Is it possible to clear check engine codes with Esys / an ENET cable?

invulnerablo · 11-06-2017, 07:35 PM

Quote:

Originally Posted by shawnsheridan

Either is fine. Light is a coincidence I am sure.

is this a way to update the ECUs?

shawnsheridan · 11-06-2017, 07:37 PM

Quote:

Originally Posted by invulnerablo

is this a way to update the ECUs?

Yes, flash ECU's with new firmware.

invulnerablo · 11-06-2017, 07:40 PM

Thank you so much Shawn!!
Tomorrow i will try to update the ECU to the latest!!
Can i do it to all ECUs??

Thank you so much for your help!!

shawnsheridan · 11-06-2017, 07:43 PM

Quote:

Originally Posted by invulnerablo

Thank you so much Shawn!!
Tomorrow i will try to update the ECU to the latest!!
Can i do it to all ECUs??

Thank you so much for your help!!

One or all or any number in between. I wouldn't be doing it without good reason though:

E-Sys - Flashing ECU Guide v.1.0.1.pdf:
https://mega.nz/#!VwIzGJJY!oHCQrh-ax...syn-9eEytBH1qo

valley_nomad · 11-07-2017, 11:50 PM

Hi Shawn, Could you send me the link to Tool32? CEL in my F30 has been on for several days without any other error message. Autozone scanner shows the code P143C which doesn't mean anything. I just want to see if I can clear it using Tool32. Thanks

shawnsheridan · 11-08-2017, 07:13 AM

Quote:

Originally Posted by valley_nomad

Hi Shawn, Could you send me the link to Tool32? CEL in my F30 has been on for several days without any other error message. Autozone scanner shows the code P143C which doesn't mean anything. I just want to see if I can clear it using Tool32. Thanks

PM sent.

leog80 · 11-16-2017, 09:06 PM

Hi Shawn, Could you send me the link to Tool32? i am trying to clear out CEL most likely due to coding. in recent weeks, the car is throwing weird error on hood open error, restraint system warning and faulty transmission error. once all three clears out by itself, the CEL remain lit.

Thanks!

shawnsheridan · 11-16-2017, 09:09 PM

Quote:

Originally Posted by leoe90

Hi Shawn, Could you send me the link to Tool32? i am trying to clear out CEL most likely due to coding. in recent weeks, the car is throwing weird error on hood open error, restraint system warning and faulty transmission error. once all three clears out by itself, the CEL remain lit.

Thanks!

PM sent.

bbtf30 · 11-30-2017, 03:01 PM

Can you please send me the link? I would greatly appreciate it!

shawnsheridan · 11-30-2017, 03:50 PM

Quote:

Originally Posted by bbtf30

Can you please send me the link? I would greatly appreciate it!

PM sent.

B58 parts · 11-30-2017, 08:02 PM

Hi again Shawn.

I have 3 or 4 faults I need to clear ... Can please you link me to the software when you have a minute?

Thanks again ... i'm getting along quite well with the esys.

shawnsheridan · 11-30-2017, 08:05 PM

Quote:

Originally Posted by YuminNuman

Hi again Shawn.

I have 3 or 4 faults I need to clear ... Can please you link me to the software when you have a minute?

Thanks again ... i'm getting along quite well with the esys.

PM sent.

player_pl · 12-02-2017, 05:26 PM

Hello Shawn

It would be nice if you could give me a linik to Tool32.

Thank you in advance.

Mac

shawnsheridan · 12-02-2017, 07:31 PM

Quote:

Originally Posted by player_pl

Hello Shawn

It would be nice if you could give me a linik to Tool32.

Thank you in advance.

Mac

PM sent.

astonia · 12-14-2017, 10:03 PM

Hi Shawn

Can you pm me a link to Tool32.

I tried to load my original VO file and original SVT file to my car before routine service.
And I got 2 error: Drivetrain and Fuel Supply on my iDrive. But my car drives normal when I drove it.
Gonna try to fix it again this evening.

Thank you Shawn.

shawnsheridan · 12-14-2017, 10:21 PM

Quote:

Originally Posted by astonia

Hi Shawn

Can you pm me a link to Tool32.

I tried to load my original VO file and original SVT file to my car before routine service.
And I got 2 error: Drivetrain and Fuel Supply on my iDrive. But my car drives normal when I drove it.
Gonna try to fix it again this evening.

Thank you Shawn.

I would be looking for Missing or Corrupt CAFD before I was looking for Tool32. PM sent.

astonia · 12-15-2017, 03:47 AM

Quote:

Originally Posted by shawnsheridan

I would be looking for Missing or Corrupt CAFD before I was looking for Tool32. PM sent.

Yes I made a mistake, I injected CAFD into DME2 and VO Code it.

A million thanks Shawn.

shawnsheridan · 12-15-2017, 04:44 AM

Quote:

Originally Posted by astonia

Yes I made a mistake, I injected CAFD into DME2 and VO Code it.

A million thanks Shawn.

PaoloBitta · 12-20-2017, 07:37 AM

Hello Shawn,

could send me the last tool32?

I would like to clear the airbag fault.

thanks

shawnsheridan · 12-20-2017, 09:09 AM

Quote:

Originally Posted by PaoloBitta

Hello Shawn,

could send me the last tool32?

I would like to clear the airbag fault.

thanks

PM sent.

vfx19 · 01-21-2018, 01:06 AM

Hi Shawn,
Could send me the last tool32? I would like to clear the passenger restraint fault. Tried esys transmitter but fault still there. Thanks

shawnsheridan · 01-21-2018, 11:56 AM

Quote:

Originally Posted by vfx19

Hi Shawn,
Could send me the last tool32? I would like to clear the passenger restraint fault. Tried esys transmitter but fault still there. Thanks

PM sent.

11-06-2017, 07:40 PM	#399
invulnerablo New Member 0 Rep 10 Posts Drives: BMW 328i 2015 (F30) Join Date: Nov 2017 Location: Vitoria-ES, Brazil iTrader: (0)	Thank you so much Shawn!! Tomorrow i will try to update the ECU to the latest!! Can i do it to all ECUs?? Thank you so much for your help!!
	Appreciate 0 Quote

11-07-2017, 11:50 PM	#401
valley_nomad Private First Class 29 Rep 109 Posts Drives: 2013 F30 328i Join Date: May 2012 Location: Silicon Valley iTrader: (0)	Hi Shawn, Could you send me the link to Tool32? CEL in my F30 has been on for several days without any other error message. Autozone scanner shows the code P143C which doesn't mean anything. I just want to see if I can clear it using Tool32. Thanks
	Appreciate 0 Quote

11-16-2017, 09:06 PM	#403
leog80 Private 7 Rep 72 Posts Drives: 2022 Voodoo Blue M3CX Join Date: Sep 2011 Location: NJ iTrader: (1)	Hi Shawn, Could you send me the link to Tool32? i am trying to clear out CEL most likely due to coding. in recent weeks, the car is throwing weird error on hood open error, restraint system warning and faulty transmission error. once all three clears out by itself, the CEL remain lit. Thanks!
	Appreciate 0 Quote

11-30-2017, 03:01 PM	#405
bbtf30 Registered 0 Rep 2 Posts Drives: Black 2012 328i Join Date: Nov 2017 Location: California iTrader: (0)	Can you please send me the link? I would greatly appreciate it!
	Appreciate 0 Quote

11-30-2017, 08:02 PM	#407
B58 parts Captain 525 Rep 856 Posts Drives: '17 340ix 6MT Join Date: Nov 2017 Location: US iTrader: (0)	Hi again Shawn. I have 3 or 4 faults I need to clear ... Can please you link me to the software when you have a minute? Thanks again ... i'm getting along quite well with the esys.
	Appreciate 0 Quote

12-02-2017, 05:26 PM	#409
player_pl New Member 3 Rep 17 Posts Drives: BMW F36 430xd Join Date: Aug 2017 Location: Poland iTrader: (0)	Hello Shawn It would be nice if you could give me a linik to Tool32. Thank you in advance. Mac
	Appreciate 0 Quote

12-14-2017, 10:03 PM	#411
astonia New Member 0 Rep 11 Posts Drives: F30 320i 2015 Join Date: Feb 2017 Location: Jakarta, Indonesia iTrader: (0)	Hi Shawn Can you pm me a link to Tool32. I tried to load my original VO file and original SVT file to my car before routine service. And I got 2 error: Drivetrain and Fuel Supply on my iDrive. But my car drives normal when I drove it. Gonna try to fix it again this evening. Thank you Shawn. __________________ 2015 F30 320i - Magnaflow cat-back #15235, CAI Afe Power Momentum Pro5R
	Appreciate 0 Quote

12-20-2017, 07:37 AM	#415
PaoloBitta Registered 0 Rep 4 Posts Drives: F31 Join Date: Nov 2015 Location: Italy iTrader: (0)	Hello Shawn, could send me the last tool32? I would like to clear the airbag fault. thanks
	Appreciate 0 Quote

01-21-2018, 01:06 AM	#417
vfx19 New Member 0 Rep 15 Posts Drives: 2015 BMW 320i Join Date: Nov 2017 Location: San Diego iTrader: (0)	Hi Shawn, Could send me the last tool32? I would like to clear the passenger restraint fault. Tried esys transmitter but fault still there. Thanks
	Appreciate 0 Quote