[Sammysaleem]

M Performance Gloss Black Front Lip - Sold!!!
M Performance Carbon Rear Spoiler - Sold!!!
M Performance Gloss Black Grilles - Sold!!!
M Performance Front and Rear Mats - Sold!!!

All items are genuine Bmw parts purchased from the dealership... I have a copy of the invoice for proof if needed

All above parts are also maximum 3 months old and were purchased new. The front lip is painted gloss black to match the grilles.

All in immaculate condition apart from Front lip where it has scrapes underneath the lip due to speed bumps but have not damaged the lip.
The reason for Sale is due to the car up for sale.

[Drek]

If you end up selling them separately I may be interested in the front lip/splitter.

[F15CCT]

If you split I will have the sills mate

[Daftasabrush]

Good luck getting the front splitter off without any damage if it has been installed properly. I would fully expect to have to respray at least some of the front bumper, and the splitter may not survive either. I wouldn't bother if it was me. That being said, if betalink wasn't used, it may come off fine.

[Drek]

Originally Posted by Daftasabrush

Good luck getting the front splitter off without any damage if it has been installed properly. I would fully expect to have to respray at least some of the front bumper, and the splitter may not survive either. I wouldn't bother if it was me. That being said, if betalink wasn't used, it may come off fine.

Hmm, good point. I was going to respray a different colour anyway but now I think about it if they're put on properly aren't they damn near impossible to get off?

[Sammysaleem]

Originally Posted by Daftasabrush

Good luck getting the front splitter off without any damage if it has been installed properly. I would fully expect to have to respray at least some of the front bumper, and the splitter may not survive either. I wouldn't bother if it was me. That being said, if betalink wasn't used, it may come off fine.

Mines are just installed with the clips provided by Bmw and it's also been removed before from the car as 2 clips ended up snapping so will come off fine and wouldn't put beta link on the car as I know it would rip the paint off which I don't want haha... the paint will be fine and also the lip just the clips may be damaged but I have genuine new ones to go with it.

[Ajs_435d]

I'd be interested in rear mats if you split.

[C120CKA]

I could be interested in the front grilles

[Colmsport]

Hiya,

Could be interested in the rear boot spoiler if you decide to split....

Cheers

[BrennanF30]

How much for the side sill extensions?

[SkyJawa]

Originally Posted by Daftasabrush

Good luck getting the front splitter off without any damage if it has been installed properly. I would fully expect to have to respray at least some of the front bumper, and the splitter may not survive either. I wouldn't bother if it was me. That being said, if betalink wasn't used, it may come off fine.

This.

from the install post:

"◦If you had a previous lip attached by a dealer, most likely, they will have used beta-link to attach the Lip to the bumper. Its nasty stuff, that’s almost impossible to take off. Use a plastic trim tool to carefully remove the old glue, being careful not to scratch the bumper, but try to take off as much as possible. You’ll want a clean, smooth bumper to allow the double-sided tape to adhere properly to the surface of the bumper’s apron. Use of Goo Gone and 70% Isopropyl Alcohol is also useful to clean area of old glue, tape residue, and any/all other debris that could interfere with the double-sided tape you will be applying here. "

[Sammysaleem]

Originally Posted by SkyJawa

This.

from the install post:

"◦If you had a previous lip attached by a dealer, most likely, they will have used beta-link to attach the Lip to the bumper. Its nasty stuff, that’s almost impossible to take off. Use a plastic trim tool to carefully remove the old glue, being careful not to scratch the bumper, but try to take off as much as possible. You’ll want a clean, smooth bumper to allow the double-sided tape to adhere properly to the surface of the bumper’s apron. Use of Goo Gone and 70% Isopropyl Alcohol is also useful to clean area of old glue, tape residue, and any/all other debris that could interfere with the double-sided tape you will be applying here. "

It's a good thing I never got it fitted from the dealer haha ... I purchased the kit after I had bought the car so none of the kit was fitted from BMW whewww. It's just stick on with the clips and double sided tape.

[CazuaLLUK]

Originally Posted by Sammysaleem

It's a good thing I never got it fitted from the dealer haha ... I purchased the kit after I had bought the car so none of the kit was fitted from BMW whewww. It's just stick on with the clips and double sided tape.

Check you PM

[Sammysaleem]

Originally Posted by CazuaLLUK

Check you PM

Pmd

Will be happy to split all the parts if you guys can just pop me a message so I can I can reply with a price and more pictures.. ..

Also the rear diffuser is for a twin pipe backbox for 330d,335d just in case if anyone wants to know

[DarCol]

If the diffuser is in immaculate condition with no marks I would be interested.

[Sammysaleem]

Originally Posted by Dazzer

If the diffuser is in immaculate condition with no marks I would be interested.

Yeah the rear diffuser is immaculate no marks at all. Can send closer and clearer pics when removed if interested?

Thanks

[Greg666]

PM sent

[DarCol]

Originally Posted by Sammysaleem

Yeah the rear diffuser is immaculate no marks at all. Can send closer and clearer pics when removed if interested?

Thanks

Yes please.

Thanks.

[Ajs_435d]

How much for rear mats?

[Sammysaleem]

Diffuser Sold!!

Mats won't be separated selling as full set

And also the kit has been taken off so clear pictures are available if anyone wants them please pm me.

[Greg666]

How much for the grilles?

[Sammysaleem]

Originally Posted by Greg666

How much for the grilles?

Pmd