Just vo code with new fa and that‘s it

[Ldr_04]

Originally Posted by Siki78

Why you injecting new cafd? Just vo code with new fa and that‘s it

Because when I VO code the new FA the NBT gives the error CAFD not executable.
I did FDL code the NBT, now I see the camera menu but the screen is black and I get the error Rear view camera malfunction.

[Siki78]

If you using 4.58 psdzdata use newer esys like 24.06.1. Run tal calculation with 3AG in FA and see if you have Hardware different on HU

[Siki78]

Write me pm with anydesk I am availble to see what is going on

[Ldr_04]

I will try the newer esys version, the weird thing is even when the FA does not contain 3AG it cannot execute the CAFD of NBT HU.

[Ldr_04]

Hey I just FDL coded the camera.
The screen shows up but the camera is all black.
The internet says to calibrate the camera but I don’t have space on my MacBook to download ISTA.
Can you maybe remote calibrate the camera for me?
Thanks.
Let me know what you want for it.

[mig2830]

Whitch pins did you use when connecting the camera signal to the HU? FBAS+ is pin 21, FBAS- is pin 24 and schreen is pin 23

[Ldr_04]

I did it per BMW retrofit manual.
It is fixed now I had to calibrate the camera via ISTA.
Thanks for all the help.