[azizsaputra]

Hallo,
do you know where or how to buy iDrive Controller Knob from Mekede brand?
i need this part, because i buy android screen for my E84 without iDrive knob, my seller in here is not responsible, i complain but he gone.
can you help me pls

[Shamanix]

Originally Posted by conandrum

Shamanix / RedErik

So with the HU connected, the purpose of this 'middle speaker connectors' is ONLY to play the HU navigation prompts on the middle speaker at all times? (ie. even when the CCC is switched over to FM/CD/DVD etc?)

Right. The speaker's operation is disrupted if you use the KSW-Toolkit. And it works relatively stably. And not with every navigation program.

Originally Posted by conandrum

Secondly:
Is it useful to enable 'FL Speaker Enable' in Factory settings? Why/Why not?

This option has a default value for me. I don't use it. When activating this option on some MCUs, there may be problems with navigation program prompts through the speaker. In my opinion, this option is not compatible with every car. It is used when listening to OEM radio.

Originally Posted by conandrum

GPS & 4G Antenna
My GPS SNR is about 24 (yellow). WhatGPS antenna do you recommend for stronger reception?
Are you happy with the 4G antenna?

The GPS and 4G antennas work perfectly. Even in difficult conditions. If this is not enough for you, then you can connect to the OEM fin. Or use USB GNSS antennas with the ability to receive the L1 and L5 signal. And according to my observations, the quality of GPS signal reception depends on the navigation program itself.
I use https://www.topgnss.store/en-fr/coll...leo-receiver-2


When using Carplay, the data is displayed from the phone, therefore the phone antenna is used. The iPhone 14-15 has a GPS module L1 and L5

Originally Posted by conandrum

Carlinkit CCPA
The HU takes 38 seconds after starting the car, to enter the main menu.
If we now launch the autokit app (for carlinkit), how many seconds does it take for everything to be ready and functional?

about 1 minute

If it's a lot You can enable the HU download mode in OEM mode and connect the phone from the very beginning to the OEM BT. After downloading the HU, with the necessary settings, everything will be automatically reconnected as your heart desires. And switch the video signal to android

[Basti600]

Originally Posted by Basti600

Hello everyone,

is there actually a way to set the lines (in this case yellow and red) to the vehicle width?

... or is it simply not possible?

[Shamanix]

Originally Posted by Basti600

... or is it simply not possible?

impossible

[fackamato]

Does this thread cover the hardware anywhere? What display / equipment is this thread referring to?

Thanks

[RedErik]

Originally Posted by fackamato

Does this thread cover the hardware anywhere? What display / equipment is this thread referring to?

Thanks

Read the first post.

[Steljo]

Hi guys,i buy a new navigation and have a one question in my head

According from 1st post - CPU: Qualcomm Snapdragon 662 - 8 Core (4x 2Ghz & 4x 1.8 Ghz) - short "SD662 or M600" is it true this GT6-EUA=M600 ?

All my info about navigation:

GT6-EUA
MCU Ver
4151A0eLZH-C&C-KTL-DC-230713G
APP Ver
20231205GT_KSW_1920x720_EAU
System Ver
GT6-EAU-T16.00.050-userdebug-20231205.165619
AndroidVer: 13
BT Ver
BLINK 6125_R_2023/12/2-11:31:28

I make a 2 update`s from mega link with mega:..//GT6_KSW/EAU/ no problem.

Can i use Ksw-T-M600_OS_v x.x.x Android 13 for my platform ?

2nd question is for Factory_config.xml for this system, can i use someone, now i have only two UI`s ID7/ID8 ?

[RedErik]

Originally Posted by Steljo

Hi guys,i buy a new navigation and have a one question in my head

According from 1st post - CPU: Qualcomm Snapdragon 662 - 8 Core (4x 2Ghz & 4x 1.8 Ghz) - short "SD662 or M600" is it true this GT6-EUA=M600 ?

All my info about navigation:

GT6-EUA
MCU Ver
4151A0eLZH-C&C-KTL-DC-230713G
APP Ver
20231205GT_KSW_1920x720_EAU
System Ver
GT6-EAU-T16.00.050-userdebug-20231205.165619
AndroidVer: 13
BT Ver
BLINK 6125_R_2023/12/2-11:31:28

I make a 2 update`s from mega link with mega:..//GT6_KSW/EAU/ no problem.

Can i use Ksw-T-M600_OS_v x.x.x Android 13 for my platform ?

2nd question is for Factory_config.xml for this system, can i use someone, now i have only two UI`s ID7/ID8 ?

You can only use GT6_KSW update files for your unit.

The factory_config.xml should work for both version - classic KSW and GT6 KSW.

[Steljo]

Ok, Which Factory_config to use i found for SD625 -Factory_config_BMW_A10_394.zip
For Android 10 ?

[RedErik]

Originally Posted by Steljo

Ok, Which Factory_config to use i found for SD625 -Factory_config_BMW_A10_394.zip
For Android 10 ?

Use the latest one for A11/A12/A13 versions.

[Steljo]

Originally Posted by RedErik

Use the latest one for A11/A12/A13 versions.

Ok, Factory-config from SD625 and SD662 is the same ?

[RedErik]

Originally Posted by Steljo

Ok, Factory-config from SD625 and SD662 is the same ?

Yes and no. Yes factor_config.xml for SD625 will work on SD662. No factory_config.xml for SD662 will have a few more options if I remember correctly.

[Steljo]

From where can i get this factory-config for 662 i read this - https://gist.github.com/kamilbrk/6cf...ory-config-xml

[RedErik]

Originally Posted by Steljo

From where can i get this factory-config for 662 i read this - https://gist.github.com/kamilbrk/6cf...ory-config-xml

That's the one.

[Steljo]

Originally Posted by RedErik

That's the one.

Thank you very much for the information

[Steljo]

Yesterday upload factory_config.xml but not correct for my navigation, how to upload correct one ? Try to put new one in OEM folder but not recognize.

[Shamanix]

Originally Posted by Steljo

Yesterday upload factory_config.xml but not correct for my navigation, how to upload correct one ? Try to put new one in OEM folder but not recognize.

https://f30.bimmerpost.com/forums/sh....php?t=1699764

[Steljo]

Sucsses with put another factory_config but UI themes is empty...

[Shamanix]

Originally Posted by Steljo

Sucsses with put another factory_config but UI themes is empty...

https://we.tl/t-yAutNgI4PR
GT-BMW-OEM
I took it from here https://www.mekede.com/SoftwareAddress1/

[kentodessa]

Originally Posted by RedErik

Yes and no. Yes factor_config.xml for SD625 will work on SD662. No factory_config.xml for SD662 will have a few more options if I remember correctly.

What about factory config for SD680? Is it exist somewhere for downloading?

[kentodessa]

Originally Posted by Shamanix

https://we.tl/t-yAutNgI4PR
GT-BMW-OEM
I took it from here https://www.mekede.com/SoftwareAddress1/

How recognize factory config there? All have strange names. For example config for bmw A13 SD662 or SD680?

[RedErik]

Originally Posted by kentodessa

What about factory config for SD680? Is it exist somewhere for downloading?

In essence 450, 625, 662, 665 and 680 are the same.