[Johnny250]

Originally Posted by N0Chill 335i

You'll need some camber but you shouldn't have much issues besides that. I'm lower than I wanted to be and I have no problems with rubbing.

Waiting for my vorshlag camber plates for the front and the rear is already at -2.6

[N0Chill 335i]

Originally Posted by KhanArt

Damn that looks good! I need to get wheels and lower mine.

Thank you sir.

Originally Posted by theEZV

Can I ask what you paid? I've called a few places and some of the quotes were outrageous. PM if you don't want to say publicly.

$550 with adjustments and alignment.

Originally Posted by Johnny250

Waiting for my vorshlag camber plates for the front and the rear is already at -2.6

Nice. You'll be fine then. I mean some tires run meatier than others so that may be your only issue. But with some tweaking you should be good to go. My rears are rolled too, maybe like an extra 3-5mm of clearance.

[Rayzor]

Stunning, you sir have good taste

[N0Chill 335i]

Originally Posted by Rayzor

Stunning, you sir have good taste

Thank you sir. Coming along slowly but surely.

[T0NE*F32]

Nice fitment bro! Didn't know the rears can be rolled on f30's.. Can you show a shot of it? I'm currently running 19x9.5 et 30 on 255-35-19 with -3.3 camber and it rubs on certain bumps

[BlueCrabMafia]

Looks amazing!

A word of caution with the camber you're running. I had -2.3 degrees of camber on my rears (lowered on PSS B14's) and I burned through a set of rear tires in 5K miles. Not even kidding.

I would run really high tire pressures on your tires and check the wear often.

[CJ421]

Your car looks awesome!
I really like the wheels.

Charles

[N0Chill 335i]

Originally Posted by T0NE*f30

Nice fitment bro! Didn't know the rears can be rolled on f30's.. Can you show a shot of it? I'm currently running 19x9.5 et 30 on 255-35-19 with -3.3 camber and it rubs on certain bumps

The rear panels are pretty flat, when they were rolled it slightly pulled them like 5mm or so. It also depends on your tires. Not all sidewalls are made the same, some are much thicker than others. I'll try and get a pic tomorrow to upload.

Originally Posted by BlueCrabMafia

Looks amazing!

A word of caution with the camber you're running. I had -2.3 degrees of camber on my rears (lowered on PSS B14's) and I burned through a set of rear tires in 5K miles. Not even kidding.

I would run really high tire pressures on your tires and check the wear often.

I'm good bro. I've run much more camber than this and more stretch with higher PSi and had no issues. My last setup was -3.5 all around at 1 point and I got 20K miles out of them. Simply flipped them every oil change. You either drive VERY aggressively or your toe was out of wack. Toe kills tires much faster than camber.

Originally Posted by CJ421

Your car looks awesome!
I really like the wheels.

Charles

Thank you sir. A few more mods to come before the end of the year.

[N0Chill 335i]

I'm not feeling the uneven camber, I'm all about symmetry. Either gonna throw a larger spacer up front and add in some negative camber to match the rears. Or I'm gonna put a smaller spacer in the back and reduce the camber to match the fronts. The car sits at the same height front and rear but it's giving me a reverse rake look and I'm not with it. Gonna raise the rears about half an inch when I make the final adjustments. Other than that stuff, I'm extremely happy with the way it's coming together.

[JJaber]

Looks great man!

[N0Chill 335i]

Did a test shoot last night to get back in the game. I remember now why I don't use my kit lens anymore. I'll be sticking to the 50mm from here on out. Far looks clean and edits well, so I'm happy so far. The uneven drop due to BMW's reversed rake look is bothering me. Anywho... Enjoy the pics.

[LRW70]

Beautiful build!

[N0Chill 335i]

Originally Posted by LRW70

Beautiful build!

Thank you sir. Was supposed to be having another night shoot session but it's raining like crazy in my area...

[N0Chill 335i]

Made a few minor adjustments to the car. I was having a shit ride with the crappy 10k BC springs in the rear on the extreme low kit. I swapped those turds out for my old swift 20k springs, it reads so much better now. I threw 10mm spacers in the fronts to match the fitment in the rears. It's still not where I want it, may throw the 12.5mm in there next week. Raised the rears about .75" to get rid of the reversed rake as well.

Decided to have another night time shoot so I got her cleaned up last night.







Also put my tints back on this morning, but no pics of that yet. I was running late for work this afternoon.

[N0Chill 335i]

Picture of the tints on. Decided to go with 35% all around this time instead of 20%. I don't feel like dealing with the cops in my area. You can also see the difference in the rear compared to the original installation.

[N0Chill 335i]

New pics...

[KhanArt]

Looks so good! Wait I just noticed the exhaust, will that work on a stock diffuser? I need to go back through your thread and find out more about this

[UKF30]

Originally Posted by N0Chill 335i

New pics...

Bravo Sir , that's one good looking F30 and you know how to take pics

[F30_SixSpeed]

Car looks badass my man!! Very clean

[N0Chill 335i]

Originally Posted by KhanArt

Looks so good! Wait I just noticed the exhaust, will that work on a stock diffuser? I need to go back through your thread and find out more about this

The quad exhaust diffuser bolts right on in place of the OEM part. Custom exhaust to the quad tips with a little poke.

Originally Posted by UKF30

Bravo Sir , that's one good looking F30 and you know how to take pics

Thank you kind sir. She's coming along. That shoot was a bit difficult with the uneven light source, but I'm happy with the results.

Originally Posted by F30_SixSpeed

Car looks badass my man!! Very clean

[takeshirejs]

absolutly pornografic, love it, the carbon details,

why you changed red leather to black interior ?

Im sorry if is somewhere written

[N0Chill 335i]

Originally Posted by takeshirejs

absolutly pornografic, love it, the carbon details,

why you changed red leather to black interior ?

Im sorry if is somewhere written

Thanks. No carbon, gloss black. I changed it because I pretty much despise primary colors. The red will clash with the green accents that are coming in the future.