[F30_320D_UK]

Originally Posted by Wolverine

Oh! And thanks buddy!

I do still like it.

Car looks great for 100k!
I've got 90k on the clock. Mine could do with a nose job and rim refurb in 2023
They age well these F3x series

[breathe3asy]

Originally Posted by BIFCAIDS

I need this front splitter (& skirts) in my life - where can I get?

[BIFCAIDS]

Originally Posted by ceaton88

I need this front splitter (& skirts) in my life - where can I get?

Nowhere currently, I know Carbon Factory sell one but the quality is poor.

You might be able to buy a genuine Varis one if you have £1500. If I had the money I would personally but it's a mental price to pay.

[TurboWeasel]

I'm not feeling the aftermarket splitters at all. Mine came with these horrible chintzy shiny black plastic bits stuck to the bumper when I bought it, which are coming off and going in the bin tomorrow. I don't think the matt kidney grilles are OEM either, so also following said garbage into the wheelie bin.

[Iyrix]

The grills are certainly not OEM. THey are M reps and looks poor. THe black OEM ones are clean. As for the splitter, i like it. But i think it needs to be carbon...

Originally Posted by TurboWeasel

I'm not feeling the aftermarket splitters at all. Mine came with these horrible chintzy shiny black plastic bits stuck to the bumper when I bought it, which are coming off and going in the bin tomorrow. I don't think the matt kidney grilles are OEM either, so also following said garbage into the wheelie bin.

[Alscoob]

Originally Posted by TurboWeasel

I'm not feeling the aftermarket splitters at all. Mine came with these horrible chintzy shiny black plastic bits stuck to the bumper when I bought it, which are coming off and going in the bin tomorrow. I don't think the matt kidney grilles are OEM either, so also following said garbage into the wheelie bin.

If the front splitter is a good fit and sound, why not colour code the black bits to match the car and leave the lower lip black? Would still look purposeful but a little more subtle than it is.

Also do consider that if they have used Betalink or other such glue you may well trash the bumper sections below trying to get it off, meaning a respray and making good in anycase. If its just held on with tape you should be OK though.

This was my old car where I did just that OK its black but gives the idea.

[F32MMC]

Fairly new to owning a BMW but my neighbour wanted to do a photoshoot of my f32 so I thought I'd share his work.

F32 435d, ACS springs, gloss black front splitter etc

[Beejay51]

Few shots of my new to me f31 320d

[AndrewC1989]

Could one of you nice folks provide me with these measurements so I can mount my fender badges correctly?

Beejay51
TurboWeasel
Wolverine

[Pond]

Originally Posted by AndrewC1989

Could one of you nice folks provide me with these measurements so I can mount my fender badges correctly?

Beejay51
TurboWeasel
Wolverine

From the orange lines on your photo:

horizontal = 52mm
vertical = 373mm

[AndrewC1989]

Originally Posted by Pond

From the orange lines on your photo:

horizontal = 52mm
vertical = 373mm

Just to confirm, those measurements are for an F30? I know it’s different for the different body styles.

[Beejay51]

Came out this morning and found someone had drawn 2 orange lines on my car.WTF.😂😂

[Beejay51]

To confirm my measurements which is the image with orange lines a 2017 F31
Longest line 385mm
Short line. 60mm

Hope this helps.

[AndrewC1989]

Originally Posted by Beejay51

To confirm my measurements which is the image with orange lines a 2017 F31
Longest line 385mm
Short line. 60mm

Hope this helps.

Thank you 🙏🏻

I believe these are the correct measurements based on the fact that another person posted this photo in a different thread with confirms the short line

[Beejay51]

Originally Posted by AndrewC1989

Thank you 🙏🏻

I believe these are the correct measurements based on the fact that another person posted this photo in a different thread with confirms the short line

Glad to be of assistance.Hope you can get the car badged.👍

[AndrewC1989]

Originally Posted by Beejay51

Glad to be of assistance.Hope you can get the car badged.👍

Will try to do it today. Just need to pick between the gloss and matte. Thoughts?

[Beejay51]

Originally Posted by AndrewC1989

Will try to do it today. Just need to pick between the gloss and matte. Thoughts?

Mine came fitted with chrome but was toying changing to black as everything else is black.Changed wing mirror covers to the M series black and fitted smoked dynamic turn signal to mirrors.
Had you thought on chrome to kind of mix with wheels,are the front grills gloss black or door trims black?If you are going for all black look personally i would take gloss black.

[Beejay51]

Are you de badged at the rear?

[Alscoob]

Originally Posted by Beejay51

If you are going for all black look personally i would take gloss black.

Agree with this ^^^^

In saying that I've just taken mine off as perfer the clean look that you already have, but of course it is your car and your choice.

[AndrewC1989]

Originally Posted by Beejay51

Are you de badged at the rear?

Si

[AndrewC1989]

Originally Posted by Alscoob

Agree with this ^^^^

In saying that I've just taken mine off as perfer the clean look that you already have, but of course it is your car and your choice.

Grass is always greener, haha. Worst case scenario I’ll take them off, they aren’t OEM and therefore weren’t expensive.

[AndrewC1989]

Originally Posted by Beejay51

Mine came fitted with chrome but was toying changing to black as everything else is black.Changed wing mirror covers to the M series black and fitted smoked dynamic turn signal to mirrors.
Had you thought on chrome to kind of mix with wheels,are the front grills gloss black or door trims black?If you are going for all black look personally i would take gloss black.

I didn’t want chrome because I felt it would stick out too much.

My grills and calipers are gloss, window trim and m performance trim are matte.