BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

shawnsheridan · 02-05-2016, 06:13 AM

Quote:

Originally Posted by maexx

Hi Shawn,

first of all: good job! I really appreciate your efforts.

I just installed a front PDC kit and need to do the coding now. (Had rear already insalled before) I am familiar with the basics and know that "508" has to be added to the FA but I'm not sure if that's all I need and how to do it exactly.

Thanks for your help!

After adding 508 to FA, you need to write FA to car, then VO Code affected modules in car (e.g. PDC, TRSVC, CIC/NBT).

PM sent.

maexx · 02-05-2016, 06:20 AM

Quote:

Originally Posted by shawnsheridan

After adding 508 to FA, you need to write FA to car, then VO Code affected modules in car (e.g. PDC, TRSVC, CIC/NBT).

PM sent.

Hi Shawn,

do you know which modules are affected in particular?

Greetings and thank you

shawnsheridan · 02-05-2016, 06:23 AM

Quote:

Originally Posted by maexx

Hi Shawn,

do you know which modules are affected in particular?

Greetings and thank you

The ones I listed in my post above. If you do not have TRSVC, then omit it.

mutters · 02-05-2016, 09:43 AM

Hi Shawn,
New owner, cable on order, feeling confident..

Could you please send me the link for latest E-Sys software and psdzdata.

many thanks

shawnsheridan · 02-05-2016, 10:43 AM

Quote:

Originally Posted by mutters

Hi Shawn,
New owner, cable on order, feeling confident..

Could you please send me the link for latest E-Sys software and psdzdata.

many thanks

PM sent.

ted.makrys · 02-05-2016, 01:37 PM

Hi shawnsheridan ,

Could I please get access to the software etc. ordering a cable now.

Thanks!
Ted

maexx · 02-05-2016, 01:50 PM

Quote:

Originally Posted by shawnsheridan

The ones I listed in my post above. If you do not have TRSVC, then omit it.

Okay did it, worked for the CIC. By PDC you mean the REM?! I tried to code that one but it gave me an error in which it says: cafd_.......... NotExecutable

Do you have any clue on what is going on?

shawnsheridan · 02-05-2016, 02:29 PM

Quote:

Originally Posted by ted.makrys

Hi shawnsheridan ,

Could I please get access to the software etc. ordering a cable now.

Thanks!
Ted

PM sent.

shawnsheridan · 02-05-2016, 02:31 PM

Quote:

Originally Posted by maexx

Okay did it, worked for the CIC. By PDC you mean the REM?! I tried to code that one but it gave me an error in which it says: cafd_.......... NotExecutable

Do you have any clue on what is going on?

No, when you Read ECU, you should have a PDC module.

maexx · 02-05-2016, 02:55 PM

Quote:

Originally Posted by shawnsheridan

No, when you Read ECU, you should have a PDC module.

Well, I dont have a PDC module but there are many PDC parameters in the REM module. (attached a list of modules)

shawnsheridan · 02-05-2016, 02:56 PM

Quote:

Originally Posted by maexx

Well, I dont have a PDC module but there are many PDC parameters in the REM module. (attached a list of modules)

It is possible in F20 that REM is for PDC then. Front Sensor then may be in FEM_BODY. I would VO Code CIC/NBT, REM, and FEM_BODY then.

maexx · 02-05-2016, 03:00 PM

Quote:

Originally Posted by shawnsheridan

It is possible in F20 that REM is for PDC then. Front Sensor then may be in FEM_BODY. I would VO Code CIC/NBT, REM, and FEM_BODY then.

Yes I believe so but do you know anything about these errors? I unearthened a threat from 2013 where it says it is an issue with the psdz-data version but I'm not sure if that is still current.

PS: Did successfully code FEM_Body but front PDC is still not working.

shawnsheridan · 02-05-2016, 03:02 PM

Quote:

Originally Posted by maexx

Yes I believe so but do you know anything about these errors? I unearthened a threat from 2013 where it says it is an issue with the psdz-data version but I'm not sure if that is still current.

PS: Did successfully code FEM_Body but front PDC is still not working.

Take 508 back out of FA, and see if you can VO Code REM, just to see if it is causing the error.

maexx · 02-05-2016, 03:24 PM

Quote:

Originally Posted by shawnsheridan

Take 508 back out of FA, and see if you can VO Code REM, just to see if it is causing the error.

okay I got it working perfectly fine now, you gave me the correct hint! My mistake was that I actually ADDED 508 to VO instead of REPLACING 507 with 508 ... Thank you very much for the great help!

shawnsheridan · 02-05-2016, 03:31 PM

Quote:

Originally Posted by maexx

okay I got it working perfectly fine now, you gave me the correct hint! My mistake was that I actually ADDED 508 to VO instead of REPLACING 507 with 508 ... Thank you very much for the great help!

pmatibag · 02-05-2016, 10:46 PM

Hi shawnsheridan

Can I also have the latest software of E-Sys and the PZdz token? I am currently running 3.26.1

Thank you very much.

shawnsheridan · 02-05-2016, 10:58 PM

Quote:

Originally Posted by pmatibag

Hi shawnsheridan

Can I also have the latest software of E-Sys and the PZdz token? I am currently running 3.26.1

Thank you very much.

PM sent.

denryrodriguez · 02-07-2016, 02:27 PM

Hi shawnsheridan

Can I also have the latest software of E-Sys and the PZdz token?

shawnsheridan · 02-07-2016, 02:38 PM

Quote:

Originally Posted by denryrodriguez

Hi shawnsheridan

Can I also have the latest software of E-Sys and the PZdz token?

PM sent.

mutters · 02-08-2016, 02:00 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thanks again! (And for the clear & easy to follow loading instruction pdf)

imincontrol · 02-09-2016, 01:20 PM

Hi shawnsheridan

Can I also have the latest software of E-Sys and the PZdz token?

shawnsheridan · 02-09-2016, 01:21 PM

Quote:

Originally Posted by imincontrol

Hi shawnsheridan

Can I also have the latest software of E-Sys and the PZdz token?

You cannot send or receive PM's yet. Send me one when you can.

02-05-2016, 09:43 AM	#9904
mutters Registered 0 Rep 3 Posts Drives: f31 330d m sport Join Date: Feb 2016 Location: somerset uk iTrader: (0)	Hi Shawn, New owner, cable on order, feeling confident.. Could you please send me the link for latest E-Sys software and psdzdata. many thanks
	Appreciate 0 Quote

02-05-2016, 01:37 PM	#9906
ted.makrys New Member 0 Rep 5 Posts Drives: 2007 335i 6AT Join Date: Apr 2013 Location: Canada iTrader: (0)	Hi shawnsheridan , Could I please get access to the software etc. ordering a cable now. Thanks! Ted
	Appreciate 0 Quote

02-05-2016, 10:46 PM	#9916
pmatibag New Member 0 Rep 9 Posts Drives: 2014///BMW/// 328i///DINAN SPR Join Date: Jan 2016 Location: Los angeles CA iTrader: (0)	Hi shawnsheridan Can I also have the latest software of E-Sys and the PZdz token? I am currently running 3.26.1 Thank you very much.
	Appreciate 0 Quote

02-07-2016, 02:27 PM	#9918
denryrodriguez New Member 3 Rep 10 Posts Drives: F30 335i M-Tech Join Date: Jul 2015 Location: Miami, FL - USA iTrader: (0)	Thanks in advance Hi shawnsheridan Can I also have the latest software of E-Sys and the PZdz token?
	Appreciate 0 Quote

02-09-2016, 01:20 PM	#9921
imincontrol Registered 0 Rep 1 Posts Drives: BMW 435Xi Join Date: Feb 2016 Location: Canada iTrader: (0)	Thank you! Hi shawnsheridan Can I also have the latest software of E-Sys and the PZdz token?
	Appreciate 0 Quote