[stylz]

Originally Posted by shawnsheridan

PM sent.

Thanks so much Shaun! You are a big help to this community.
I'll post how I go.

Kind regards

Paul

[JC_Nitro]

Originally Posted by shawnsheridan

PM sent.

Hello Shawn

can you help me please about this tread!? or someone expert
i post this

http://f30.bimmerpost.com/forums/sho...808444&page=11

User JC_Nitro ( Yesterday, 04:30 PM)

thank you very much

JC

[shawnsheridan]

Originally Posted by JC_Nitro

Hello Shawn

can you help me please about this tread!? or someone expert
i post this

http://f30.bimmerpost.com/forums/sho...808444&page=11

User JC_Nitro ( Yesterday, 04:30 PM)

thank you very much

JC

I am not understanding you. You wrote you have original Xenon lights, so what is it you are trying to do?

[JC_Nitro]

Originally Posted by shawnsheridan

I am not understanding you. You wrote you have original Xenon lights, so what is it you are trying to do?

Hello. Thank Shawn
I need coding... I Fallow the tread f30/f31 xenon retrofit
Now I have stoped at coding

hello

someone can help me about this question... i have a f31 01/2013 europe.
i have just a xenon lights (original headlight)and angel eyes

i have question about this coding...
CODING:
41. Coding is the final step to activate these babies. This is done through Esys using a laptop and ENET cable. I am not going to explain everything about coding, but know it is 100% required in order for the headlights to work. If you do not know how or know someone who does, do not install the headlights as you will not be able to drive at night.
42. First add 522 (xenon lights) and 524 (adaptive lights) to your VO, and then write the VO to the car as explained here (courtesy of shawnsheridan):

http://www.bimmerfest.com/forums/att...6&d=1338725691

43. Now, VO Code FEM_BODY: Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.
44. Then go back and FDL Code the following:
LWR_AHL_TYP = auto./dyn. LWR+AHL = 03
C_FLC_ENA = F030disable (LWR, Leveling sensor)
C_AFS_ENA = F030enable (Light Distribution)
C_BLC_ENA = F030enable (AHL)
C_CLC_ENA = F030enabl (Cornering light)
BLC and CLC are enabled by default, but double check just in case. This should in the adaptive headlights functioning correctly and no error for the autoleveling sensors not working/installed. (Thanks to F30EDR for the help in figuring the correct coding).

step 42 ( only need add 522) it´s correct here?

step 43/44.
in LWR_AHL_TYP = wath i supose select?
C_FLC_ENA = F030disable (LWR, Leveling sensor) disable correct!?
C_AFS_ENA = F030enable (Light Distribution) enable here ? i´m not sure
C_BLC_ENA = F030enable (AHL) enable here ? i´m not sure
C_CLC_ENA = F030enabl (Cornering light) disable here correct??

no need remove the halogen code or search about this?!?!?

need activate or disactivate more itens .. i have angel eyes
thank you very much

JC
QUOTE

[shawnsheridan]

Originally Posted by JC_Nitro

Hello. Thank Shawn
I need coding... I Fallow the tread f30/f31 xenon retrofit
Now I have stoped at coding

If you car has Xenon light from factory, why do you need coding?

[JC_Nitro]

Sorry I not explain correctly. Is not original, the car have halogen from factory... But I buy the original headlights and follow the guide in other post I referred above

Sorry my bad English
Thanks

[shawnsheridan]

Originally Posted by JC_Nitro

Sorry I not explain correctly. Is not original, the car have halogen from factory... But I buy the original headlights and follow the guide in other post I referred above

Sorry my bad English
Thanks

Will you buy Xenon only or Adaptive Xenon lights?

[JC_Nitro]

Originally Posted by shawnsheridan

Will you buy Xenon only or Adaptive Xenon lights?

Hello
Xenon only

[shawnsheridan]

Originally Posted by JC_Nitro

Hello
Xenon only

So, you would add 522 to FA and VO Code FEM_BODY, then FDL Code the following:

C_FLC_ENA = F030disable
C_AFS_ENA = F030enable
C_BLC_ENA = F030disable
C_CLC_ENA = F030enable

I am not sure about LWR_AHL_TYP. This should be disabled I presume.

[JC_Nitro]

Originally Posted by shawnsheridan

So, you would add 522 to FA and VO Code FEM_BODY, then FDL Code the following:

C_FLC_ENA = F030disable
C_AFS_ENA = F030enable
C_BLC_ENA = F030disable
C_CLC_ENA = F030enable

I am not sure about LWR_AHL_TYP. This should be disabled I presume.

thank you very much Shawn

i il try it tomorow

[BigManLT]

Hi Shawn,

Can you send me the links for the latest E-Sys and PSDZData?

Thank you

[shawnsheridan]

Originally Posted by BigManLT

Hi Shawn,

Can you send me the links for the latest E-Sys and PSDZData?

Thank you

PM sent.

[nuttanva]

Hi shawnsheridan,

I just got the cable today.
I'm very new for coding.
Can you send me necessary software for code?

Thank you

[shawnsheridan]

Originally Posted by nuttanva

Hi shawnsheridan,

I just got the cable today.
I'm very new for coding.
Can you send me necessary software for code?

Thank you

PM sent.

[DrPhant0m]

Has anyone here ever heard of, or used, "Carly for BMW?" http://www.mycarly.com/product/bmw-app/

They sell a bluetooth ODB dongle that talks to a companion Android/iPhone app. It's not cheap, so I wanted to know if anyone has used it.

Apparently it can do "all the things" for E-series BMWs, but their website says they're not quite ready for F-series coding.

I'm not advertising for them, or anything... but I do want to drum up interest so that others can compare it to the "real thing" (and tell me if it's worth it.)

[gvanerk]

Hi all,

I want to code my new 2016 model F31. When I try to read the CADF from the FEM_BODY to disable start/stop I receive the following error:

FEM_BODY [40] [K725621]
readCPS o.k.
CAFD_00000794_015_041_203 Fehler:
File for "cafd_00000794-015_041_203" not found! [C012]

The problem seems limited to this specific CADF others like HU_NBT2 are reading fine.

Anybody a clue what could cause this?

[JC_Nitro]

Originally Posted by gvanerk

Hi all,

I want to code my new 2016 model F31. When I try to read the CADF from the FEM_BODY to disable start/stop I receive the following error:

FEM_BODY [40] [K725621]
readCPS o.k.
CAFD_00000794_015_041_203 Fehler:
File for "cafd_00000794-015_041_203" not found! [C012]

The problem seems limited to this specific CADF others like HU_NBT2 are reading fine.

Anybody a clue what could cause this?

hello
please confirm if the anex work for you ... i see it one or more pages above and i have the same problem
but i not test yet
extrat and put it in caf folder
regards
JC

[gvanerk]

Hi,

I tested it, but it seems not to work. :-(

Are you able to test it too?

[jerz_subbie]

I've been reading through this thread over the past week or so and want to do some coding on my f30 328i. However, since the member in the OP is no longer making cables, where are you guys getting cables now? I see plenty of them on ebay.

Also, I read that to setup launch control you may need to update your cars firmware. Is this something the dealer would do or can you DIY?

[shawnsheridan]

Originally Posted by jerz_subbie

I've been reading through this thread over the past week or so and want to do some coding on my f30 328i. However, since the member in the OP is no longer making cables, where are you guys getting cables now? I see plenty of them on ebay.
...

http://www.ebay.com/itm/121604135320

[shawnsheridan]

Originally Posted by gvanerk

Hi all,

I want to code my new 2016 model F31. When I try to read the CADF from the FEM_BODY to disable start/stop I receive the following error:

FEM_BODY [40] [K725621]
readCPS o.k.
CAFD_00000794_015_041_203 Fehler:
File for "cafd_00000794-015_041_203" not found! [C012]

The problem seems limited to this specific CADF others like HU_NBT2 are reading fine.

Anybody a clue what could cause this?

Originally Posted by gvanerk

Hi,

I tested it, but it seems not to work. :-(

Are you able to test it too?

You must update all of your PSdZData. PM sent.

[jerz_subbie]

Thanks Shawn! Ordered.