F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Today's Posts
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > Wheels and Tires -- Sponsored by The Tire Rack > F30 19" wheel offset
Studio RSR
Post Reply
 
Thread Tools Search this Thread
      05-10-2012, 11:33 AM   #23
Blake P
Kinda Like A Big Deal
United_States
10
Rep
390
Posts

Drives: F31 on order
Join Date: Sep 2011
Location: Fresno, CA

iTrader: (0)

Quote:
Originally Posted by HiTek View Post
They are all 5 X 120 After speakin with the seller. Below are the measurements for the offset. The measurements are from the mounting surface to the back of the rim.

Front -8.5"- 6.125" (15.6cm)
Rear -10"-6.875" (17.5cm)

There are two 20mm aluminum spacers for the rear included if I require them.
If those measurements are correct, that makes both the front and rear offset ET47.625, which just might work. I'm not familiar with how much room is in the rear fenders, so you might want to ask LTBMW, since I think they're the only ones running extremely aggressive rear wheels and offset. The fronts will fit without any issue, though.
Appreciate 0
      10-03-2013, 11:51 AM   #24
Jonny79
Registered
0
Rep
1
Posts

Drives: BMW 320i
Join Date: Oct 2013
Location: Vienna, Austria

iTrader: (0)

Alloy wheels offset

Hi Guys,

I need your advice on buying alloy wheels. I live in Austria and got my BMW F30 320i a few months back...have to switch to winter tyres in around 4 weeks.
I have been looking around to get complete winter tyres preferably 225/45 R18...the ones BMW sells are way expensive.
The ones I have found at few shops have rim offsets of 35mm whereas, BMW recommends 34mm for front and rears. Does that make any difference?

Thanks
Appreciate 0
      01-13-2014, 12:21 PM   #25
ocarioca1m
New Member
Brazil
1
Rep
22
Posts

Drives: 335i
Join Date: Aug 2013
Location: Brazil

iTrader: (0)

Sorry for bringing this thread back to life.
Looking to buy a set of M5 reps sizes are Front 19x8,5 ET 35 Rear 19x9,5 ET37
I see they're a bit different from oem offset. Would that cause any problem?
Thanks
__________________
Current: 2012 335i Sport Melbourne Red
Mods: Jb4 / BMS Intake / Challenge HFC DP/ ER Charge Pipe / M-Performance Exhaust / Dinan Suspension /M6 19" Reps
Rip: 1M
Appreciate 0
      01-13-2014, 02:50 PM   #26
.BMW.
Major General
.BMW.'s Avatar
Sweden
1863
Rep
5,140
Posts

Drives: BMW F11/F31
Join Date: Jun 2013
Location: Sweden

iTrader: (0)

Quote:
Originally Posted by ocarioca1m View Post
Sorry for bringing this thread back to life.
Looking to buy a set of M5 reps sizes are Front 19x8,5 ET 35 Rear 19x9,5 ET37
I see they're a bit different from oem offset. Would that cause any problem?
Thanks
The front is perfectly fine. 9.5x19" ET37 rear is a bit aggressive, but nothing extreme.

What tire sizes do you plan to mount?

OEM 19" staggered tires 225/40-19 front and 255/35-19 rear will work with your offsets and fit nice on 8.5" and 9.5" wide wheels. If you want to go with a wider rear tire you might need to adjust camber.
Appreciate 0
      01-14-2014, 03:08 AM   #27
ocarioca1m
New Member
Brazil
1
Rep
22
Posts

Drives: 335i
Join Date: Aug 2013
Location: Brazil

iTrader: (0)

I was thinking.

F: 8.5x19", 245/35-19
R: 9.5x19", 275/30-19

I could use some extra rubber jb4 and downpipe going in soon...
Suspension is stock.
__________________
Current: 2012 335i Sport Melbourne Red
Mods: Jb4 / BMS Intake / Challenge HFC DP/ ER Charge Pipe / M-Performance Exhaust / Dinan Suspension /M6 19" Reps
Rip: 1M

Last edited by ocarioca1m; 01-14-2014 at 03:13 AM..
Appreciate 0
      01-14-2014, 08:59 AM   #28
.BMW.
Major General
.BMW.'s Avatar
Sweden
1863
Rep
5,140
Posts

Drives: BMW F11/F31
Join Date: Jun 2013
Location: Sweden

iTrader: (0)

275 rear will work on stock Sport Suspension. But the rear tire may visually be a tad bit outside the fender.

Here is a member with 9.5x19" ET35 and 275 rear:f30post.com
Appreciate 0
      01-15-2014, 02:32 PM   #29
paperplanes415
Private First Class
paperplanes415's Avatar
No_Country
13
Rep
148
Posts

Drives: 2021 M8 GC
Join Date: Jun 2013
Location: San Francisco

iTrader: (1)

Garage List
Quote:
Originally Posted by carlosalbertogui
Quote:
Originally Posted by bp1996_335i View Post
Dear all,

Anyone can give me a hand.

I am still struggling I can use my old rims or not. I go thru the forum and found that the new wheel offset for 19" is

Front 8X19 offset 36
Rear 8.5X19 offset 47

My old rims are on my current E90 which is
Front 8.5X19 offset 32
Rear 9.5X19 offset 25

I am not sure is it fit or not. will the rear extend too much and rub? As I really want to keep my old rims.
hi not sure about F30 offset but i can tell you that

front are fine no problem

rear better use 20mm spacer and your good too go
you will have an offset of 45 pretty close to 47 so is a gogo

best luck

bolts always the same in diameter can be bigger in lenght but dont know
using the 20mm spacer should have bigger bolts in lenght
If you use a 20mm spacer the rear will turn into +5 not +45. A spacer pushes the wheel further out LOL.
Appreciate 0
      01-03-2015, 04:41 PM   #30
asaraiva
Registered
0
Rep
1
Posts

Drives: F30 320i
Join Date: Aug 2014
Location: Rio de Janeiro - Brazil

iTrader: (0)

I am planning to use the same wheels (M5 reps) but still not sure if I get:

Front: 8.5x19 ET37 + 225/40-19
Rear: 9.0x19 ET44 + 255/35-19

or

Front: 8.5x19 ET37 + 235/35-19
Rear: 9.5x19 ET44 + 265/30-19

Any advice about those options?
Appreciate 0
      07-08-2015, 09:13 PM   #31
iconoclast
Self-Deprecating Narcissist
iconoclast's Avatar
No_Country
7263
Rep
6,561
Posts

Drives: Audi BMW Ferrari LR MB
Join Date: Jan 2014
Location: In, Out & Around...

iTrader: (1)

I have a set of custom made BBS LM that I have installed on my E46 M3. I may be taking them off to install something different. Does anyone know if the specs below would work on an F31?

-Front: 19x8.5 ET32 / 245.35.19
-Rear: 19x10 ET25 / 275.30.19

If not would the OEM E46 M3 wheels work?

-Front: 19x8 ET47 / 225.40.19
Rears: 19x9.5 ET27 / 255.35.19
Appreciate 0
      05-30-2017, 07:48 AM   #32
Keepitbrutal
Registered
4
Rep
3
Posts

Drives: F30 328
Join Date: May 2017
Location: Moscow

iTrader: (0)

Hello! Guys, help me pls!
Could u tell me if r18 8.5j et 13 with 225/45/18 will fit f30 with mpe -20 mm suspension?
I know that Avant Garde m310 r19 9.5j et 33 with 255/35 fit the rear axle ok.
Comparing to them my estimated setup goes +5 mm on the fender side.
So probably the rears gonna fit ok im not sure.
And ive got no idea about front wheels.
Hoping for ur help!
Appreciate 0
Post Reply

Bookmarks

Tags
f30 whee offset, f30 wheel offsets, f30 wheel specs, f30 wheels


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:03 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST