[Amazinjoey]

Hi!

Has anyone experience a shrunken windows seal? My rear ones have shrunken quite a bit and I can't really find replacement in realOEM(or don't know what to choose)

[frchdragon]

01 Window guide, left rear door 1 51357258327
01 Window guide, right rear door 1 51357258328

I think that these are the p/n... I have the same issue, but I am not going change it. Doesn't seem to create any wind noise so I will leave it be.

[Amazinjoey]

Originally Posted by frchdragon

01 Window guide, left rear door 1 51357258327
01 Window guide, right rear door 1 51357258328

I think that these are the p/n... I have the same issue, but I am not going change it. Doesn't seem to create any wind noise so I will leave it be.

You are lucky! Mine create one hell of a wind noise... Question is if it's possible to heat them and extend them(?)

[frchdragon]

Originally Posted by Amazinjoey

You are lucky! Mine create one hell of a wind noise... Question is if it's possible to heat them and extend them(?)

I don't think so... they have to be replaced. This is a huge oversight from BMW... but at least we don't have dead pixels on clusters anymore.
Can they fix problems with mirrors yet?

[Hali_Mark]

Originally Posted by Amazinjoey

You are lucky! Mine create one hell of a wind noise... Question is if it's possible to heat them and extend them(?)

yes you can heat and stretch them back out. I did and it worked well. I pulled them out of the channel a bit on the top and down the side that's short, and used a heat gun to warm them up. I then stretched them to proper length and used some automotive adhesive to help secure them. Masking tape helped hold them in place while it cured.