BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

shawnsheridan · 10-24-2014, 03:32 PM

Quote:

Originally Posted by alienranch

Hey Shawn - can you PM me the latest PSdZData light data files? Is 3.24.3 still valid for the latest PSdZData files? Thanks.

E-Sys 3.24.3 is still good for 54.0 PSdZData.

PM sent.

Prissy · 10-24-2014, 09:16 PM

Where can I find a detailed list of possible things that can be coded for a F30?

avgor123 · 10-25-2014, 04:26 AM

Quote:

Originally Posted by shawnsheridan

E-Sys 3.24.3 is still good for 54.0 PSdZData.

PM sent.

Hi, Shawn!
Maybe you can post here a little table with mapping of E-SYS versions to PSdZData versions?

Versys · 10-25-2014, 05:24 AM

Hi, Shawn!
Can you sent me in PM links for the latest versions of E-Sys and PSdZdata?

shawnsheridan · 10-25-2014, 10:04 AM

Quote:

Originally Posted by avgor123

Hi, Shawn!
Maybe you can post here a little table with mapping of E-SYS versions to PSdZData versions?

There is no table, and it is complicated as they are neither 100% forward nor backwards compatible. But, going from my memory here:

E-Sys 3.18.4 and 3.22.x are dead. If anyone is using older PSdZData with these versions, it is fine to keep using them. When it is time to update their PSdZData though, they will need to move to the latest PSdZData and E-Sys versions at that same time. E-Sys 3.18.4 can only be used with PSdZData up to 48.2 for F20 Target, and 48.3 for all other Targets. E-Sys 3.18.4 is also unsuitable for Flashing ECU's. I do not know if 3.22.x has a maximum PSdZData as I hardly ever used it since 3.23.4 followed shortly after it.

E-Sys 3.23.4, 3.24.x, and 3.25.x can be used with any PSdZData up to current 54.0 version.

E-Sys 3.26.x works only with PSdZData version 53.5 up to current 54.0 version. So, it is wise to keep an older version like E-Sys 3.24.3 around in case you ever have to flash an ECU with older pre 53.5 PSdZData version.

shawnsheridan · 10-25-2014, 10:06 AM

Quote:

Originally Posted by Versys

Hi, Shawn!
Can you sent me in PM links for the latest versions of E-Sys and PSdZdata?

PM sent.

fea30boy · 10-25-2014, 10:17 AM

Shawn, could you send me the links too?

Thanks

shawnsheridan · 10-25-2014, 07:42 PM

Quote:

Originally Posted by fea30boy

Shawn, could you send me the links too?

Thanks

PM sent.

shawnsheridan · 10-26-2014, 08:27 AM

Quote:

Originally Posted by ascarneiro

...Shawn, please let me know if is possible - and which code I need modify to enable EBT.

Thank

Yes. See my detailed instructions here:

http://www.bimmerfest.com/forums/sho...d.php?t=666531

shawnsheridan · 10-26-2014, 02:23 PM

Quote:

Originally Posted by ascarneiro

Shawn

Thank but your link directo to a "F10 6WA retrofit KOMBI" topic. I dont see anything related to enhanced blue tooth.

Your instructions about bluet tooh are on this topic?

thank

Sorry, I pasted wrong link. Here is correct one:

http://f30.bimmerpost.com/forums/sho...65&postcount=9

Merlinx1 · 10-27-2014, 10:52 AM

Hi can I have the link too?
F20 july 2012
thx

shawnsheridan · 10-27-2014, 11:00 AM

Quote:

Originally Posted by Merlinx1

Hi can I have the link too?
F20 july 2012
thx

PM sent.

jeff328 · 10-27-2014, 12:11 PM

Shawn, would you please send me the file links?

Thanks in advance.

shawnsheridan · 10-27-2014, 12:32 PM

Quote:

Originally Posted by jeff328

Shawn, would you please send me the file links?

Thanks in advance.

PM sent.

kriszty · 10-27-2014, 02:39 PM

Hi S,

can you also send me the link ?
thx and greets from a cold Holland,
Kriszty

shawnsheridan · 10-27-2014, 04:19 PM

Quote:

Originally Posted by kriszty

Hi S,

can you also send me the link ?
thx and greets from a cold Holland,
Kriszty

PM sent.

BeatB · 10-28-2014, 11:05 AM

Can I find out if I have a gyroscope in my ICM module by looking in the coding data?

Maybe with esys looking for: GYRO_INTERN?

shawnsheridan · 10-28-2014, 12:00 PM

Quote:

Originally Posted by BeatB

Can I find out if I have a gyroscope in my ICM module by looking in the coding data?

Maybe with esys looking for: GYRO_INTERN?

If NBT => GYRO_INTERN = nicht_aktiv, then Gyro data is coming from ICM.

bjvincent · 10-28-2014, 12:10 PM

Hi all, coding question for you...

I have coded my F30 to always start in Eco Pro mode (mainly for when my wife drives it

), but I would like to get rid of the blue "extra miles" display that shows up in the instrument cluster while in Eco Pro mode. Particularly since, on the F30, it blocks other items that could be displayed such as instant mileage, range, and so on (you have to cycle back to these using the BC button).

In other modes (comfort, sport, etc), the display retains whatever I set it to, but every time I start the car it defaults back to the blue extra miles display (since it always starts in Eco Pro mode). Is there any way to change or disable this, via coding or otherwise? Many thanks for any ideas/comments.

bjvincent · 10-28-2014, 10:54 PM

Never mind my previous post... after a bit of trial and error, I think I found what I was looking for:

KOMBI > 300C > ECO_RW_DIGITAL_ENABLE – change to NICHT_AKTIV

This appears to disable the blue "extra range display" in Eco Pro mode, for anyone who is interested in doing the same...

rayc325 · 10-29-2014, 02:21 PM

Hi, Shawn!

Can you sent me in PM links for the latest versions of E-Sys and PSdZdata? For 2013 328i.

Also looking for the best place to get the cable..

Thanks

ATLBlue · 10-29-2014, 02:37 PM

Another request for the download link, Shawn. I can see we keep you quite busy!
2014 F30 335i in case the link is specific to a type of car.

Thanks A LOT in advance!

10-24-2014, 09:16 PM	#7482
Prissy Brigadier General 1081 Rep 4,856 Posts Drives: M340i Join Date: Sep 2008 Location: NY iTrader: (6) Garage List 2015 BMW F30 [5.50] 2020 M340I [0.00] 2017 X3 [0.00] 2008 BMW E92 [9.00] 2010 BMW E92 [10.00]	Where can I find a detailed list of possible things that can be coded for a F30?
	Appreciate 0 Quote

10-25-2014, 05:24 AM	#7484
Versys RUSSIAN 0 Rep 21 Posts Drives: BMW 320d Xdrive Join Date: Feb 2014 Location: Russian Federation iTrader: (0)	Hi, Shawn! Can you sent me in PM links for the latest versions of E-Sys and PSdZdata?
	Appreciate 0 Quote

10-25-2014, 10:17 AM	#7487
fea30boy Private 2 Rep 54 Posts Drives: F30 320i Join Date: Jan 2014 Location: Brazil iTrader: (0)	Shawn, could you send me the links too? Thanks
	Appreciate 0 Quote

10-27-2014, 10:52 AM	#7491
Merlinx1 New Member 3 Rep 18 Posts Drives: Bmw F20 125i Msport Join Date: Jan 2013 Location: Catania - Sicily iTrader: (0)	Hi can I have the link too? F20 july 2012 thx
	Appreciate 0 Quote

10-27-2014, 12:11 PM	#7493
jeff328 Registered 0 Rep 2 Posts Drives: 2012 328i Join Date: Mar 2014 Location: Dallas iTrader: (0)	need files Shawn, would you please send me the file links? Thanks in advance.
	Appreciate 0 Quote

10-27-2014, 02:39 PM	#7495
kriszty Lieutenant 329 Rep 530 Posts Drives: B58 M240ix pureturbo800 dorch1 Join Date: May 2007 Location: Holland iTrader: (0)	Hi S, can you also send me the link ? thx and greets from a cold Holland, Kriszty
	Appreciate 0 Quote

10-28-2014, 11:05 AM	#7497
BeatB Private First Class 10 Rep 103 Posts Drives: BMW F30 Join Date: May 2014 Location: VIE iTrader: (0)	Can I find out if I have a gyroscope in my ICM module by looking in the coding data? Maybe with esys looking for: GYRO_INTERN?
	Appreciate 0 Quote

10-28-2014, 12:10 PM	#7499
bjvincent New Member 5 Rep 12 Posts Drives: 2013 ActiveHybrid 3, 2015 X5 Join Date: Nov 2012 Location: Roseville, CA iTrader: (0)	Coding question - Eco Pro addl. miles display Hi all, coding question for you... I have coded my F30 to always start in Eco Pro mode (mainly for when my wife drives it ), but I would like to get rid of the blue "extra miles" display that shows up in the instrument cluster while in Eco Pro mode. Particularly since, on the F30, it blocks other items that could be displayed such as instant mileage, range, and so on (you have to cycle back to these using the BC button). In other modes (comfort, sport, etc), the display retains whatever I set it to, but every time I start the car it defaults back to the blue extra miles display (since it always starts in Eco Pro mode). Is there any way to change or disable this, via coding or otherwise? Many thanks for any ideas/comments.
	Appreciate 0 Quote

10-28-2014, 10:54 PM	#7500
bjvincent New Member 5 Rep 12 Posts Drives: 2013 ActiveHybrid 3, 2015 X5 Join Date: Nov 2012 Location: Roseville, CA iTrader: (0)	Coding question - Eco Pro addl. miles display (follow-up) Never mind my previous post... after a bit of trial and error, I think I found what I was looking for: KOMBI > 300C > ECO_RW_DIGITAL_ENABLE – change to NICHT_AKTIV This appears to disable the blue "extra range display" in Eco Pro mode, for anyone who is interested in doing the same...
	Appreciate 1 llebnave12.50 Quote

10-29-2014, 02:21 PM	#7501
rayc325 Private 2 Rep 56 Posts Drives: 2015 X3 xDrive35i Join Date: Aug 2008 Location: The Big Easy iTrader: (0)	Links please? Hi, Shawn! Can you sent me in PM links for the latest versions of E-Sys and PSdZdata? For 2013 328i. Also looking for the best place to get the cable.. Thanks
	Appreciate 0 Quote

10-29-2014, 02:37 PM	#7502
ATLBlue Car OCD 263 Rep 595 Posts Drives: 2017 EBII F36 430d M Sport Join Date: Oct 2014 Location: Belgium, USA... behind the wheel iTrader: (0)	Another request for the download link, Shawn. I can see we keep you quite busy! 2014 F30 335i in case the link is specific to a type of car. Thanks A LOT in advance!
	Appreciate 0 Quote