[jnj2455]

Looking at a set of wheels, which have the following specs for my F32, RWD, stock M adaptive dampers:


Wheel sizes are
-19x8.5 +30mm front, w/ 235/35/R19 tire
-19x9.5 +35mm rear, w/ 275/30/R19 tire


I know nothing about offsets but I do believe the rear set in particular is a bit on the aggressive side. To that end, I'm wondering if I give it a bit more sidewall, will I have rubbing issues?

AKA change to:

Fronts = 235/40/R19
Rears = 275/35/R19

[alohasurftoad]

235/40/19 + 265/35/19 is a better combo for the width, offset, appearance

[jnj2455]

Originally Posted by alohasurftoad

235/40/19 + 265/35/19 is a better combo for the width, offset, appearance

Thank you. Do you think the 265 width will cause stretch? Because based on what I can see the 275 is kinda stretched as is. Or will more sidewall offset that?

[alohasurftoad]

Here is 265/35/19 mps4s on 9.5 ET45. imo it is not stretched nor bulged, but perfectly fit on 9.5".

also, your planned ET35 will be poking 10mm more than the photo