BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

reddragon2282 · 02-16-2021, 05:30 PM

shawnsheridan Please send the E-Sys instructions and download if you get some free time. Thanks!

Can I also get the most up to date psdzdata for my 2014 f32 4 series.

You are truly a legend.

shawnsheridan · 02-16-2021, 05:34 PM

Quote:

Originally Posted by reddragon2282

shawnsheridan Please send the E-Sys instructions and download if you get some free time. Thanks!

Can I also get the most up to date psdzdata for my 2014 f32 4 series.

You are truly a legend.

PM sent.

erikasbrz · 02-17-2021, 06:42 AM

Hi all,

Maybe I could find some help for bringing default settings to the REM.

After messing with rear lamps (to be turned on in the day time) via bimmercode, the PDC stopped working and shows error "no parking assistance, please park unaided."

Now I see that i get an error REM 8032C0 via diagnostic tool.

I have tried to "code" back to default REM via ESYS with psdzdata (Read VO, Activate FA, Read ECU, Right click on REM ECU, Code). Where results were successful, although nothing has changed. (still got the same PDC error)

I have noticed that while "coding" there is a note that "VCM update is deactivated, so it was not updated"

Do I need to do something else to bring REM ECU values to default (such as Detect CAF for SWE)? I have checked my VO from VIN and it has opt 508 (PDC front and back, w/o camera)

If I am missing any step in the coding workflow, please write me every single step i should do (and if i need to mess around with VCM or MSN options).

N47 F31 2014
Thank you in advance!

millerjustinw · 02-19-2021, 03:21 PM

I just bought a new-to-me 2017 440i and I'm excited to get started with some coding changes. Can you please help me get the appropriate E-sys, Launcher and psdzdata for my car?

Thank you!

shawnsheridan · 02-19-2021, 03:50 PM

Quote:

Originally Posted by erikasbrz

Hi all,

Maybe I could find some help for bringing default settings to the REM.

After messing with rear lamps (to be turned on in the day time) via bimmercode, the PDC stopped working and shows error "no parking assistance, please park unaided."

Now I see that i get an error REM 8032C0 via diagnostic tool.

I have tried to "code" back to default REM via ESYS with psdzdata (Read VO, Activate FA, Read ECU, Right click on REM ECU, Code). Where results were successful, although nothing has changed. (still got the same PDC error)

I have noticed that while "coding" there is a note that "VCM update is deactivated, so it was not updated"

Do I need to do something else to bring REM ECU values to default (such as Detect CAF for SWE)? I have checked my VO from VIN and it has opt 508 (PDC front and back, w/o camera)

If I am missing any step in the coding workflow, please write me every single step i should do (and if i need to mess around with VCM or MSN options).

N47 F31 2014
Thank you in advance!

VO Coding REM (Right-Click => CODE) with original unmodified FA resets REM to factory coding. There is no more to do.

shawnsheridan · 02-19-2021, 03:53 PM

Quote:

Originally Posted by millerjustinw

I just bought a new-to-me 2017 440i and I'm excited to get started with some coding changes. Can you please help me get the appropriate E-sys, Launcher and psdzdata for my car?

Thank you!

PM sent.

tijsva · 02-20-2021, 02:40 AM

Hi All,

I'm new to this forum. I see that there's a lot of info to be found on coding. I have recently purchased an FLA mirror for my F30 330e (2016), bought the new steering wheel ring with FLA button, wired up everything, only needs coding.

I tried using esys 3.25, but I believe that the PsdZData is too old for my car (51.3). Can somebody confirm if this is the case? Much appreciated.

drink · 02-20-2021, 03:55 AM

Hi all,

I'd like to code my F20 - might anybody can share a working version of Esys and Launcher?
Thank you very much!

shawnsheridan · 02-20-2021, 10:57 AM

Quote:

Originally Posted by tijsva

Hi All,

I'm new to this forum. I see that there's a lot of info to be found on coding. I have recently purchased an FLA mirror for my F30 330e (2016), bought the new steering wheel ring with FLA button, wired up everything, only needs coding.

I tried using esys 3.25, but I believe that the PsdZData is too old for my car (51.3). Can somebody confirm if this is the case? Much appreciated.

Quote:

Originally Posted by drink

Hi all,

I'd like to code my F20 - might anybody can share a working version of Esys and Launcher?
Thank you very much!

PM's sent.

IAM_Mike · 02-22-2021, 06:18 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by tijsva

Hi All,

I'm new to this forum. I see that there's a lot of info to be found on coding. I have recently purchased an FLA mirror for my F30 330e (2016), bought the new steering wheel ring with FLA button, wired up everything, only needs coding.

I tried using esys 3.25, but I believe that the PsdZData is too old for my car (51.3). Can somebody confirm if this is the case? Much appreciated.

Quote:

Originally Posted by drink

Hi all,

I'd like to code my F20 - might anybody can share a working version of Esys and Launcher?
Thank you very much!

PM's sent.

Hi Shawn,

Can you send link to psdzdata for 2017 f30?

shawnsheridan · 02-22-2021, 07:27 PM

Quote:

Originally Posted by IAM_Mike

Hi Shawn,

Can you send link to psdzdata for 2017 f30?

I replied to your same PM.

mike5124 · 02-23-2021, 08:51 PM

Hello, thank you for the E-sys links and instructions before, but I think the links expired.

Is it possible you can send me the up-to-date psdzdata again, both lite and full? I would appreciate it, thank you so much.

shawnsheridan · 02-23-2021, 08:54 PM

Quote:

Originally Posted by mike5124

Hello, thank you for the E-sys links and instructions before, but I think the links expired.

Is it possible you can send me the up-to-date psdzdata again, both lite and full? I would appreciate it, thank you so much.

If you have Full, there is Zero reason to also have Lite, and not that you would ever need it, but you could just make Lite from full. PM sent.

ksiftilla · 02-26-2021, 03:54 PM

Hello,I just clicked to ecu and code enire ECU`s in my vehicle. when im trying to code my hu for alpine retrofit. Now i have a limp mode. I searched for solution in all forums but cannot find a solution. Only thing i found is ``Detect CAF for SWE`` button to fix my DME. But that button is grayed out. Can I do this with new esys and/or new Psdzdata?
I m newbei in coding. Thanks for help.

shawnsheridan · 02-27-2021, 04:56 AM

Quote:

Originally Posted by ksiftilla

Hello,I just clicked to ecu and code enire ECU`s in my vehicle. when im trying to code my hu for alpine retrofit. Now i have a limp mode. I searched for solution in all forums but cannot find a solution. Only thing i found is ``Detect CAF for SWE`` button to fix my DME. But that button is grayed out. Can I do this with new esys and/or new Psdzdata?
I m newbei in coding. Thanks for help.

I replied to your same PM.

GDLF. · 02-27-2021, 07:42 AM

Hey shawnsheridan - would need newest E-Sys version including instructions (I'm still on 3.27 lol) plus latest psdzdata. Need to code our M240 in a few days.

shawnsheridan · 02-27-2021, 02:03 PM

Quote:

Originally Posted by GDLF.

Hey shawnsheridan - would need newest E-Sys version including instructions (I'm still on 3.27 lol) plus latest psdzdata. Need to code our M240 in a few days.

E-Sys 3.27.1 remains preferred for coding. PM sent.

f304dr · 02-27-2021, 10:25 PM

I had the auto stop start coded out since the summer of last year and worked great, yesterday the car randomly kept putting itself into stop start mode? It was at the beginning of the last bar of fuel so it may just be conserving but it kept happening after fuel up and I've previously ran the fuel even lower and it never happened. If I restarted the car in park it would run fine but as soon as I would engage drive it started again.

Going to try recoding it, any ideas otherwise?

Jack_77 · 03-02-2021, 11:05 AM

Hi shawnsheridan could i get a PM with E-Sys download link and instructions too ?

Thanks in advance

shawnsheridan · 03-02-2021, 11:40 AM

Quote:

Originally Posted by Jack_77

Hi shawnsheridan could i get a PM with E-Sys download link and instructions too ?

Thanks in advance

PM sent.

Jack_77 · 03-02-2021, 01:22 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Muchas Gracias !

kirk005 · 03-05-2021, 02:40 AM

Greetings shawnsheridan, could you please send me the software link? Cheers!

02-16-2021, 05:30 PM	#15709
reddragon2282 Registered 0 Rep 2 Posts Drives: 420D M-SPORT XDrive Join Date: Sep 2018 Location: Cardiff iTrader: (0)	shawnsheridan Please send the E-Sys instructions and download if you get some free time. Thanks! Can I also get the most up to date psdzdata for my 2014 f32 4 series. You are truly a legend.
	Appreciate 0 Quote

02-17-2021, 06:42 AM	#15711
erikasbrz Registered 0 Rep 2 Posts Drives: F31 Join Date: Feb 2021 Location: Lithuania iTrader: (0)	Hi all, Maybe I could find some help for bringing default settings to the REM. After messing with rear lamps (to be turned on in the day time) via bimmercode, the PDC stopped working and shows error "no parking assistance, please park unaided." Now I see that i get an error REM 8032C0 via diagnostic tool. I have tried to "code" back to default REM via ESYS with psdzdata (Read VO, Activate FA, Read ECU, Right click on REM ECU, Code). Where results were successful, although nothing has changed. (still got the same PDC error) I have noticed that while "coding" there is a note that "VCM update is deactivated, so it was not updated" Do I need to do something else to bring REM ECU values to default (such as Detect CAF for SWE)? I have checked my VO from VIN and it has opt 508 (PDC front and back, w/o camera) If I am missing any step in the coding workflow, please write me every single step i should do (and if i need to mess around with VCM or MSN options). N47 F31 2014 Thank you in advance!
	Appreciate 0 Quote

02-19-2021, 03:21 PM	#15712
millerjustinw Registered 0 Rep 3 Posts Drives: BMW 440i Join Date: Feb 2021 Location: Raleigh, NC iTrader: (0)	I just bought a new-to-me 2017 440i and I'm excited to get started with some coding changes. Can you please help me get the appropriate E-sys, Launcher and psdzdata for my car? Thank you!
	Appreciate 0 Quote

02-20-2021, 02:40 AM	#15715
tijsva Registered 0 Rep 1 Posts Drives: BMW F30 330e Join Date: Feb 2021 Location: Prinsenbeek iTrader: (0)	Hi All, I'm new to this forum. I see that there's a lot of info to be found on coding. I have recently purchased an FLA mirror for my F30 330e (2016), bought the new steering wheel ring with FLA button, wired up everything, only needs coding. I tried using esys 3.25, but I believe that the PsdZData is too old for my car (51.3). Can somebody confirm if this is the case? Much appreciated.
	Appreciate 0 Quote

02-20-2021, 03:55 AM	#15716
drink Registered 0 Rep 1 Posts Drives: BMW F20 Join Date: Feb 2021 Location: Austria iTrader: (0)	Hi all, I'd like to code my F20 - might anybody can share a working version of Esys and Launcher? Thank you very much!
	Appreciate 0 Quote

02-23-2021, 08:51 PM	#15720
mike5124 Private First Class 38 Rep 144 Posts Drives: 2006 BMW 325i (E90) Join Date: Feb 2020 Location: NJ iTrader: (0) Garage List 2006 BMW 325i [0.00]	Hello, thank you for the E-sys links and instructions before, but I think the links expired. Is it possible you can send me the up-to-date psdzdata again, both lite and full? I would appreciate it, thank you so much.
	Appreciate 0 Quote

02-26-2021, 03:54 PM	#15722
ksiftilla Registered 0 Rep 1 Posts Drives: f30 320ied Join Date: Feb 2021 Location: greece iTrader: (0)	Hello,I just clicked to ecu and code enire ECU`s in my vehicle. when im trying to code my hu for alpine retrofit. Now i have a limp mode. I searched for solution in all forums but cannot find a solution. Only thing i found is ``Detect CAF for SWE`` button to fix my DME. But that button is grayed out. Can I do this with new esys and/or new Psdzdata? I m newbei in coding. Thanks for help.
	Appreciate 0 Quote

02-27-2021, 07:42 AM	#15724
GDLF. Enlisted Member 14 Rep 44 Posts Drives: 2019 G01 X3 M40i Join Date: Nov 2016 Location: West Germany, NRW iTrader: (0)	Hey shawnsheridan - would need newest E-Sys version including instructions (I'm still on 3.27 lol) plus latest psdzdata. Need to code our M240 in a few days.
	Appreciate 0 Quote

02-27-2021, 10:25 PM	#15726
f304dr Enlisted Member 3 Rep 32 Posts Drives: 328xi Join Date: Jul 2020 Location: Canada iTrader: (0)	I had the auto stop start coded out since the summer of last year and worked great, yesterday the car randomly kept putting itself into stop start mode? It was at the beginning of the last bar of fuel so it may just be conserving but it kept happening after fuel up and I've previously ran the fuel even lower and it never happened. If I restarted the car in park it would run fine but as soon as I would engage drive it started again. Going to try recoding it, any ideas otherwise?
	Appreciate 0 Quote

03-02-2021, 11:05 AM	#15727
Jack_77 Registered 0 Rep 2 Posts Drives: BMW X3 F25 Join Date: Mar 2021 Location: Germany iTrader: (0)	Hi shawnsheridan could i get a PM with E-Sys download link and instructions too ? Thanks in advance
	Appreciate 0 Quote

03-05-2021, 02:40 AM	#15730
kirk005 New Member 0 Rep 10 Posts Drives: BMW M340i, 335i (gone) Join Date: Jul 2013 Location: SJ, CA iTrader: (0) Garage List 2020 BMW M340i [0.00]	Software link please Greetings shawnsheridan, could you please send me the software link? Cheers!
	Appreciate 0 Quote