[328iking]

Most cars I owned had a tripometer in the cluster which resets on every journey (when ignition turned off) along with avg mpg etc.

Is there a way to turn a tripometer feature in the cluster via bimmercode?

[eleven11]

Originally Posted by 328iking

Most cars I owned had a tripometer in the cluster which resets on every journey (when ignition turned off) along with avg mpg etc.

Is there a way to turn a tripometer feature in the cluster via bimmercode?

Just in case you're not familiar, you can cycle through various data (average fuel consumption, current fuel consumption, etc.) by pressing the top button of your signal lever. I'm not sure if you can instruct it to reset for each trip directly from the cluster. However, this is possible in iDrive under the Trip Computer settings (automatic reset requires 4 hours of vehicle inactivity, I believe).

[328iking]

Originally Posted by eleven11

Just in case you're not familiar, you can cycle through various data (average fuel consumption, current fuel consumption, etc.) by pressing the top button of your signal lever. I'm not sure if you can instruct it to reset for each trip directly from the cluster. However, this is possible in iDrive under the Trip Computer settings (automatic reset requires 4 hours of vehicle inactivity, I believe).

Yeah I seen it in idrive (pretty crap there tbh). I know you can cycle through options via the indicator stalk that's why was wondering if I can add the tripometer there (where it normally should be)